In order to keep card endurance, it is best not to check the need for
BKOPS every time the MMC is idle.
However, the decision when to check the card need for BKOPS according
to number of changed sectors doesn't fit all cards sizes. Therefore,
the check for BKOPS need is based on percentages of changed sectors
of the card size.
In order to assure that BKOPS will be triggered again in case it was
interrupted, the accumulated number of changed sectors is cleared only
in case BKOPS was completed without interruption.
Change-Id: I598f64b652a524a431b87d103fd5890b808f11b1
Signed-off-by: Maya Erez <merez@codeaurora.org>
(cherry picked from commit e1eae988976536834759a45cf7f62e1cb2b82838)
BKOPS operations can take long time and cause bad user experience and
failure of time critical operations as EFS sync.
In order to prevent the above failures all the levels will be handled only
in idle time BKOPS handling and will allow interrupting the BKOPS when
needed.
In case the card raised an exception with a need for BKOPS, a flag will
be set to indicate MMC to start the BKOPS activity when it becomes idle.
Fixed-CRs: 432027
Change-Id: I5f7b43569c0242f0fea83355f76f286b1ad037bc
Signed-off-by: Maya Erez <merez@codeaurora.org>
(cherry picked from commit 5f8ac3b955e44def61c2238192000ffe5f126714)
The timeout for the BKOPS polling is increased in order to allow the
card to complete the BKOPS before going to suspend.
In case we exit due to timeout we need to stop the BKOPS activity
performed by the card.
Change-Id: I39686de0c06a57242f11c8b1c9ae50b33417c088
Signed-off-by: Maya Erez <merez@codeaurora.org>
(cherry picked from commit ea1385e6d7542d4e3ad510de94ead00bece7823e)
In order to allow the card to perform BKOPS as early as possible without
causing degradation to a flow of requests, we reduce the time of the
BKOPS delayed work to 200ms.
Based on experience, 200ms will allow requests to be performed without
a delay of checking the BKOPS.
This patch also allows the host controller to set any other time if
required.
Change-Id: I1e56bfd0c9471abf4da50befe6d14fe0199129e7
Signed-off-by: Maya Erez <merez@codeaurora.org>
(cherry picked from commit 70b00220e7564b00e3b0747260fe2c2dbe62f45d)
Currently we have 4 mins timeout for the blocking BKOPs to complete
but we have seen instances where card is surprisingly taking even
longer time to complete background operations.
If card doesn't complete the BKOPs within specified timeout, we
will send the HPI command to interrupt the ongoing BKOPs.
Change-Id: I5df81bdfd9b19bee30a394ee0ff4390b292691d0
Signed-off-by: Subhash Jadavani <subhashj@codeaurora.org>
(cherry picked from commit 1b22222ec61924de9b8ac51f08de113548946eb5)
This patch fixes up the broken suspend sequence for eMMC with sleep
support. Additionally it reworks the eMMC4.5 Power Off Notification
feature so it fits together with the existing sleep feature.
The CMD0 based re-initialization of the eMMC at resume is re-introduced
to maintain compatiblity for devices using sleep.
A host shall use MMC_CAP2_POWEROFF_NOTIFY to enable the Power Off
Notification feature. We might be able to remove this cap later on,
if we think that Power Off Notification always is preferred over
sleep, even if the host is not able to cut the eMMC VCCQ power.
[merez@codeaurora.org: resolved various merge conflicts.
Fix in mmc_resume already exists]
(cherry picked from commit cec02a451276a70cdeb0576ec89d6b5b76e4e18b)
Change-Id: I4f29c213d745dcb1ec50b34b535657328042b4b2
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Saugata Das <saugata.das@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Chris Ball <cjb@laptop.org>
Signed-off-by: Tatyana Brokhman <tlinder@codeaurora.org>
Signed-off-by: Maya Erez <merez@codeaurora.org>
(cherry picked from commit 91cf2698afab3f0707f739a02eb639205798f1dc)
The version of PON support accepted by the linux community is
slightly different from the one that was merged. This revert is needed
in order to upload the latest version from the linux community.
This reverts commit 76058d7388c6edde07fd6289ce082dc1a1813b26.
(cherry picked from commit 8b458cf768db937d3a2274e216819a1a217e97f8)
Change-Id: I0cb611698b25de600dbaa54678edae661456e485
Signed-off-by: Tatyana Brokhman <tlinder@codeaurora.org>
(cherry picked from commit 6e3e74d3ba5c825108b0a63018376b12e61592f9)
This attribute is used to determine whether the status bit that
indicates the need for BKOPS should be checked. The value is stored in
this attribute represents the minimum number of sectors that needs to
be changed in the device (written or discarded) in order to require
the status-bit of BKOPS to be checked
(cherry picked from commit e6c6b4b14ac2f10aa34cf42b6f558152e438bb37)
Change-Id: I3b05a0826fc9397a13d6b03ee028293f877f8d66
Signed-off-by: Yaniv Gardi <ygardi@codeaurora.org>
(cherry picked from commit 15ecbe1c5f6b2f2af5974f23cd494fce0c5bf81a)
Devices have various maintenance operations need to perform internally.
In order to reduce latencies during time critical operations like read
and write, it is better to execute maintenance operations in other
times - when the host is not being serviced. Such operations are called
Background operations (BKOPS).
The device notifies the status of the BKOPS need by updating BKOPS_STATUS
(EXT_CSD byte [246]).
According to the standard a host that supports BKOPS shall check the
status periodically and start background operations as needed, so that
the device has enough time for its maintenance operations.
This patch adds support for this periodic check of the BKOPS status.
Since foreground operations are of higher priority than background
operations the host will check the need for BKOPS when it is idle,
and in case of an incoming request the BKOPS operation will be
interrupted.
When the mmcqd thread is idle, a delayed work is created to check the
need for BKOPS. The time to start the delayed work is calculated based
on the host controller suspend timeout, in case it was set. If not, a
default time is used.
If BKOPS are required in level 1, which is non-blocking, there will be
polling of the card status to wait for the BKOPS completion and prevent
suspend that will interrupt the BKOPS.
If the card raised an exception, the need for urgent BKOPS (level 2/3)
will be checked immediately and if needed, the BKOPS will be performed
without waiting for the next idle time.
(cherry picked from commit 5f360698caa2894f7cc854199ffba285241d152e)
Change-Id: I6605ce396188807bed93f437224f2243b178523f
Signed-off-by: Maya Erez <merez@codeaurora.org>
(cherry picked from commit 833940e728c5903f0263c20e349bbead7a79e535)
This patch adds "large sector size" as a reason for stop packing
to the packing statistics mechanism
(cherry picked from commit 1718ef21fb791a2ea25bd3fbf236913de64ca85f)
Change-Id: I595f7839fa9156d5ed26040943c1d5e3011c2a60
Signed-off-by: Tatyana Brokhman <tlinder@codeaurora.org>
(cherry picked from commit bd8d562c886ffe3a07b9a56a446eb5b5b7db23ed)
The write packing statistics are used for the packed commands unit tests
in order to determine test success or failure
(cherry picked from commit 464fbe1af0248b7e85044ccebf4d4d96dd8fdeaa)
Change-Id: If5465118e0ea1b4c78b73a43b664d5b6bc9cae31
Signed-off-by: Maya Erez <merez@codeaurora.org>
Signed-off-by: Tatyana Brokhman <tlinder@codeaurora.org>
(cherry picked from commit db2e25650ab5fb62143ff39fcaea083176403fd1)
The write packing control will ensure that read requests latency is
not increased due to long write packed commands.
The trigger for enabling the write packing is managing to pack several
write requests. The number of potential packed requests that will trigger
the packing can be configured via sysfs by writing the required value to:
/sys/block/<block_dev_name>/num_wr_reqs_to_start_packing.
The trigger for disabling the write packing is fetching a read request.
(cherry picked from commit 0cc76400d65f0d7b3f2f8f1ece3c8061652a35d7)
Change-Id: I51a44d2673e40e4e404317ddb632a9fb204e9a06
Signed-off-by: Maya Erez <merez@codeaurora.org>
Signed-off-by: Tatyana Brokhman <tlinder@codeaurora.org>
(cherry picked from commit fd402c28f1571b64f4d695d191778e9dd595806a)
This patch supports packed write command of eMMC4.5 device.
Several writes can be grouped in packed command and all data
of the individual commands can be sent in a single transfer
on the bus.
[tlinder@codeaurora.org: Difference in definition:
R1_EXP_EVENT -- > R1_EXCEPTION_EVENT]
(cherry picked from commit 53f8f574c6c68687098cd064af8224da44de2484)
Change-Id: I26ee7c0b957a3aec5e4ffc6d6df806ea38435784
Signed-off-by: Seungwon Jeon <tgih.jun@samsung.com>
Reviewed-by: Maya Erez <merez@codeaurora.org>
Reviewed-by: Namjae Jeon <linkinjeon@gmail.com>
Signed-off-by: Tatyana Brokhman <tlinder@codeaurora.org>
(cherry picked from commit 6d24bc3b6e86412cbfbc37377bbbf196cbdebce9)
This patch adds packed command feature of eMMC4.5.
The maximum number for packing read(or write) is offered
and exception event relevant to packed command which is
used for error handling is enabled. If host wants to use
this feature, MMC_CAP2_PACKED_CMD should be set.
(cherry picked from commit c70e9669bffa2f2ffe4d8f9768980e1cd08df4b2)
Change-Id: If3af1299c7dbdc9f66b13ec5b99038225d5b17f0
Signed-off-by: Seungwon Jeon <tgih.jun@samsung.com>
Reviewed-by: Maya Erez <merez@codeaurora.org>
Reviewed-by: Subhash Jadavani <subhashj@codeaurora.org>
Reviewed-by: Namjae Jeon <linkinjeon@gmail.com>
Signed-off-by: Tatyana Brokhman <tlinder@codeaurora.org>
(cherry picked from commit 458c9b55dd3e06d6cd36158bd96a6d4935ed4fea)
The version of packing support excepted by the linux community is
slightly different from the one that was merged. This revert is needed
in order to upload the latest version from the linux community.
This patch reverts the following commits:
1.mmc: card: Add eMMC4.5 write packed commands unit-tests
2.mmc: card: Fix packing control enabling algorithm
3.mmc: block: Add MMC write packing statistics
4.mmc: msm_sdcc: enable the write packing control
5.mmc: msm_sdcc: Enable write packing capability
6.mmc: block: Add write packing control
7.mmc: core: Support packed write command for eMMC4.5 device
8.mmc: core: Add packed command feature of eMMC4.5
(cherry picked from commit f94cf3da103b344b13fa4d6665fd21dad1b95ead)
Change-Id: I2efc6dc8d8f6d5cc7e9efa99ec74914ffff96fcd
commit: 9b54d88c6a11ebfe069b7fdebcb521da21754c3f
commit: e2ecb58a6c5011549aac3e86fb1c13e7b7c65104
commit: e544d700e2dac1584a8172c4dc347d81ede203bd
commit: 8afe8d2a98a1bbf3804162ff5c95a56226935f5a
commit: 25e2261a556c4393f79d58bce814bb3df34b9549
commit: 63c61d6d8b8f37c71b4162b3affffdf72ac06811
commit: 968c774ea6466fa7adbf2eac333220132acda306
commit: 516994eee39282b8648b509e449ff83b49833209.
Signed-off-by: Tatyana Brokhman <tlinder@codeaurora.org>
(cherry picked from commit 31fe84d6edae65f9df5663538e528697897be86e)
Signed-off-by: Maya Erez <merez@codeaurora.org>
If the card and the host support BKOPS, and BKOPS is not enabled
yet, set the BKOPS_EN bit to enable BKOPS.
This bit is one time programmable.
(cherry picked from commit e966c1ca32d118b26ca6e26267f0c13c9c0e0052)
Change-Id: I2b97898857bed676021fe56a6f6e49762cf609fa
Signed-off-by: Maya Erez <merez@codeaurora.org>
(cherry picked from commit 5ebe331e59e9c30bffead8e3030e3581ee699895)
Enable eMMC background operations (BKOPS) feature.
If URGENT_BKOPS is set after a response, note that BKOPS are required.
Immediately run BKOPS if required. Read/write operations should be
requested during BKOPS(LEVEL-1), then issue HPI to interrupt the
ongoing BKOPS and service the foreground operation.
(This patch only controls the LEVEL2/3.)
When repeating the writing 1GB data, at a certain time, performance is
decreased. At that time, card triggers the Level-3 or Level-2. After
running bkops, performance is recovered.
Future considerations:
* Check BKOPS_LEVEL=1 and start BKOPS in a preventive manner.
* Interrupt ongoing BKOPS before powering off the card.
* How do we get BKOPS_STATUS value (periodically send ext_csd command)?
* If using periodic bkops, also consider runtime_pm control.
(cherry picked from commit 6807769f7bf68984a5aeda4b9b521f1167cbaf00)
[merez@codeaurora.org: core.c: release_host when stopping BKOPs for
non SDIO cards in suspend]
(cherry picked from commit c1a56a1247341d13af7c8f84d5ac1211a3c4b376)
Change-Id: I5ac2ac909222e2b4e94cd97ce7da79f4488f06f0
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Konstantin Dorfman <kdorfman@codeaurora.org>
Reviewed-by: Maya Erez <merez@codeaurora.org>
Signed-off-by: Chris Ball <cjb@laptop.org>
Signed-off-by: Maya Erez <merez@codeaurora.org>
(cherry picked from commit 653abe2434532e4d2886d27dfdc3f42ae1c7ade1)
A newer version of BKOps should be picked from the community.
Therefore the old support is reverted.
Revert the following commits:
9db69fca22bd2970f6b14b50cf8533a1edb64364
8ac659eb3d96e31b8bb6b8d09143ddd6eb83ae19
f886c80ee2f4c29aeaab2d76c9303c00263bb428
(cherry picked from commit 3402d2b725a5af16bc62a2e788913a46d3f7e54a)
Change-Id: I5df105753bef7ee10215526006187673b85bb0c1
Signed-off-by: Maya Erez <merez@codeaurora.org>
(cherry picked from commit b5763af04035cd5e3264225f40270d175985adc5)
When the fault injection framework introduces an error to the data
block, the current code queries the SD card to find the number of
blocks actually programmed. This value would be as requested by the
generic block layer. So the entire request would be completed.
Say, request 0 is pulled from queue and submitted. When this is being
processed, request 1 is pulled from queue and prepared. Request 0
though is successful, fault-injection framework injects an error
and modifies the bytes_xferred variable to a random value less than
requested transfer. Request 1 is not processed and during the handling
of error, the SD card is queried for the actual bytes programmed. This
would be the correct value. Thus blk_end_request would complete
this request and the control would return to fetch request 2. In this
process, request 1 is not processed at all and the application waits
indefinitely for request 1 to be processed. No further requests are
issued to the queue.
This patch identifies, if the fault injection-framework has inserted an
error to this request and doesn't query the card and uses
bytes_xferred to complete the request.
Change-Id: I496802e244745bc7550402027a594d967cf7b756
Signed-off-by: Asutosh Das <asutoshd@codeaurora.org>
MMC_CAP2_POWER_OFF_VCCQ_DURING_SUSPEND and MMC_CAP2_PACKED_RD are defined
to the same value. Needs to give each one of them a unique number.
Change-Id: I5f55396075fbffdae305122cd8fbb9f4b056c751
Signed-off-by: Maya Erez <merez@codeaurora.org>
With commit c84f15ae, the default clock gating delay in mmc host
init is set to zero. For MSM targets this can cause huge
performance hit as sometimes the clocks are non-local and
requires a request to other subsystem leading to significant
roundtrip delay.
Fix this to have atleast 200msecs delay in turning off the sdcc
clocks after a request is completed.
Change-Id: I5f434cf98373154d817735dba8f5bc8810d27611
Signed-off-by: Sujit Reddy Thumma <sthumma@codeaurora.org>
Current implementation decides the card type exclusively. Even though
eMMC device can support both HS200 and DDR mode, card type will be
set only for HS200. If the host doesn't support HS200 but has DDR
capability, then DDR mode can't be selected.
Change-Id: Ifb5bb7fb0b7f4472734e10ec39d47e3f12e32cf8
Signed-off-by: Seungwon Jeon <tgih.jun@samsung.com>
Reviewed-by: Subhash Jadavani <subhashj@codeaurora.org>
Signed-off-by: Chris Ball <cjb@laptop.org>
Signed-off-by: Subhash Jadavani <subhashj@codeaurora.org>
This bug was introduced in the 'MMC-4.5 Power OFF Notify Rework' fix.
Prior to the aforementioned patch, during resume mmc_init_card was being
invoked. The aforesaid patch invokes mmc_card_awake, prior to which
mmc_power_up has already set the clock frequency to 400Khz. Since the card
init is not done again, this frequency stays as is and results in data
time-out errors.
Two new functions
* mmc_save_ios
* mmc_restore_ios
were added.
The mmc_save_ios is invoked during mmc_suspend process and it saves the
current ios values, while mmc_restore_ios is invoked during mmc_resume process
and restores the previous ios values before sending the awake command. This
ensures that the clock, timing, bus-width etc are set properly before any
request is sent to the driver.
Signed-off-by: Asutosh Das <asutoshd@codeaurora.org>
This is a rework of the existing POWER OFF NOTIFY patch. The current problem
with the patch comes from the ambiguity on the usage of POWER OFF NOTIFY
together with SLEEP and misunderstanding on the usage of MMC_POWER_OFF
power_mode from mmc_set_ios in different host controller drivers.
This new patch works around this problem by adding a new host CAP,
MMC_CAP2_POWER_OFF_VCCQ_DURING_SUSPEND, which when set sends a
POWER OFF NOTIFY from mmc_suspend instead of SLEEP. It is expected that host
controller drivers will set this CAP, if they switch off both Vcc and Vccq
from MMC_POWER_OFF condition within mmc_set_ios. However, note that there
is no harm in sending MMC_POWER_NOTIFY even if Vccq is not switched off.
This patch also sends POWER OFF NOTIFY from power management routines (e.g.
mmc_power_save_host, mmc_pm_notify/PM_SUSPEND_PREPARE, mmc_stop_host), which
does reinitialization of the eMMC on the return path of the power management
routines (e.g. mmc_power_restore_host, mmc_pm_notify/PM_POST_RESTORE,
mmc_start_host).
This patch sets POWER_OFF_NOTIFICATION to POWER_OFF_SHORT if it is sent from
the suspend sequence. If it is sent from shutdown sequence then it is set to
POWER_OFF_LONG.
Earlier implementation of PowerOff Notify as a core function is replaced as
a device's bus operation.
Signed-off-by: Saugata Das <saugata.das@linaro.org>
Signed-off-by: Girish K S <girish.shivananjappa@linaro.org>
changes in v5:
modified the the handling of return value in mmc_poweroff_notify.
changes in v4:
As suggested in review,
- Moved mmc_can_poweroff_notify to core.c
- Moved mmc_claim_host, mmc_release_host outside mmc_poweroff_notify
- Added check for wrong initialization for poweroff_notify_type
- mmc_poweroff_notify is modified to take as 2nd parameter
changes in v3:
This version addresses the review comments given by Subhash and Ulf
changes in v2:
This version addresses the changes suggested by Ulf
[smuckle@codeaurora.org: resolve minor merge conflicts]
Signed-off-by: Steve Muckle <smuckle@codeaurora.org>
The write packing statistics are used for the packed commands unit tests
in order to determine test success or failure
Change-Id: I1b330033e59a775c64fb915038d58615aff0dbdd
Signed-off-by: Maya Erez <merez@codeaurora.org>
The write packing control will ensure that read requests latency is
not increased due to long write packed commands.
The trigger for enabling the write packing is managing to pack several
write requests. The number of potential packed requests that will trigger
the packing can be configured via sysfs by writing the required value to:
/sys/block/<block_dev_name>/num_wr_reqs_to_start_packing.
The trigger for disabling the write packing is fetching a read request.
Change-Id: I982170fa6dca9150ea4310bb546b838b7fd30e9b
Signed-off-by: Maya Erez <merez@codeaurora.org>
This patch supports packed write command of eMMC4.5 device.
Several writes can be grouped in packed command and all data
of the individual commands can be sent in a single transfer
on the bus.
Change-Id: I391c3e5f73b785a8b7d25eb8256051020cfb0631
Signed-off-by: Seungwon Jeon <tgih.jun@samsung.com>
Signed-off-by: Maya Erez <merez@codeaurora.org>
Enable eMMC background operations (BKOPS) feature.
If URGENT_BKOPS is set after a response, note that BKOPS
are required. After all I/O requests are finished, run
BKOPS if required. Should read/write operations be requested
during BKOPS, first issue HPI to interrupt the ongoing BKOPS
and then service the request.
If BKOPS-STATUS is upper than LEVEL2, need to check until clear
the BKOPS-STATUS vaule.
If you want to enable this feature, set MMC_CAP2_BKOPS.
And if you want to set the BKOPS_EN bit in ext_csd register,
use the MMC_CAP2_INIT_BKOPS.
Future considerations
* Check BKOPS_LEVEL=1 and start BKOPS in a preventive manner.
* Interrupt ongoing BKOPS before powering off the card.
* How get BKOPS_STATUS value.(periodically send ext_csd command?)
Change-Id: Ia679c661a282072a7e54d10fc59d8ec1cbecae96
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Konstantin Dorfman <kdorfman@codeaurora.org>
This feature delete the unmap memory region of the eMMC card,
by writing to a specific register in the EXT_CSD
unmap region is the memory region that were previously deleted
(by erase, trim or discard operation)
Change-Id: I7f1df8e87fb782979fd90e064eca00704caca54b
Signed-off-by: Yaniv Gardi <ygardi@codeaurora.org>
Signed-off-by: Maya Erez <merez@codeaurora.org>
This patch adds packed command feature of eMMC4.5.
The maximum number for packing read(or write) is offered
and exception event relevant to packed command which is
used for error handling is enabled. If host wants to use
this feature, MMC_CAP2_PACKED_CMD should be set.
Change-Id: I8013970fc9d54da7d92b0aca2bb0746189b9825b
Signed-off-by: Seungwon Jeon <tgih.jun@samsung.com>
Signed-off-by: Maya Erez <merez@codeaurora.org>
mmcq performance numbers are not captured since asynchronous
MMC request support got added in MMC block driver. So printing
out these numbers (which are all zeros) just adds confusion.
This patch removes the printing of mmcq performance numbers
statistics.
CRs-Fixed: 364206
Change-Id: I7213b11c8e9e055894c9902af7e975de3be1c519
Signed-off-by: Subhash Jadavani <subhashj@codeaurora.org>
Commit 06e8935feb ("optimized SDIO IRQ handling for single irq")
introduced some spurious calls to SDIO function interrupt handlers,
such as when the SDIO IRQ thread is started, or the safety check
performed upon a system resume. Let's add a flag to perform the
optimization only when a real interrupt is signaled by the host
driver and we know there is no point confirming it.
Change-Id: Ibfd6b35589b15fabea7b1c18dfa2197a78866b61
Reported-by: Sujit Reddy Thumma <sthumma@codeaurora.org>
Signed-off-by: Nicolas Pitre <nico@linaro.org>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Chris Ball <cjb@laptop.org>
Signed-off-by: Sujit Reddy Thumma <sthumma@codeaurora.org>
Some INAND MCP devices advertise incorrect data timeout values.
This leads to data timeout errors on the platform. So, add a quirk
for such devices to facilitate proper functionality.
CRs-Fixed: 355347
Change-Id: If4fdd2724dc407450da8529222efca7ee94f50df
Signed-off-by: Pratibhasagar V <pratibha@codeaurora.org>
Currently performance numbers are captured for each SDCC
transfers unconditionally which may add the overhead and
could reduce the SDCC read/write throughput numbers.
This change adds additional control for enabling/disabling the
capturing of performance numbers at runtime. We already have sysfs
entry named "perf" for msm sdcc devices. Currently setting this
entry to 0 clears the performance statistics. But now we are
changing the definition of this entry as mentioned below:
Disable performance capturing and clear the performance statistics:
"echo 0 > /sys/devices/platform/msm_sdcc.<n>/perf"
Enable performance capturing:
"echo 1 > /sys/devices/platform/msm_sdcc.<n>/perf"
CRs-fixed: 345170
Change-Id: I3ab9288fd87cc8a8ada6c0c3d066cac4f68d79b7
Signed-off-by: Subhash Jadavani <subhashj@codeaurora.org>
mmc_set_ios() is used by host drivers during suspend/resume
routines in indirect way i.e., by calling host->ops->set_ios().
But now with MMC_CLKGATE enabled, mmc_set_ios() also updates
host->clk_gated flag. So export this API so that host controller
drivers can use it.
Change-Id: Ib0c177635bb8d87ba68c98e08b8d940c73f2b80c
Signed-off-by: Sujit Reddy Thumma <sthumma@codeaurora.org>
MMC core reads SEC_COUNT information from EXT_CSD register and assumes
that the card supports sector access mode. Some eMMC cards (<=2GB) do not
support this mode even though they have SEC_COUNT value defined, causing
failure while populating extended partitions. Sector/Byte access mode
information is stored in OCR register. Hence, read OCR bit 30 and then
confirm it with SEC_COUNT value to know whether the card supports sector
access mode or byte access mode.
Change-Id: Ifdfff35309e8667cd2c2ac2761b9a708d5b785d3
Signed-off-by: Sujith Reddy Thumma <sthumma@codeaurora.org>
There is a possible race with mmc_claim_host() in mmc_sd_suspend()/
mmc_suspend() and mmc_claim_host() in mmc_blk_issue_rq() when runtime
pm is enabled. Fix this by blocking processing of requests until the
previous runtime suspend is processed and then resume as part of
msmsdcc_enable(). Previous fix has card detection failure as a side effect
during resume.
Change-Id: I9cb31269638d9db4e630eb22b973a5335af1bda4
Signed-off-by: Sujith Reddy Thumma <sthumma@codeaurora.org>
[sboyd: Dropped msm driver change]
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Profiling code is added to measure read, write times for
the MMC requests at various MMC layers. Profiling is done
at the MMC queue and at the driver level. This information
can be viewed through a sysfs entry called perf.
Change-Id: I7c65bfe25a1f7774e3a9abf1f9539e690b3718ec
Signed-off-by: Aparna Mallavarapu <aparnam@qualcomm.com>
There is no need to take a wakelock for delayed lazy disable
work, it will be cancelled in the suspend handler and force
disabled. Only take the wakelock when the detect work is
queued, and make sure to drop the wakelock if the work is
cancelled.
Change-Id: I1e507a5f98848954ea21d45e23b6192c3132a349
Signed-off-by: Colin Cross <ccross@android.com>
A card driver can now specify that the underlying bus should *not*
auto-resume with the rest of the system. This is useful for reducing resume
latency as well as saving power when the card driver is not using the
bus. In the future, we'll add support for manual suspend
Signed-off-by: San Mehat <san@google.com>
This is required to support chips which use SDIO for signaling/
communication but do not implement the various card enumeration registers
as required for full SD / SDIO cards.
mmc: sdio: Fix bug where we're freeing the CIS tables we never allocated when using EMBEDDED_SDIO
mmc: Add max_blksize to embedded SDIO data
Signed-off-by: San Mehat <san@google.com>
Pull MMC updates from Chris Ball:
Core:
* Support for MMC 4.5 Data Tag feature -- we tag REQ_META, so devices
that support Data Tag will provide increased throughput for metadata.
* Faster detection of card removal on I/O errors.
Drivers:
* dw_mmc now supports eMMC Power Off Notify, has PCI support, and
implements pre_req and post_req for asynchronous requests.
* omap_hsmmc now supports device tree.
* esdhc now has power management support.
* sdhci-tegra now supports Tegra30 devices.
* sdhci-spear now supports hibernation.
* tmio_mmc now supports using a GPIO for card detection.
* Intel PCH now supports 8-bit bus transfers.
* tag 'mmc-merge-for-3.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: (53 commits)
mmc: sh_mmcif: simplify bitmask macros
mmc: sh_mobile_sdhi: support modular mmc-core with non-standard hotplug
mmc: sh_mobile_sdhi: add a callback for board specific init code
mmc: tmio: cosmetic: prettify the tmio_mmc_set_ios() function
mmc: sh_mobile_sdhi: do not manage PM clocks manually
mmc: tmio_mmc: remove unused sdio_irq_enabled flag
mmc: tmio_mmc: power status flag doesn't have to be exposed in platform data
mmc: sh_mobile_sdhi: pass card hotplug GPIO number to TMIO MMC
mmc: tmio_mmc: support the generic MMC GPIO card hotplug helper
mmc: tmio: calculate the native hotplug condition only once
mmc: simplify mmc_cd_gpio_request() by removing two parameters
mmc: sdhci-pci: allow 8-bit bus width for Intel PCH
mmc: sdhci: check interrupt flags in ISR again
mmc: sdhci-pci: Add MSI support
mmc: core: warn when card doesn't support HPI
mmc: davinci: Poll status for small size transfers
mmc: davinci: Eliminate spurious interrupts
mmc: omap_hsmmc: Avoid a regulator voltage change with dt
mmc: omap_hsmmc: Convert hsmmc driver to use device tree
mmc: sdhci-pci: add SDHCI_QUIRK2_HOST_OFF_CARD_ON for Medfield SDIO
...
