Closing VCAP devices could be called without calling stream off:
This problem would make VCAP resources taken by devices no longer
running.
Using unsigned variable to store signed result: This problem would
allow stream on to continue even when function returned error.
Fix problem of reading VP irq status register too early: It was
possible for cadence detection bit to be propgated faster by only
a few clock cycles then the picture done bit. When the irq status
read was performed and by the time a write to the clear register
was performed the picture done bit would propgate. Since the irq
is rising edge triggered this would cause a problem and the irq
would not be triggered until VP was reset.
Remove unused code
Change-Id: Iba72354c06287efb27178edf64d8d3f459dbf954
Signed-off-by: Terence Hampson <thampson@codeaurora.org>
Add support for tricolor leds on Qualcomm's MSM
boards.
Change-Id: Ib05d6129f98cf67e7d208465a13cc6b1300c6277
Signed-off-by: Mohan Pallaka <mpallaka@codeaurora.org>
user-space programs using demux require to be notified
on several kinds of events such new PES event,
new section event, new recording-chunk event and
other error events. demux API was extended to meet
this requirement
Change-Id: I768b6acde346139e194a3e6637b6fc0fc9648446
Signed-off-by: Hamad Kadmany <hkadmany@codeaurora.org>
When session CLOSE command is sent right before session RUN command
is acknowledged, callback function can mistakenly think that
the next received acknowledgement is for CLOSE command instead of
RUN command. This triggers driver to send memory unmap command to
the Q6 while it is still processing the CLOSE command. Eventually,
this leads to an invalid memory access and causes Q6 crash.
Change-Id: Ib5d560fbcb7e8ced79cc1075a9f6bea3b55a86b6
CRs-Fixed: 377281
Signed-off-by: Jay Wang <jaywang@codeaurora.org>
This change fixes a crash when running VCAP in de-interlace mode.
The problem was noticed in the introduction of kernel 3.4. VCAP
was improperly using the videobuf2 framework APIs. Since VCAP is
already reliant on queue structure provided by videobuf2 framework,
we created our own basic version of the qbuf and dqbuf calls that
have some similarities to the videobuf2 framework. This addition
was necessary since we are calling qbuf from a kernel work thread.
Since moving to kernel 3.4 there has been a change in videobuf2
qbuf that dereferences the current process.s mm_struct, from a
kernel work thread this struct is NULL, which was causing a crash.
When we are de-interlacing a captured video we are cycling the
buffers internally in the driver, which is why we needed to create
our own q/dq buffer functionality.
Change-Id: Id51b775ae7f0a58bbac8a581e07fa02417802a30
Signed-off-by: Terence Hampson <thampson@codeaurora.org>
Export the epm header files for clients from userspace
to send commands to the driver.
Change-Id: I9b413f461da58cbf92aefeca9285ac6798468ea2
Signed-off-by: Siddartha Mohanadoss <smohanad@codeaurora.org>
Flushing the core is now done with the V4L2_DEC_QCOM_CMD_FLUSH ioctl
rather than V4L2_DEC_CMD_STOP. The latter is confusing and the
arguments specified by the V4L2 spec do not allow for flushing the input
and and output buffers seperately.
Change-Id: I53e18e06c4e09ee8496bdcc337b4798f22911708
Signed-off-by: Deva Ramasubramanian <dramasub@codeaurora.org>
The current code registers multiple devices for i2c clients. This
results in code repetition. instead its better to register single
i2c client and register codec based on device id.
Change-Id: Ifb4adbd47b7a2bf7d32be637fd0641545cd84286
Signed-off-by: Asish Bhattacharya <asishb@codeaurora.org>
Add method for scaling backlight based off of a user provided ratio and
minimum level for the scaling to be applied.
Change-Id: I74c2329c842dd9cbbc9eddfff38cd56fd0e939a4
Signed-off-by: Carl Vanderlip <carlv@codeaurora.org>
Add a new LUN(lun0) which will be exposed as a CD-ROM having the
attributes ro(read-only) & removable as enabled.
This CD-ROM lun is used for saving read-only files which can be used
for system requirements.
Change-Id: Idff5aea8bce233e8b77a4b689323a2f1eb2523e1
Signed-off-by: Rajkumar Raghupathy <raghup@codeaurora.org>
The pdata structure and associated structs have no business being
in msm_kgsl.h. Move them to include/mach/kgsl.h where they can
thrive in a non-userspace facing environment.
Change-Id: Ic0dedbadfe0d3d7d44f50c8a9a7f4cc59057d44b
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Low power mode changes are made in system information mode,
so modify ISR to check for completion of transition into this
mode. Then, modify values and transition back into operating
mode. Enable handshaking so that no communication is missed.
Change-Id: I0692e13810ab4aa88f8626d75a4e7f1ceb885a71
Signed-off-by: Amy Maloche <amaloche@codeaurora.org>
Add flag for handling secure session to rotator data passed during
start ioctl call.
Change-Id: Id5db8b4be1f5058cb9cb9227963acc288eebc1dd
Signed-off-by: Ravishangar Kalyanam <rkalya@codeaurora.org>
OEMs use SSID in a specific range. Recently DIAG changed the mask
update algorithm and this range was missed as its not used internally.
This change adds it back.
CRs-Fixed: 359379
Change-Id: Ib7249f157e4e37294b6da6580fcf19995afeef8f
Signed-off-by: Shalabh Jain <shalabhj@codeaurora.org>
PM8917 has a new register which allows configuring
the falling USB under voltage detection (UVD) threshold
from 3.85V to 4.35V in 100 mV steps.
Add an API that allows to set this value per default and
also only do this for PM8917 chips.
Change-Id: I9b4259b43f148762ac72af40bdc79b895d9b4fc2
Signed-off-by: David Keitel <dkeitel@codeaurora.org>
Microphone Bias may or may not have an external bypass capacitor
depending on the board configurations. Add the microphone bias
capless mode setting to the platform data for codec
CRs-fixed: 363941
Change-Id: Ia949d240b3b3122bc4bd6aca02ee5b6cd785d246
Signed-off-by: Bhalchandra Gajare <gajare@codeaurora.org>
After upgrading to kernel 3.4, there is 5 second delay
at the closing of PCM playback. The delay is due to missing
EOS from QDSP6 audio session manager causing pcm close function
of PCM platform driver to wait for 5 seconds. The root cause
for missing EOS is that ALSA dynmic PCM shutdown sequence has
changed. Now, trigger stop is called on the back-end DAI-LINK.
Furthermore, back-end trigger stop is called before front-end
trigger stop. Since sink stops rendering data, data at source
will never get consumed. EOS event will not arrive. As trigger
operation has to be atomic, it is very difficult to guarantee
sequence on shutting down various modules in QDSP6. The decision
is to abandon starting and stopping QDSP6 AFE port in trigger
function. This decision is considered acceptable as playback
and capture over SLIMBUS is no longer subject to strict sequence
which Q6 AFE port must be started after CODEC configuration.
Change-Id: I0cc1d8b7d058052d7fae55c84b6be46b5b0678e9
CRs-fixed: 373966
Signed-off-by: Patrick Lai <plai@codeaurora.org>
Currently reading PMIC ID line status immediately once PMIC interrupt
is triggered. This leads to returning wrong ID line state sometimes
and causes not detecting connected devices. Hence add debouncing time
of 5msec for PMIC ID line state to settle down before reading PMIC
ID status.
CRs-Fixed: 371552
Change-Id: I4a5eae1d3759b5cc5c7ab70c4bde900a57ec1bd1
Signed-off-by: Vijayavardhan Vennapusa <vvreddy@codeaurora.org>
Add IIR2 filter interface for the wcd9304 codec.
Control the two 5 band IIR filters in the audio
codec through mixer controls. Enable individual
IIR filter bands and set band coefficients.
Change the IIR filter code to use snd_soc_write
instead of snd_soc_update_bits. If update bits
is used the IIR registers may not be correctly
updated.
Change-Id: I92fc147641e9eb270d8176f20445371fe5cc2f92
Signed-off-by: Asish Bhattacharya <asishb@codeaurora.org>
If Q6 does not support DTS, LA driver has to exit gracefully.
Introducing a new member cmd_response in audio_client structure
to indicate format is supported or not, and use this cmd_response
to return error from open_write.
Change-Id: Icad30c787e8a5f26ead92584e163721b94ba509d
Signed-off-by: Srikanth Uyyala <suyyala@codeaurora.org>
Add the qpnp-pwm driver to support LPG/PWM devices in Qualcomm
plug-and-play (QPNP) PMIC chips. QPNP chips make use of
Qualcomm's SPMI register convention. LPG module provides a superset
of functionality provided by PWM device such as user defined pattern
generation, driving multiple PWM channels etc.
Change-Id: I29a22c6e655612d93cac10e6eea76383d37775e2
Signed-off-by: Jay Chokshi <jchokshi@codeaurora.org>
Finer granularity is needed when mapping into the IOMMU's for
rotator and mdp for secure playback. During secure playback
HLOS will only have access to map into one context bank. The
other context bank is secured and programmed by TrustZone.
Divide DISPLAY_DOMAIN into DISPLAY_WRITE_DOMAIN and
DISPLAY_READ_DOMAIN. Divide ROTATOR_DOMAIN into ROTATOR_SRC_DOMAIN
and ROTATOR_DST_DOMAIN.
Change-Id: I2d67525d6026b8a1fb2f2cb00e4bb118c8eb6f27
Signed-off-by: Olav Haugan <ohaugan@codeaurora.org>
MVS driver to send correct frame type for EVRC codec.
Add comments in header file to improve readability.
Add new enumeration for g711 codec.
Change-Id: I359729126df29ece9ff3fc8414e73059da9d98e7
Signed-off-by: Sidipotu Ashok <sashok@codeaurora.org>
Adds new event type to convey about the resources
requirement.
Change-Id: I7ea67231c247dc983463a02b828c10adc486b60d
Signed-off-by: Praneeth Paladugu <ppaladug@codeaurora.org>
Proprietary chargers pull D+/- to specific voltages between 2.0-3.3V
(VLGC) for identification. The DM voltage may not exceed VLGC due
to pull-down resistor. Hence a proprietary charger is detected as
a Standard downstream port (SDP). Read line state to distinguish
between SDP and proprietary charger. The DP voltage would exceed
VLGC for proprietary chargers.
D- can be greater than VLGC when a low speed device is attached via
Accessory charger adapter (ACA-A). Hence mark the charger as ACA-A
if ID resistance is RID_A and D- > VLGC
CRs-Fixed: 368688
Change-Id: I3497efbe025abf150078a19d69254f75f5df5b2a
Signed-off-by: Pavankumar Kondeti <pkondeti@codeaurora.org>
Halt the system when HSIC system error happens and dump HSIC
link registres. Also, save the address of msm_hsic_hcd
structure to a global pointer.
CRs-Fixed: 375536
Signed-off-by: Hemant Kumar <hemantk@codeaurora.org>
Change-Id: Ia346778911f610338f38492bc1ff0e8a9c7a87c7
If the receive retry queue size gets too large, then automatically
enable flow control to prevent having to drop buffers.
Change-Id: If27599015b362ce013e177ee350e026933390d72
Signed-off-by: Eric Holmberg <eholmber@codeaurora.org>
This ccadc module is reused in multiple pmics. It is now unnecessary
to check for 8921 versions in the driver. As a result of this change
older 8921 versions are not supported.
CRs-Fixed: 372679
Change-Id: I2114f9428e2ba1a29c2bc9caaaa75106caf1dfc3
Signed-off-by: Abhijeet Dharmapurikar <adharmap@codeaurora.org>
The Contiguous Memory Allocator is a set of helper functions for DMA
mapping framework that improves allocations of contiguous memory chunks.
CMA grabs memory on system boot, marks it with MIGRATE_CMA migrate type
and gives back to the system. Kernel is allowed to allocate only movable
pages within CMA's managed memory so that it can be used for example for
page cache when DMA mapping do not use it. On
dma_alloc_from_contiguous() request such pages are migrated out of CMA
area to free required contiguous block and fulfill the request. This
allows to allocate large contiguous chunks of memory at any time
assuming that there is enough free memory available in the system.
This code is heavily based on earlier works by Michal Nazarewicz.
Change-Id: I8a04c58b0d39ee7343ac0b58b6dad9d57912c91d
[lauraa: fixed Kconfig conflict]
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Michal Nazarewicz <mina86@mina86.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Tested-by: Rob Clark <rob.clark@linaro.org>
Tested-by: Ohad Ben-Cohen <ohad@wizery.com>
Tested-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Tested-by: Robert Nelson <robertcnelson@gmail.com>
Tested-by: Barry Song <Baohua.Song@csr.com>
Signed-off-by: Laura Abbott <lauraa@codeaurora.org>
alloc_contig_range() performs memory allocation so it also should keep
track on keeping the correct level of memory watermarks. This commit adds
a call to *_slowpath style reclaim to grab enough pages to make sure that
the final collection of contiguous pages from freelists will not starve
the system.
Change-Id: I2d68d9ac2cfcd32ca6f515fc7e44e8d9d850dff1
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
CC: Michal Nazarewicz <mina86@mina86.com>
Tested-by: Rob Clark <rob.clark@linaro.org>
Tested-by: Ohad Ben-Cohen <ohad@wizery.com>
Tested-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Tested-by: Robert Nelson <robertcnelson@gmail.com>
Tested-by: Barry Song <Baohua.Song@csr.com>
Signed-off-by: Laura Abbott <lauraa@codeaurora.org>
If due to timing issues out of our control, an outbound ATT Indicate
is delayed to the point that user space code does not receive
confirmation within it time-out period, both Client and Server
sockets must be torn down. We also must always respond to incoming
ATT Indicate pkt with a Confirmation, as the Error Response is an
illegal response for Indicate.
CRs-Fixed: 363355
Change-Id: I4003a59e1a731a08818f18d5b79db537e2aa2619
Signed-off-by: Brian Gix <bgix@codeaurora.org>
Currently, qseecom user-space library does not have a way to
verify if a particular secure application is loaded in the
qsee or not. This new ioctl solves this issue.
Change-Id: Ia96459f3b8aadee2f6a3af564bb1cc83695759b5
Signed-off-by: Ramesh Masavarapu <rameshm@codeaurora.org>
Adding new usb_core_id property which is used to match an instance
of struct usb_gadget to an instance of struct usb_gadget_driver.
This will allow constructing more then one usb periheral stack.
This new property is optional and if not specified in both the gadget
and gadget driver then it will have the default value of zero.
Change-Id: Idbab46ed76267ab4827319f2f9efe67c91b50dbd
Signed-off-by: Ido Shayevitz <idos@codeaurora.org>
Currently the code does not have a mechanism to remember the soc
reported just before shutting down and upon restarting the new
soc reported is off from the previous soc value reported.
This change introduces
- a method to save soc in an unused coincell back register: ssbi address
0x107 is not used on 8921 and serves the purpose of storing the soc.
The driver reads this value and uses it to scale the reported soc.
- a method to detect that a battery was removed and perhaps replaced by a
different one. If the battery is found replaced the driver is notified
of the change and it disregards the soc value it read from the backup
register. The charger driver has a battery backed bit (force vref
therm) which it sets in its initialization sequence. Once set the
value remains between restarts, unless the battery is removed. The
default value of this bit is 0. Hence if a zero is detected before
writing to it, battery was removed between restarts - this mechanism
is used to notify the BMS to disregard the soc read from the backup
register.
Note that for this to work correctly the bootloader needs to be updated to
not overwrite register 0x107 upon restart.
CRs-Fixed: 370287
Change-Id: If7d098552d36eb27a396ee7d37f78d3629861f6e
Signed-off-by: Abhijeet Dharmapurikar <adharmap@codeaurora.org>
Add support for multiple ispif interfaces streaming concurrently.
PIX abd RDI interface can stream at same time or two RDI interfaces
may stream at one time depending on usecase
Change-Id: Ib3cef418cd2816bc19891c1855e1dcae5a2a55a1
Signed-off-by: Nishant Pandit <npandit@codeaurora.org>
The MIGRATE_CMA migration type has two main characteristics:
(i) only movable pages can be allocated from MIGRATE_CMA
pageblocks and (ii) page allocator will never change migration
type of MIGRATE_CMA pageblocks.
This guarantees (to some degree) that page in a MIGRATE_CMA page
block can always be migrated somewhere else (unless there's no
memory left in the system).
It is designed to be used for allocating big chunks (eg. 10MiB)
of physically contiguous memory. Once driver requests
contiguous memory, pages from MIGRATE_CMA pageblocks may be
migrated away to create a contiguous block.
To minimise number of migrations, MIGRATE_CMA migration type
is the last type tried when page allocator falls back to other
migration types when requested.
Change-Id: I2bb0954de8be4f212b03dea0e5a508048684bda2
Signed-off-by: Michal Nazarewicz <mina86@mina86.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Acked-by: Mel Gorman <mel@csn.ul.ie>
Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Tested-by: Rob Clark <rob.clark@linaro.org>
Tested-by: Ohad Ben-Cohen <ohad@wizery.com>
Tested-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Tested-by: Robert Nelson <robertcnelson@gmail.com>
Tested-by: Barry Song <Baohua.Song@csr.com>
Signed-off-by: Laura Abbott <lauraa@codeaurora.org>
This commit adds the alloc_contig_range() function which tries
to allocate given range of pages. It tries to migrate all
already allocated pages that fall in the range thus freeing them.
Once all pages in the range are freed they are removed from the
buddy system thus allocated for the caller to use.
Change-Id: I659b133b1c9991568bfb6bd09c7792e15f2a2bfb
Signed-off-by: Michal Nazarewicz <mina86@mina86.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Mel Gorman <mel@csn.ul.ie>
Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Tested-by: Rob Clark <rob.clark@linaro.org>
Tested-by: Ohad Ben-Cohen <ohad@wizery.com>
Tested-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Tested-by: Robert Nelson <robertcnelson@gmail.com>
Tested-by: Barry Song <Baohua.Song@csr.com>
Signed-off-by: Laura Abbott <lauraa@codeaurora.org>
Due to some reason, user can decide to abort a live
snapshot while it is in progress. Add support to stop
the VFE write masters right away so that the VFE
stops writing on the buffers allocated by the user.
Also send an ACK message to userspace once we get
confirmation from VFE that it has stopped using
the buffers.
CRs-Fixed: 373080
Change-Id: Ia4d9134298dd3a1a51f5829f9bcc2b80d6f21d0f
Signed-off-by: Kiran Kumar H N <hurlisal@codeaurora.org>
Problem Description:
Open and close the same set of slimbus ports after
certain iterations will fail port open, as that port
was not disconnected successfully.
Fix Description:
Handle sequence of closing slimbus ports. Store
the channel masks associated with each codec dai
and reset them after they are closed from slimbus
Then, release the close slimbus port event, after
all the channels are closed completely
Change-Id: Ie14b9f0920b37f905151b48f18df181503acc21d
CRs-fixed: 370761
Signed-off-by: Swaminathan Sathappan <Swami@codeaurora.org>
Modem header files added new SSID. We need same changes on Linux side.
Change-Id: Ia383fd1f8ab889369b2577ae2df13894a1a62f7a
Signed-off-by: Shalabh Jain <shalabhj@codeaurora.org>
This change addresses an L2CAP ERTM throughput problem when a remote
device does not fully utilize the available transmit window.
The L2CAP ERTM transmit window size determines the maximum number of
unacked frames that may be outstanding at any time. It is configured
separately for each direction of an ERTM connection. Each side sends a
configuration request with a tx_win field indicating how many unacked
frames it is capable of receiving before sending an ack. The
configuration response's tx_win field shows how many frames the
transmitter will actually send before waiting for an ack.
It's important to trace both the actual transmit window (to check for
validity of incoming frames) and the number of frames that the
transmitter will send before waiting (to send acks at the appropriate
time). Now there are separate tx_win and ack_win values. ack_win is
updated based on configuration responses, and is used to determine
when acks are sent.
CRs-fixed: 370909
Change-Id: I6d9ef55a2ff2f5f3d0117ad376a09e4cc26fe742
Signed-off-by: Mat Martineau <mathewm@codeaurora.org>
Complete the rename by changing cs to coresight for variables,
functions and constants.
Change-Id: I506d5872e5c09f201c4f3674d7722d36eca26921
Signed-off-by: Pratik Patel <pratikp@codeaurora.org>
Since cs is not a well known acronym for CoreSight, rename
directory and files from cs to coresight.
Change-Id: I5f9b12794b80b1c01c9ce0621d53ee6be408a361
Signed-off-by: Pratik Patel <pratikp@codeaurora.org>
Each device driver manages its own clk by using the clk apis that
now support CoreSight clock. Remove qdss clock wrapper functions
and their usage.
Change-Id: If73198f273f69e5525a6444e7a7c277c20c96111
Signed-off-by: Pratik Patel <pratikp@codeaurora.org>
Support for CoreSight core layer apis that will be used by other
CoreSight drivers.
Change-Id: Ieddc3dd362ee8e641abc557153d0a3e38aa9beab
Signed-off-by: Pratik Patel <pratikp@codeaurora.org>
To support generic coresight driver, move stm header file from
mach-msm to include/linux
Change-Id: I6f83d28156fac72a2c35637b7f9b9b58d10d964d
Signed-off-by: Pratik Patel <pratikp@codeaurora.org>
Create new jtag header file and move jtag related definitions to
it. This will decouple jtag code and help make coresight code
generic.
Change-Id: I722de9945800a4d0ba5b792c1b6dda5fc0b3cc40
Signed-off-by: Pratik Patel <pratikp@codeaurora.org>
