There is a corner case in the tty driver where the value of
tty->receive_room is not being updated before writing data to
the line discipline. When this happens, data is lost because
of failure to re-submit any remaining data to the ldisc.
This fix is dependent on a new tty flag that is set only when
the tty driver is used for efs sync betweem the mdm modem and
the applications processor.
CRs-Fixed: 358868
Change-Id: I0ba02980504b4d8187b8c83111c2c883d194efa2
Signed-off-by: Joel King <joelking@codeaurora.org>
Adds an accessor function, irq_is_per_cpu(), for the flag IRQ_PER_CPU.
This is useful if you have an IRQ that is per-cpu in some hardware
implementations, and not in others (example: ARM PMU Interrupts), and
you want to handle both cases.
Change-Id: Ic176ee5b8f9a830c1db35cb939ec659a4cf3f938
Signed-off-by: Chris Smith <chris.smith@st.com>
Signed-off-by: Rohit Vaswani <rvaswani@codeaurora.org>
DIAG SSID ranges are updated on modem side. Hence same
update is needed on application processor side. This
change updates the same.
We plan to implenent an algorithm which will remove the
need for manual updates.
Change-Id: I573b75fe0b88bad6f0b2fd5d1b12eb4530067912
Signed-off-by: Shalabh Jain <shalabhj@codeaurora.org>
Dup ftrace event traffic (including writes to trace_marker file from
userspace) to STM. Also dup printk traffic to STM. This allows Linux
tracing and log data to be correlated with other data transported over
STM.
Change-Id: Ieb0b856447f7667eb0005a6a884211dc46f50217
Signed-off-by: Pratik Patel <pratikp@codeaurora.org>
Provide CoreSight abort debug api to stop the active trace sink
from any context. This is a best effort api that can be used to
abruptly stop and disable the current trace sink from anywhere
in the kernel to avoid tracing and hence polluting the trace data
after the point of interest has been executed.
Change-Id: I34c528d9febec4265088a7267dbcf0e7a1f87fcf
Signed-off-by: Pratik Patel <pratikp@codeaurora.org>
Support for reading hardware data for CoreSight devices from device
tree.
Change-Id: I4d149991c89b458384465d163386084f500a4028
Signed-off-by: Pratik Patel <pratikp@codeaurora.org>
Read the codec specific data from device tree instead of board file.
Change-Id: Iad382b89692903d2434b63d34c7121fe0b4b9dda
Signed-off-by: Kiran Kandi <kkandi@codeaurora.org>
Allow to USB clocks to remain on only for bus suspend case, but turn
off clocks for any other case, such as cable disconnect.
CRs-Fixed: 378955
Change-Id: I4d85b645cfd231126fbc160a0c14273066ce674c
Signed-off-by: Ido Shayevitz <idos@codeaurora.org>
Switch all CoreSight drivers to start using the new CoreSight core
layer code. Remove obsolete qdss code.
Change-Id: I2d4496aea0ffd918e0bfbf4b4e58ad82ea634a59
Signed-off-by: Pratik Patel <pratikp@codeaurora.org>
Define device tree bindings for MSM_THERMAL driver, and implement
matching code to make the driver abide to these bindings.
Change-Id: I6ed08a09f45f8748841cf44db601f28659e49d9c
Signed-off-by: Eugene Seah <eseah@codeaurora.org>
Badger kraits have a single voltage supply coming from the pmic. This
supply is provided by multiple switching regulators operating in
ganged mode.
There is a LDO and a HS (Head Switch) per core that further control the
voltage supply to that core.
This driver manages the ganged supply by calling upon the spm driver to
set phases and voltage.
Change-Id: Idc0a0ae3242729a7e0ede5962974c09b61d8d39c
Signed-off-by: Abhijeet Dharmapurikar <adharmap@codeaurora.org>
When otg_control is set to OTG_PHY_CONTROL and PMIC interrupts are
not used for VBUS notification, a cable connection will fail to
wake up the device from VDD minimized low power mode. The MPM needs
to be configured to wake up the system when the USB_PHY_OTGSESSVLD
interrupt is triggered. As this interrupt may vary by SoC populate
it in the msm_otg_platform_data->mpm_otgsessvld_int member in the
various board files.
CRs-fixed: 376740
Change-Id: Ia54828f538c695ff6b28f5d7b2b49630a45cc673
Signed-off-by: Jack Pham <jackp@codeaurora.org>
The QDSS function driver supports high throughput debug information
delivery from the QDSS core to the host via the USB port.
Change-Id: Ia9397944d39d767c1200ad87aac67d5627233282
Signed-off-by: Shimrit Malichi <smalichi@codeaurora.org>
The QPNP IADC driver supports the user bank
peripheral of the current ADC(IADC).
IADC is a 16 bit ADC used for measuring current.
The single measurement mode is supported to read
current from upto seven channel configuration.
Clients can read the internal/external Rsense,
CSP_EX, CSN_RX along with gain and offset
calibraton channels.
Change-Id: I7e5ae3fc70878d16827d33705853a36bb0aa04f6
Signed-off-by: Siddartha Mohanadoss <smohanad@codeaurora.org>
Add support for vsync notification to user space using user events.
This is to trigger frame composition based on Vsync.
Change-Id: Ie94edfcdb5e540dd2f9a4a5df4bc3b7c4eb9041c
Signed-off-by: Padmanabhan Komanduru <pkomandu@codeaurora.org>
Signed-off-by: Jeevan Shriram <jshriram@codeaurora.org>
Update slimbus slave driver to use updated address depending on discovered
The wcd9320 Taiko codec introduced a new register address map to configure
slimbus slave device.
Change-Id: I41e9ebabd1d375a1904b6033e46736b2fb6365f9
Signed-off-by: Joonwoo Park <joonwoop@codeaurora.org>
Allow other drivers to change the supply type of a given power
supply. This is required when a USB driver determines the exact
USB connection type and needs to notify the owner of the usb power
supply struct.
Change-Id: I99d377628a296704e1dcd170251ab9ceadc653ec
Signed-off-by: David Keitel <dkeitel@codeaurora.org>
diag does not support logging to sockets. Add support for
new socket logging mode to support sockets.
Change-Id: I1134859825f9e075ee911c94376a239d748e311f
Signed-off-by: Dixon Peterson <dixonp@codeaurora.org>
Add the PWM devicetree bindings for the PWM/LPG device present in
Qualcomm PM8941 chipset. Also make the necessary changes to the driver
to comply with the devicetree binding requirements.
Change-Id: I8124e2541028719e5b747bc85ff548ac109a9735
Signed-off-by: Jay Chokshi <jchokshi@codeaurora.org>
Currently as part of host bus suspend handling, voting for
XO shutdown and VDD minimization due to which devices connected
to HSUSB 3rd instance will not wakeup the system from system suspend.
Add support for USB remote wakeup feature for detecting devices
connected on HSUSB 3rd instance in case of VDD minimization provided
HW rework for routing D+ line to MPM is implemented.
CRs-Fixed: 380386
Change-Id: Ie8560b99c51efc466dfd257747bbf38bec6e6ba0
Signed-off-by: Vijayavardhan Vennapusa <vvreddy@codeaurora.org>
Add USB bam changes to support QDSS in msm-8794.
Main additions:
Support device-tree files.
Add disconnect bam pipe support.
Add new API to retrieve pipe connection: get_bam2bam_connection_info.
Change-Id: I200d44dee319b8a9efda31b238c99202efddaa07
Signed-off-by: Shimrit Malichi <smalichi@codeaurora.org>
Add a configuration option to enable or disable
the reverse boost fix for the DC charging path.
Some board designs do not utilize the DC_IN path
on the PMIC, however they do use the presence
detection of DC_IN to enable the auto switching
and interrupt features. In these particular configurations
the PMIC does not control the DC OVP FETs.
Hence add an option to enable or disable the DC path workaround
and leave the workaround disabled by default.
Change-Id: I1e55bbfe37c7cc6f62581af11280a565ed648c06
Signed-off-by: David Keitel <dkeitel@codeaurora.org>
wcnss related host drivers can use these APIs to prevent Apps suspend.
WLAN driver uses this API to prevent suspend, when it's module
initialization routines are being executed.
Change-Id: Id072804e6ccc953c78caf6cf11c73e0ea1d71d18
Signed-off-by: Sameer Thalappil <sameert@codeaurora.org>
Add struct virtqueue_ops back into the virtio core code to facilitate
the use of virtqueue implementations other than vrings. This allows
virtqueue implementations that use SMD drivers, USB drivers, or other
mechanisms for transport.
Add a new virtqueue operation, virtqueue_get_impl_size, to provide the
functionality of virtqueue_get_vring_size from the previous collapsed
implementation.
This commit partially reverts commit
7c5e9ed0c8.
Change-Id: I1219c4f203879658dce5800f405291bf311564b4
Signed-off-by: Yatin Manerkar <yatinm@codeaurora.org>
When the fault injection framework introduces an error to the data
block, the current code queries the SD card to find the number of
blocks actually programmed. This value would be as requested by the
generic block layer. So the entire request would be completed.
Say, request 0 is pulled from queue and submitted. When this is being
processed, request 1 is pulled from queue and prepared. Request 0
though is successful, fault-injection framework injects an error
and modifies the bytes_xferred variable to a random value less than
requested transfer. Request 1 is not processed and during the handling
of error, the SD card is queried for the actual bytes programmed. This
would be the correct value. Thus blk_end_request would complete
this request and the control would return to fetch request 2. In this
process, request 1 is not processed at all and the application waits
indefinitely for request 1 to be processed. No further requests are
issued to the queue.
This patch identifies, if the fault injection-framework has inserted an
error to this request and doesn't query the card and uses
bytes_xferred to complete the request.
Change-Id: I496802e244745bc7550402027a594d967cf7b756
Signed-off-by: Asutosh Das <asutoshd@codeaurora.org>
Reserved fields of fb structure used for various use cases
in qcom fb driver. Reducing the reserved fields caused lot
of side effects and it will change the reserved fields same
as kernel 3.0.
Change-Id: I7bf82a9b5667cb5c84b54e428bbfcb6869157bd7
Signed-off-by: Nagamalleswararao Ganji <nganji@codeaurora.org>
Make thermal monitor performance hit more gradual by stepping down
limit frequency instead of jumping directly to that frequency.
The monitor now steps down to the lowest available cpufreq
frequency, instead of fixing the limit frequency to 918MHz. Also
update the polling frequency to 250ms to improve responsiveness.
Change-Id: I6edb0cfc057284023978de04d7835e9783da5ebd
Signed-off-by: Eugene Seah <eseah@codeaurora.org>
This patch will queue multiple surfaces and commit those
surfaces into mdp at same instance so that surfaces will
be blended and displayed at same time. Hardware vsync event
is delivered to the user space frame work via uevent. Both
queue and commit are controlled by frame work and synchonized
with vsync event. Therefore frame rate will match with vsync rate.
Change-Id: If630a6d94fd38483ee313f575b1a71ed8bd65a52
Signed-off-by: Kuogee Hsieh <khsieh@codeaurora.org>
Add support for CSC and QSEED configuration through MSMFB_OVERLAY_SET and
MSMFB_OVERLAY_PLAY ioctls. Provide better integration than previous attempt
with the existing Overlay and PostProcessing APIs.
CRs-Fixed: 380750
Change-Id: If895391074ef1e7d7a6824d289e1ed9da6a52180
Signed-off-by: Carl Vanderlip <carlv@codeaurora.org>
Remove old implementation of HSIC and QSEED smoothing/sharpening overlay
integration. Need to replace with new implementation that better integrates
the existing functions of the two APIs.
CRs-Fixed: 380750
Change-Id: Id3469fad16764ed88e74a8da75bb873f726ba366
Signed-off-by: Carl Vanderlip <carlv@codeaurora.org>
Signed-off-by: Pravin Tamkhane <pravint@codeaurora.org>
Add support to read the tables of QSEED values. When the values of the
QSEED tables are able to be written to, it is beneficial to be able to read
what's there as well.
CRs-Fixed: 380315
Change-Id: I3110721906424f70a12bf5736de7875dec03f4c6
Signed-off-by: Carl Vanderlip <carlv@codeaurora.org>
The msm specific parts of ion.h are being moved into a new header
file. For now, add a dummy header file to get clients transitioned
over.
Change-Id: Iac039678e1c3f15d87e67aa667f7e9883ca16669
Signed-off-by: Laura Abbott <lauraa@codeaurora.org>
This allows users to switch between available trace sinks thus
providing user to choose the best switch for the debug use case.
Change-Id: I0c90396010cfcd9f3ab9d3c6d4c1cc7230632c42
Signed-off-by: Pratik Patel <pratikp@codeaurora.org>
APPS vote from coldboot may be still pending when SSR is invoked;
so make sure that the APPS votes from coldboot are cancelled before
SSR votes for these Riva regulators.
Change-Id: I975be7470ce08e941c5846642a9379f23574915b
CRs-fixed: 380434
Signed-off-by: Sameer Thalappil <sameert@codeaurora.org>
usbnet driver uses tasklet as bottom half handler. Since tasklet
runs in interrupt context in case of high throughput driver is
spending more time in interrupt context to process rx buffers
this is causing watch dog reset. Hence replace the tasklet with
workqueue to avoid watchdog reset.
CRs-Fixed: 378526
Change-Id: I8eac339e37d734dbaaf7a2e874d3974f562e8680
Signed-off-by: Hemant Kumar <hemantk@codeaurora.org>
The QPNP VADC driver supports the User Bank Peripheral of
the voltage ADC(VADC).
VADC is a 15 bit ADC that measures signals through the
Main analog multiplexer (AMUX) and PREMUX. The driver
arbitrates the request to issue ADC read requests.
VADC driver includes support for the conversion sequencer.
The conversion sequencer is a HW triggered signal to start
ADC measurement on trigger events for PA ON,
camera flash and TX threshold.
The AMUX supports external pull-ups simultaneously. Clients
can select the appropriate AMUX input channel to measure the
ADC for the intended pull up configuration.
Change-Id: I8886968ccec54ad03334b113b4516d4d200e0da8
Signed-off-by: Siddartha Mohanadoss <smohanad@codeaurora.org>
Add UASP function to Android supported functions array. UASP
function depend on Target core. Provide empty functions when
Target core is not enabled.
Change-Id: I959f26ebd63e036dae041708d0ad6169213a3cf0
Signed-off-by: Pavankumar Kondeti <pkondeti@codeaurora.org>
For Android/Linux kernel 3.4. This is the initial commit.
Change-Id: I96e300d7b59743df1f757746228b47b5d444c76c
Signed-off-by: Samuel Huo <samuel.huo@st.com>
Signed-off-by: Wentao Xu <wentaox@codeaurora.org>
This test write data to the card, then send DISCARD on random
addresses on the card, send SANITIZE to the card to erase all
the unmapped areas.
Change-Id: I2904023ccd258e64b99b004bacfbe576b0ead59a
Signed-off-by: Maya Erez <merez@codeaurora.org>
When multiple clients request qseecom to load an application, an app
id is assigned. If the request is to load an app that already exists
in qsee, the app id should return to the qseecom library.
Returning the app id was done in the qseecom_load_app() but not done
in the qseecom_query_app_loaded(). This change fixes the issue when
multiple clients request to load the same app in qsee.
Change-Id: Icaa5053906b61ace1d257ff1c96308cc89e3a9cc
Signed-off-by: Ramesh Masavarapu <rameshm@codeaurora.org>
MHL discovery is initiated upon detecting ID ground state.
This happens via an ID interrupt or charger detection work.
Allow low power mode when MHL cable is connected.
Change-Id: I3565817b53eb444509cf56269103921814147af9
Signed-off-by: Pavankumar Kondeti <pkondeti@codeaurora.org>
Signed-off-by: Abhishek Kharbanda <akharban@codeaurora.org>
Signed-off-by: Manoj Rao <manojraj@codeaurora.org>
mdm-driver is informed that an image upgrade of the remote modem is
required, at which point it stops monitoring the error gpios and takes
the appropriate actions. Support for the "USB Switch" gpio is added.
This is needed to write a image to an empty modem flash.
Change-Id: I4c05a80955124a3eb7edc11e99f4945f9de79e6b
Signed-off-by: Ameya Thakur <ameyat@codeaurora.org>
Add vendor specific controls to get and set the profile and
level of H263 clips.
Change-Id: I79e6eeb8eb2eb4ff3f5cbbe3b537e7b60ff1372a
Signed-off-by: Deva Ramasubramanian <dramasub@codeaurora.org>
Adding MHL api's for device discovery and registering
callback mechanism.USB driver use these API's for
synchronization with MHL driver.
Change-Id: I0846951302e3b5f5d20d566c92c2f224528ca455
Signed-off-by: Manoj Rao <manojraj@codeaurora.org>
Signed-off-by: Abhishek Kharbanda <akharban@codeaurora.org>
Several flattened device tree functions are currently accessed in a
file that is compiled regardless of whether device tree is enabled
or not. Add stubs for these functions if device tree is not selected.
Change-Id: I0bea3325692fac46d3e5ef457aa30e083f71cd6d
Signed-off-by: Laura Abbott <lauraa@codeaurora.org>
Add support for tricolor leds on Qualcomm's MSM
boards.
Change-Id: Ib05d6129f98cf67e7d208465a13cc6b1300c6277
Signed-off-by: Mohan Pallaka <mpallaka@codeaurora.org>
user-space programs using demux require to be notified
on several kinds of events such new PES event,
new section event, new recording-chunk event and
other error events. demux API was extended to meet
this requirement
Change-Id: I768b6acde346139e194a3e6637b6fc0fc9648446
Signed-off-by: Hamad Kadmany <hkadmany@codeaurora.org>
Export the epm header files for clients from userspace
to send commands to the driver.
Change-Id: I9b413f461da58cbf92aefeca9285ac6798468ea2
Signed-off-by: Siddartha Mohanadoss <smohanad@codeaurora.org>
