Revert the following customer changes in order to clean up this
branch.
This reverts commit 33ddf5a9eaa031c00b00846458f2ba534e6807b8.
This reverts commit f17df2402b795faf2c03de6d8a5b12378674f3be.
This reverts commit 0a488464c03806e1f775c35d7b2c83650eaab4ef.
This reverts commit 23d2a7cd02b081e1cf2578c02b7ecd3a65319d4e.
This reverts commit 90e32fa7cb701d922825e40b82b566e4af843ea2.
This reverts commit 7346d0fbd3c338d55330766e0f1867f19b364fed.
This reverts commit eb59bf66db9f2ca6e79552f4f72aa56f8c6abd27.
This reverts commit 9c56de000bb2390191fa2ddaea738e6d3e8f5d4f.
This reverts commit 7a72ca62c3f64c7b914edd8d9dbb75933b3c845e.
This reverts commit 76048dac5085eca4459ee5ea5dd4876a1f518cfa.
This reverts commit bfafe7ec7cdeef5b44b32f9aa6ee03beba2020e0.
This reverts commit e346f7a7b8ead1bbb106f4eb1e766c49407bffde.
This reverts commit 1265899c012a463cb0521ed73f2abe057692a9db
This reverts commit 1ff608a341b87defa586ca4a24d0bd89abfdfbb3
This reverts commit 5f030effc8c1af159ad13e77d4c169f037d6c9e4.
This reverts commit 19c87ddde66fd6aad61a60e466a75af235fca7f9.
This reverts commit 905eac978c30c96c5d12a81c1f6968d8c57a645f.
This reverts commit 1bd7c8643cdd8fdc7cf649ec465cc454315a6753.
This reverts commit 69f1730e0d249bad3b4f0fc0f94d917c16c3df19.
This reverts commit 2073afb7ee8b3f80f1f3184bd7ac99ead581adee
This reverts commit 8126554cf049d13f4dd2d815d86ea289efdc6f3a.
This reverts commit 45ccbb53cfc227fd3811e71b0bd813432c96ee9e
This reverts commit 325995993eb806285a35381e803ed5432fe5a93a.
This reverts commit 84cf5a3959bcf412c4b48f8a29b8255c18602d1b.
This reverts commit 839d5a50c761787ded6b8558fa37696be81196fe.
This reverts commit d4b1fb57463d04aeca5ae9bfd2181faa016f97c2.
This reverts commit 2ab04b0deb912a5a52899a50ced73e36974a6a00.
This reverts commit 3a3de0ee621625c8767e0d3c7106c52fcf834499.
This reverts commit f278add027723a90b11c9a97f6d1b09c1aaec795.
This reverts commit 1a749b700752efcc8d832f7b83554df2771dce53.
Change-Id: I21863586360b6bc57dd6d631c34725bea963cffa
Signed-off-by: Xiaozhe Shi <xiaozhes@codeaurora.org>
Since WLC(wireless charger) supply power to battery without PM8921 charger,
the SoC value is not accurate. This patch adjust OCV(open circuit voltage)
and max CV(constant voltage) value to compensate difference between
WLC and pm8921-charger.
Change-Id: I8fa368f706866d93451c2f663da69c010f9b2a35
This is expected to prevent missing wireless charger state.
The bms needs to know if anything is connected to the wireless charging.
Change-Id: Ie97130cc515d19ab17b67267d9aca7588c1fff72
LTC4088 is high efficiency USB powerpath controller
and Li-Ion/Polymer battery charger. This driver
enables the charger, allows to set current limits,
and detection.
Change-Id: I844431210cfd6e71d02fa7ffb730ee56d8417273
Signed-off-by: Jay Chokshi <jchokshi@codeaurora.org>
Add power on reset (POR) init procedure defined by the maxim
appnote. Using this procedure ensures that the part is
configured/initialized correctly at POR and improves early accuracy of
the fuel gauge and informs the fuel gauge with the battery
characterization parameters. The battery characterization parameters
come from the maxim characterization procedure.
Signed-off-by: Ramakrishna Pallala <ramakrishna.pallala@intel.com>
Signed-off-by: Dirk Brandewie <dirk.brandewie@gmail.com>
Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
align the register names with max17042 data sheet removing
registers that are marked reserved that are not used.
Add register definitions defined in the maxim initialization appnote
Signed-off-by: Dirk Brandewie <dirk.brandewie@gmail.com>
Acked-by: MyungJoo Ham <myungjoo.ham@samsung.com>
Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
Now that this driver is named more generally, this change updates
the internal variables, defines and functions to use this new name.
Signed-off-by: Rhyland Klein <rklein@nvidia.com>
Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
This driver for the bq20z75 implemented the register spec defined
by the SBS standard. As this is not unique to this the TI part this
was originally written for, we can generalize this driver to
show its support for any SBS compliant battery.
Signed-off-by: Rhyland Klein <rklein@nvidia.com>
Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
Because battery health monitoring should be done even when suspended,
it needs to wake up and suspend periodically. Thus, userspace battery
monitoring may incur too much overhead; every device and task is woken
up periodically. Charger Manager uses suspend-again to provide
in-suspend monitoring.
This patch allows to monitor battery health in-suspend state.
Signed-off-by: Donggeun Kim <dg77.kim@samsung.com>
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
This patch supports additional properties (PRESENT, CYCLE_COUNT,
VOLTAGE_MAX, VOLTAGE_MIN_DESIGN, CURRENT_NOW, CURRENT_AVG,
CHARGE_FULL, and TEMP).
Plus, initialization code for registers is added.
Signed-off-by: Donggeun Kim <dg77.kim@samsung.com>
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
Signed-off-by: KyungMin Park <kyungmin.park@samsung.com>
Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
Adding support for external power change notification. One problem found
is that there is a lag time before the sensor will return a new status.
To ensure that we only fire off the power_supply_changed event when the
status returned from the sensor is actually different, we delay sending
the the notification, and instead poll on it looking for a change. The
amount of time to poll is configurable via platform data.
Signed-off-by: Rhyland Klein <rklein@nvidia.com>
Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
The ISP1704/1707 chip can be put to full power down
state by asserting the CHIP_SEL line. This patch enables
platform or board specific hooks to put the device into
power down mode in case not needed.
This patch is a preparation for enabling this powering
routine in n900 (rx-51) devices.
Thanks to Heikki Krogerus for helping out with the patch.
Signed-off-by: Kalle Jokiniemi <kalle.jokiniemi@nokia.com>
Acked-By: Heikki Krogerus <heikki.krogerus@nokia.com>
Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
MAX8903 is an integrated battery charger and selector with two
power inputs (USB and AC adapter). This driver enables the charger,
handles interrupts, and provides power-supply-class information to
userland.
Tested on Exynos4 NURI / S5PC210 SLP7 boards.
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
With the support of platform data, now adding support for option i2c
retries on read/write failures. Ths is specified through the optional
platform data.
Signed-off-by: Rhyland Klein <rklein@nvidia.com>
Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
Adding support for an optional gpio for battery detection. This is
passed in through the i2c platform data. It also accepts another
field, battery_detect_present to signify the gpio state which means
the battery is present, either 0 (low) or 1 (high).
Signed-off-by: Rhyland Klein <rklein@nvidia.com>
Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
This patch adds support for the bq27000 battery to the bq27x00 driver.
The bq27000 is similar to the bq27200 except that it uses the HDQ bus
instead of I2C to communicate with the host system.
The driver is implemented as a platform driver. The driver expects to be
provided with a read callback function through its platform data. The read
function is assumed to do the lowlevel HDQ handling and read out the value
of a certain register.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Tested-by: Grazvydas Ignotas <notasas@gmail.com>
The MAX17042 is a fuel gauge with an I2C interface for lithium-ion
betteries. Unlike its predecessor MAX17040, MAX17042 uses 16bit
registers. Besides, MAX17042 has much more features than MAX17040; e.g.,
a thermistor, current and current accumulation measurement, battery
internal resistance estimate, average values of measurement, and others.
This patch implements a driver for MAX17042.
In this initial release, we have implemented the most basic features of
a fuel gauge: measure the battery capacity and voltage.
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
This patch adds a simple driver for chargers indicating their online
status through a GPIO pin.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
