After upgrading to kernel 3.4, there is 5 second delay
at the closing of PCM playback. The delay is due to missing
EOS from QDSP6 audio session manager causing pcm close function
of PCM platform driver to wait for 5 seconds. The root cause
for missing EOS is that ALSA dynmic PCM shutdown sequence has
changed. Now, trigger stop is called on the back-end DAI-LINK.
Furthermore, back-end trigger stop is called before front-end
trigger stop. Since sink stops rendering data, data at source
will never get consumed. EOS event will not arrive. As trigger
operation has to be atomic, it is very difficult to guarantee
sequence on shutting down various modules in QDSP6. The decision
is to abandon starting and stopping QDSP6 AFE port in trigger
function. This decision is considered acceptable as playback
and capture over SLIMBUS is no longer subject to strict sequence
which Q6 AFE port must be started after CODEC configuration.
Change-Id: Ief351168b08d5cca0a76405834cf3d6aa14a3941
Signed-off-by: Phani Kumar Uppalapati <phanik@codeaurora.org>
Starting with B family chips, the IOMMU client is responsible
for registering a domain (page table) and attaching it with
the corresponding device context when required.
Signed-off-by: Ankit Premrajka <ankitp@codeaurora.org>
Conflicts:
include/media/videobuf2-msm-mem.h
Change-Id: I2105f3cdd94a5e42c09a46e32ed615a35615485d
Signed-off-by: Sudhir Sharma <sudsha@codeaurora.org>
Starting with B family chips, the IOMMU client is responsible
for registering a domain (page table) and attaching it with
the corresponding device context when required.
Signed-off-by: Ankit Premrajka <ankitp@codeaurora.org>
Conflicts:
include/media/videobuf2-msm-mem.h
Change-Id: I98f97805a67d597da55780f8c6739c9734a19a14
Signed-off-by: Sudhir Sharma <sudsha@codeaurora.org>
The version of packing support excepted by the linux community is
slightly different from the one that was merged. This revert is needed
in order to upload the latest version from the linux community.
This patch reverts the following commits:
1.mmc: card: Add eMMC4.5 write packed commands unit-tests
2.mmc: card: Fix packing control enabling algorithm
3.mmc: block: Add MMC write packing statistics
4.mmc: msm_sdcc: enable the write packing control
5.mmc: msm_sdcc: Enable write packing capability
6.mmc: block: Add write packing control
7.mmc: core: Support packed write command for eMMC4.5 device
8.mmc: core: Add packed command feature of eMMC4.5
(cherry picked from commit f94cf3da103b344b13fa4d6665fd21dad1b95ead)
Change-Id: I2efc6dc8d8f6d5cc7e9efa99ec74914ffff96fcd
commit: 9b54d88c6a11ebfe069b7fdebcb521da21754c3f
commit: e2ecb58a6c5011549aac3e86fb1c13e7b7c65104
commit: e544d700e2dac1584a8172c4dc347d81ede203bd
commit: 8afe8d2a98a1bbf3804162ff5c95a56226935f5a
commit: 25e2261a556c4393f79d58bce814bb3df34b9549
commit: 63c61d6d8b8f37c71b4162b3affffdf72ac06811
commit: 968c774ea6466fa7adbf2eac333220132acda306
commit: 516994eee39282b8648b509e449ff83b49833209.
Signed-off-by: Tatyana Brokhman <tlinder@codeaurora.org>
(cherry picked from commit 31fe84d6edae65f9df5663538e528697897be86e)
Signed-off-by: Maya Erez <merez@codeaurora.org>
If the card and the host support BKOPS, and BKOPS is not enabled
yet, set the BKOPS_EN bit to enable BKOPS.
This bit is one time programmable.
(cherry picked from commit e966c1ca32d118b26ca6e26267f0c13c9c0e0052)
Change-Id: I2b97898857bed676021fe56a6f6e49762cf609fa
Signed-off-by: Maya Erez <merez@codeaurora.org>
(cherry picked from commit 5ebe331e59e9c30bffead8e3030e3581ee699895)
Enable eMMC background operations (BKOPS) feature.
If URGENT_BKOPS is set after a response, note that BKOPS are required.
Immediately run BKOPS if required. Read/write operations should be
requested during BKOPS(LEVEL-1), then issue HPI to interrupt the
ongoing BKOPS and service the foreground operation.
(This patch only controls the LEVEL2/3.)
When repeating the writing 1GB data, at a certain time, performance is
decreased. At that time, card triggers the Level-3 or Level-2. After
running bkops, performance is recovered.
Future considerations:
* Check BKOPS_LEVEL=1 and start BKOPS in a preventive manner.
* Interrupt ongoing BKOPS before powering off the card.
* How do we get BKOPS_STATUS value (periodically send ext_csd command)?
* If using periodic bkops, also consider runtime_pm control.
(cherry picked from commit 6807769f7bf68984a5aeda4b9b521f1167cbaf00)
[merez@codeaurora.org: core.c: release_host when stopping BKOPs for
non SDIO cards in suspend]
(cherry picked from commit c1a56a1247341d13af7c8f84d5ac1211a3c4b376)
Change-Id: I5ac2ac909222e2b4e94cd97ce7da79f4488f06f0
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Konstantin Dorfman <kdorfman@codeaurora.org>
Reviewed-by: Maya Erez <merez@codeaurora.org>
Signed-off-by: Chris Ball <cjb@laptop.org>
Signed-off-by: Maya Erez <merez@codeaurora.org>
(cherry picked from commit 653abe2434532e4d2886d27dfdc3f42ae1c7ade1)
A newer version of BKOps should be picked from the community.
Therefore the old support is reverted.
Revert the following commits:
9db69fca22bd2970f6b14b50cf8533a1edb64364
8ac659eb3d96e31b8bb6b8d09143ddd6eb83ae19
f886c80ee2f4c29aeaab2d76c9303c00263bb428
(cherry picked from commit 3402d2b725a5af16bc62a2e788913a46d3f7e54a)
Change-Id: I5df105753bef7ee10215526006187673b85bb0c1
Signed-off-by: Maya Erez <merez@codeaurora.org>
(cherry picked from commit b5763af04035cd5e3264225f40270d175985adc5)
This reverts commit 304d9f5172c8c0210e2e29b175e8f68ea8257f69.
low power mode changes are causing issues like,delay in reponse to
touch , and controller is not recognizing the touch events as its
scan rate is also low in low power mode state . since controller is
not recognizing the touch in low power mode state , so only way
for the controller to come out of low power mode is to do multi-touch
and controller responds randomly to one of the touches and comes out
of the low power mode.
Signed-off-by: Sreenivasulu Chalam Charla <sreeniva@codeaurora.org>
Change-Id: I35e0797f819cfbce6630d70af443b96546eacfb5
Signed-off-by: Neha Pandey <nehap@codeaurora.org>
Check for for wcd9xx read error properly during probe.
Move the determination of codec type to function and
check for interface error during read operation for
I2C. Since slimbus master is changed the slim porbe
may be called later to I2C probe. Handle proper
releasing of reset gpio in case there was error
for I2C read.
Change-Id: I6e8e271861e5bf7fee5df63b5ac265b7976f83d2
Signed-off-by: Venkat Sudhir <vsudhir@codeaurora.org>
Some hardware platforms can supply VPH_PWR without battery
or charger being present.
To avoid shutting down due to no connected power sources
from the perspective of software set a flag that forces
the DC supply to be online for this type of platform.
Signed-off-by: David Keitel <dkeitel@codeaurora.org>
(cherry picked from commit a3cf943ef8c91435e2cb94b8e8bcc482dc65cb27)
Conflicts:
drivers/power/pm8921-charger.c
Change-Id: I565edb1ab797384481ce5e37aee73ee0a8e80428
Signed-off-by: Sudhir Sharma <sudsha@codeaurora.org>
The battery alarm module provides interrupts when the battery
falls below or rises above a programmed threshold. This feature
is useful to wakeup the device when the battery is in low voltage
situations.
(cherry picked from commit 6d538144cb02933cf27f425ad721541d80377b43)
Change-Id: I5d17bacf363cab165156b62730ccf9c23c633b3c
CRs-Fixed: 372690
Signed-off-by: Abhijeet Dharmapurikar <adharmap@codeaurora.org>
(cherry picked from commit 16f56979ee6876ce64f6dba8928a782825ff1275)
Export a function from sch_api.c that will look up
desired qdisc and call it's registered change function
to enable/disable flow.
Change-Id: I5b6dc7a6fd2b09b796c92b3770ba83423d19c864
CRs-Fixed: 355156
Acked-by: Jimi Shah <jimis@qualcomm.com>
Signed-off-by: Tianyi Gou <tgou@codeaurora.org>
(cherry picked from commit b8419fe690053b76658d49565c57ac654faf2eaa)
(cherry picked from commit 3a30e7aa4487f56a74f12c12f11cece6ce1f2100)
This ioctl provides a shorter route to enable/disable flow
on a given qdisc when compared to the traditional NETLINK
based communication. It is known to improve throughput when
data flow is throttled at a higher rate.
Change-Id: I8533887c8a7caffe3b17320dc044f28388ba8b83
CRs-Fixed: 355156
Acked-by: Jimi Shah <jimis@qualcomm.com>
Signed-off-by: Tianyi Gou <tgou@codeaurora.org>
(cherry picked from commit 747a936d6fd1d49331b0891df6797144eec56e23)
(cherry picked from commit cfa440e0faf9b6cd8bc313c750fd0713490f3d94)
Parse the device tree elements and fill platform
data structure.
Signed-off-by: Mohan Pallaka <mpallaka@codeaurora.org>
(cherry picked from commit d96f5032cd8b73450886262fe193d1531038c0f0)
Conflicts:
drivers/input/touchscreen/atmel_mxt_ts.c
Change-Id: I551dadffaa84c991abbe964bfb9f72b7fd11dfee
Signed-off-by: Sudhir Sharma <sudsha@codeaurora.org>
(cherry picked from commit 368b8d73bbda62f6ab217ef06019b685636fc3ba)
It is sometimes useful to profile how long CPU frequency switches
take, since they often involve variable overhead (PLL lock times,
voltage increase time, etc.). Add additional traces to to make this
possible.
Since the overhead involved may differ based on the frequencies
being switched between, record both the start and the end frequencies
as part of the trace.
Change-Id: I2de743fc357dad3590fd4980f65f38f6073d426e
Signed-off-by: Matt Wagantall <mattw@codeaurora.org>
(cherry picked from commit 0fe22de09613ce497561f51151b2c50b6c4a1c3e)
(cherry picked from commit 9ab0adbcac4df4d681617a8368329d2f4cad4171)
Add support to create connection to LE devices using
whitelist. With this, the Controller can try to connect
to multiple devices at the same time. The following
interfaces are added.
1. Add/Remove device from whitelist
2. Clear all the devices from whitelist
3. Create Connection to devices from whitelist
4. Cancel create connection to whitelist devices
CRs-fixed: 388980
Change-Id: I3900c71255e754f80bb2873ae19a41b94cca76c3
Signed-off-by: Sunny Kapdi <sunnyk@codeaurora.org>
(cherry picked from commit 93bef895b01b79f49af60ba1394c9c3f6e563212)
(cherry picked from commit 377ee2bf1fc37bcbeae872661646bdd6a5f8da31)
Send device disconnection reason to bluez on receiving the
diconnection complete event so that low energy profiles
such as proximity can decide to reconnect if the reason
is link loss.
CRs-Fixed: 378240
Signed-off-by: Archana Ramachandran <archanar@codeaurora.org>
(cherry picked from commit da09d26a75ee1c7c1911dcfbe0128fd09f6631f4)
Change-Id: Iab1fede47f44342d87be6c3c5aa7590754fd950c
Signed-off-by: Sudhir Sharma <sudsha@codeaurora.org>
The demux is an in-kernel software component whose purpose is to take
an incoming TSIF stream and split it into multiple output channels
based on the PID field in each TS packet. Each output channel can be
used for a different purpose, such as audio, video or channel
information. In order to get good performance when moving such large
data streams around, the demux was placed in kernel-space as to
prevent copying memory buffers between kernel-space and user-space, at
least at this early stage in processing the traffic. Originally the
design of the TSPP driver was based on the earlier TSIF driver, so it
contained only a user-space API.
Signed-off-by: Joel Nider <jnider@codeaurora.org>
(cherry picked from commit 435ad8e2157eec5783a435f1e7ec47f67d759882)
Change-Id: I0dadf04ec2694c82fc8378fbed5fbf81fc889337
Signed-off-by: Sudhir Sharma <sudsha@codeaurora.org>
- Pass number of ps string instead of ps length
- Use proper name for radio text length
CRs-Fixed: 388115
Signed-off-by: Ayaz Ahmad <aahmad@codeaurora.org>
(cherry picked from commit 1c0db5273216ea80f3762dc5675daebac16e1e0b)
Signed-off-by: Sudhir Sharma <sudsha@codeaurora.org>
(cherry picked from commit d327e591c875450aa8ff157645974aa3fb7c0cc3)
Change-Id: I501af5c175c07f84dc117fc5e8ac410cecc8c35d
Signed-off-by: Sudhir Sharma <sudsha@codeaurora.org>
Content adaptive backlight control (CABC) support is needed to
control backlight by external PWM. It can be enabled by setting
"cabc_en = true" in the platform data wled_cfg structure.
CRs-fixed: 379347
Signed-off-by: Amy Maloche <amaloche@codeaurora.org>
(cherry picked from commit c366d5bfc380183e1c4f9877b2c8558098bd4281)
Change-Id: Iae7940d25d8754ab539d5ce1fa3f78972b5222d1
Signed-off-by: Sudhir Sharma <sudsha@codeaurora.org>
Enabling this feature will allow the use of
PF_WAKE_ON_IDLE, a per task flag that causes that task,
or tasks woken by that task, to wake on an idle CPU if
there is one available. Note that due to the PF_WAKE_ON_IDLE
feature this will not cause a change in behavior for tasks
that do not have the PF_WAKE_ON_IDLE flag set.
Signed-off-by: Steve Muckle <smuckle@codeaurora.org>
(cherry picked from commit dc6384ce8b9185fc354df3c5622a463da0b60044)
Change-Id: I25963ef54ac3b8f863e2787901f3acb6e4cd2c0d
Signed-off-by: Sudhir Sharma <sudsha@codeaurora.org>
Adds support for codec config flag to be passed
to driver. This flag indicates that the buffer
associated contains codec specific data.
Signed-off-by: Praneeth Paladugu <ppaladug@codeaurora.org>
(cherry picked from commit f4bd6a3fbdb5d70b7000cdceb811557876bb7953)
Change-Id: Ib832872717adbc46bd186aa268eaa9cfa402313b
Signed-off-by: Sudhir Sharma <sudsha@codeaurora.org>
Define logical id for display backend processing.
These ids are independent with hw implementation, could be used
for MDP4, MDP5 and future ASICs. Kernel driver implementation will
also be abstracted to the post processing user.
Signed-off-by: Ken Zhang <kenz@codeaurora.org>
(cherry picked from commit 6a431631728d2d217447079dd636bd1e26d56ac4)
Change-Id: I27bd4e7d3803f4b356d924c65ac28e142375d1d5
Signed-off-by: Sudhir Sharma <sudsha@codeaurora.org>
This function is exported in blk-core.c to be used in other modules
but it's definition in h file is missing.
Signed-off-by: Tatyana Brokhman <tlinder@codeaurora.org>
(cherry picked from commit 87c7500d26ddddf2851bbe65190f5d8970b0346d)
Change-Id: I94a1603c345db9a92237ff6696bf29e6afbe69b7
Signed-off-by: Sudhir Sharma <sudsha@codeaurora.org>
VADC/IADC peripheral is supported from PMIC 2.0 onwards.
Add version check to allow VADC/IADC reads if the
version is supported. Add probe defereal api for clients
who need to know if the ADC driver is ready. There is a
bug where the completion is not initialized. Fix it
by initializing it. Add support to disable the peripheral
after the ADC is read and enable it before starting a
conversion.
Add scaling functions to support reading the die temperature,
XO_THERM, batt_therm and batt_id. Add the ratiometric
calibration routine that uses the vref/gnd for calibration.
The ratiometric calibration is used for calibrating xo_therm,
batt_therm, batt_id.
Update the gain value used for calibration on the IADC
peripheral. PMIC 2.0 IADC peripheral uses 17.857mV instead
of 25mV for its gain calibration.
Signed-off-by: Siddartha Mohanadoss <smohanad@codeaurora.org>
(cherry picked from commit 5ace110e2165fba66227e18154d58b0e6cbb24b2)
Change-Id: I37b02de53ea2bed913c30261624c31a1ae57131c
Signed-off-by: Sudhir Sharma <sudsha@codeaurora.org>
Add support for communicating with the PSOC
using the supported protocol commands from
the PSOC.
The support includes communicating with the
controller to initiate and start the ADC
conversion for the selected channels. Start
and receive ADC conversion for single measurement,
buffered reads, averaging the samples and returning
the results over the set averaging period.
Other commands supported include setting/receiving
the timestamp, setting reference voltage, toggling
gpio to set triggers on set events.
Signed-off-by: Siddartha Mohanadoss <smohanad@codeaurora.org>
(cherry picked from commit efddea4639f2953375fb822524fcae756ae67dc0)
Change-Id: Id519a5b9033b85953f1d6229a144f9df78910900
Signed-off-by: Sudhir Sharma <sudsha@codeaurora.org>
Found in a rare case there is possibility that remote device
sent disconnect on a connection and DUT is trying send data
on the same. In that case accessing some released wakelock
is causing issue. The current changes are to use locking
mechanism to validate the connection before acting on the
wake lock.
CRs-Fixed: 394651
Change-Id: I6a4188a7d0d05a8cfbe66d3680473d549157917a
Signed-off-by: Srinivas Krovvidi <skrovvid@codeaurora.org>
(cherry picked from commit 6aadc41fcbd28dc3899a4b5d098e5f316588a029)
Signed-off-by: Sudhir Sharma <sudsha@codeaurora.org>
This change addresses following enhancements to debug
logging:-
1) Add data payload logging which is not currently
supported. This helps to sniff first 32 bytes of data
being sent and received. Data payload logging is
enabled by default. To disable data payload logging:-
echo 0 > /sys/module/ehci_hcd/parameters/enable_payload_log
2) Current urb submission event logging does not cover
root hub submissions, hence move urb submission logging
to hcd driver.
3) Current urb submission event logging does not return
the correct status if submission fails. Hence log the
return status of urb submission.
CRs-Fixed: 393294
Change-Id: Ic7e555e1545ec7d7b0e4042cd35235e0af26fb01
Signed-off-by: Hemant Kumar <hemantk@codeaurora.org>
(cherry picked from commit 4d50a43dce8645955d8ed739d7a183e62922c721)
Signed-off-by: Sudhir Sharma <sudsha@codeaurora.org>
HSIC controller should send SOF with in 3 msec after completing
the resume signal. If processor is in idle sleep state, the timer
interrupt generated by HSIC controller to indicate resume completion
gets delayed. If the interrupt handler is not run with in 3msec
after resume, the resume sequence is repeated. Disallow processor
idle sleep to avoid multiple resume cycles.
CRs-Fixed: 397154
Change-Id: Ibc8965ad8bcd94e0b1b1d39b5b2ad8f39cf51095
Signed-off-by: Pavankumar Kondeti <pkondeti@codeaurora.org>
(cherry picked from commit 4f5dc3be7b2b9939bc7a1b9526ccb70d93b53361)
Signed-off-by: Sudhir Sharma <sudsha@codeaurora.org>
- Sometimes user data getting corrupted and it is not available
at the kernel level
- Use the kernel buffer instead of user space buffer to copy
the data from fifo.
- Increase the STD_BUF_SIZE buffer size from 64 to 128 bytes to compatible
with Frameworks buffer size
Change-Id: I1e0fd8e59b218e7bec7820b0c27e2405d472cd56
Signed-off-by: Venkateshwarlu Domakonda <Venkateshwarlu@codeaurora.org>
(cherry picked from commit 7f095c44d4f63b168820aeba9d72b2504a879ab9)
Signed-off-by: Sudhir Sharma <sudsha@codeaurora.org>
Some buses would like to keep their devices in suspend state during system
resume. For example HSIC controller driver prevent system suspend when
HSIC device is active. If this device is resumed, during system resume
HSIC controller acquire wake lock and prevent the subsequent suspend till
HSIC device is auto suspended.
CRs-Fixed: 403975
Signed-off-by: Pavankumar Kondeti <pkondeti@codeaurora.org>
(cherry picked from commit 6f199aa800253a69e5679d1057823039f1bd65c9)
Change-Id: Ic8ab631ec1f15685cc35823aa7c57d699738d5fc
Signed-off-by: Sudhir Sharma <sudsha@codeaurora.org>
ALSA sound jack currently only supports upto 6 key events on a single
jack. Extend sound jack to support upto 8 buttons
CRs-fixed: 390846
Signed-off-by: Bhalchandra Gajare <gajare@codeaurora.org>
(cherry picked from commit 33cca1e3db8b961f898daa776b99621def9219d6)
(cherry picked from commit c012ad9fb0a819842ecd7ff672c19bbe17bf2f82)
Change-Id: I33a46404b67b83721afde56b45defb40b529391a
Signed-off-by: Sudhir Sharma <sudsha@codeaurora.org>
For compressed AC3 and DTS in HDMI Input use case, new read
compressed interface is added. The opcode changed in the release
builds. Hence, update the opcode for the same.
Signed-off-by: Subhash Chandra Bose Naripeddy <snariped@codeaurora.org>
(cherry picked from commit 9b2180d23ea2e9a22f66f4358f26a282165fea29)
(cherry picked from commit 4787039a3acadacf384a919c4c5f5b8f4d586b05)
Change-Id: I69cc1675405665b5432f75102678fafd0d90c344
Signed-off-by: Sudhir Sharma <sudsha@codeaurora.org>
All msm_ion clients need to use <linux/msm_ion.h> instead of
<linux/ion.h>
Signed-off-by: Mitchel Humpherys <mitchelh@codeaurora.org>
(cherry picked from commit 71a6ac9d4fc5e88efd57c2077caaff34afa36603)
(cherry picked from commit 353fac8a22a0253e990c745232d45586adb0defb)
Change-Id: I26165047d3361802ff3957b54a645544a8e9c3b5
Signed-off-by: Sudhir Sharma <sudsha@codeaurora.org>
Data contact detection (DCD) involves applying small amount of current on
D+ and waiting for it to go low. The D+ is pulled to low when the data
pins get contacted with the other device data pins.
The current code does not disable D+ pull-down resistor during DCD. If this
resistor is not disabled, the current applied on D+ becomes low immediately
even without connecting to any device. Fix it. Remove enable_dcd flag
from platform data as data contact detection is working reliably on all
targets supported by this driver.
(cherry picked from commit 768dcb817554a29b43e269e7cf77785a7f960754)
Change-Id: Idb34508f09dc74983fd2b55bd11f4073ec354e2f
Signed-off-by: Pavankumar Kondeti <pkondeti@codeaurora.org>
Signed-off-by: Neha Pandey <nehap@codeaurora.org>
Support is added for MPEG-2 extension and user data. With this
changes Core returns extension and user data as an extradata.
Change-Id: I66a230aa651dabafa883625ce9f687d5c35b8671
Signed-off-by: Shobhit Pandey <cshopan@codeaurora.org>
Signed-off-by: Neha Pandey <nehap@codeaurora.org>
All msm_ion clients need to use <linux/msm_ion.h> instead of
<linux/ion.h>
Change-Id: I521a079686780c117ccc9d91f27b9c59aaeafa04
Signed-off-by: Mitchel Humpherys <mitchelh@codeaurora.org>
Signed-off-by: Neha Pandey <nehap@codeaurora.org>
Using stored average ibat(shutdown ibat_avg) which came from
previous boot sometimes cause SoC sudden drop in boot up time.
So this patch use fixed ibat_avg value instead of shutdown ibat_avg
during 1st SoC calculation.
Change-Id: I9675652c3b4918529be40a8d6f8ee29b6dee1359
Signed-off-by: Iliyan Malchev <malchev@google.com>
Move driver callbacks to fill strings instead of using seq_files. This
will allow those values to be used in a future tracepoint patch.
Change-Id: I9b706343e35b11124141fe520e520514a32003d2
Signed-off-by: Erik Gilling <konkers@android.com>
With shared data channel architecture, SLIMBUS driver
only removes slimbus channel when all clients vote to
have channel removed. In case of subsystem restart,
client such as MDM can go down without withdrawing
vote. During CODEC path shutdown, CODEC driver will
receive slimbus slave interrupt in time indicating
port disconnection because slimbus channel has not
be been voted off. Then, CODEC driver blindly
shutdown rest of CODEC path. This results in
overflow error on Rx path and underflow error on
Tx path. In case of time out waiting for port disconnect
interrupts to arrive, force ports to disconnect
Signed-off-by: SathishKumar Mani <smani@codeaurora.org>
BUG-ID: 7313016
