usb_autopm_get_interface() returns an error if runtime PM is disabled,
yet this should not impede the ability to submit URBs. This can happen
just as the device is removed but the interface driver's disconnect()
routine has not been called. Thus any client wishing to call read or
write may errorneously continue to call and might eventually flood the
console with excessive printks which could cause a watchdog timeout. So
treat -EAGAIN and -EACCES as okay and only bail on other error values.
Also, rate-limit the printks associated with reading/writing on the
bridge to further avoid the possibility of excessive logging during
similar corner cases.
Finally, use -ENODEV as an indicator that read/write should halt. This
will handle the case when an URB fails to submit late in the device
disconnect stage, and the client should not attempt any more submissions.
CRs-fixed: 370694
Change-Id: Ia5f4a4bd7ed620eedd2cd00c117066b8c7eb4f8c
Signed-off-by: Jack Pham <jackp@codeaurora.org>
A different version of this driver is in mach-msm and we want to
use that driver so just don't compile this driver from upstream.
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
This adds tpmd_dev from the tpm-emulator source, so we don't have to compile it externally. It also adds config.h, which unfortunately is not in the source---it's an intermediate compilation result.
Signed-off-by: semenzato@chromium.org
Review URL: http://codereview.chromium.org/1602016
[move tpmd_dev/ to drivers/char/tpm and modifed Makefile there]
Signed-off-by: Tianyi Gou <tgou@codeaurora.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Add support for the STMicroelectronics I2C Trusted Platform
Module (TPM).
Change-Id: I3e23a72f3624280da93bb3a487f2a154b39916e9
Signed-off-by: Philip Elcan <pelcan@codeaurora.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Squashed commit of the following:
commit c3fb53893cbc4b5e217ef176010d1b88982a9454
Author: Alexander Kolesnikov <akolesni@codeaurora.org>
Date: Wed Sep 15 17:16:52 2010 +0200
csdio: Set/get vdd ioctl support
Implement power up/down sequence for internal UBM chip.
This commit includes generic, platform independent part.
CRs-Fixed: 255849
Change-Id: I526c78765ba32b310463a231c5cf578cb37c6deb
Signed-off-by: Alexander Kolesnikov <akolesni@codeaurora.org>
commit e1ba27311fcf3de2a5ca9a3fc1303328720dd120
Author: Nela Gurevich <nelag@codeaurora.org>
Date: Thu Aug 19 14:00:09 2010 +0300
csdio: Move csdio.h to kernel/include
Change-Id: Idf8df750e9f3bcc014d1afa673c9c27c97253195
Signed-off-by: Nela Gurevich <nelag@codeaurora.org>
commit 31d1b09c677c26efb71fa36ff6fe1e7f2d83abbc
Author: Alexander Kolesnikov <akolesni@codeaurora.org>
Date: Tue Aug 10 13:26:20 2010 +0300
mmc: Char SDIO Device Driver
The Char SDIO Device Driver is an interface which exposes an SDIO
card/function from kernel space as a char device in user space.
Change-Id: If298cdd6d4426b700e69affa5a3602cd221ad89c
Signed-off-by: Alexander Kolesnikov <akolesni@codeaurora.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
This is a combination of 13 commits.
commit 59a27ca89fb515caeac2b97059832515566f70d9
Author: John Howe <jhowe@codeaurora.org>
Date: Tue Jan 4 17:18:54 2011 -0500
hw_random: Add Qualcomm MSM random number driver
This driver uses the hardware random number generator on MSM chips.
Change-Id: I13b4d831fb9b5487356af466536a9005107ff723
Signed-off-by: John Howe <jhowe@codeaurora.org>
commit 09cae33a80706e0aa77bdc4e1b493ef2a36dbbde
Author: John Howe <jhowe@codeaurora.org>
Date: Fri Jan 14 10:21:05 2011 -0500
hw_random: add PRNG clock control
Change-Id: I6d9dd2ee7c50020fb8d41242b655e172e4c9eff2
Signed-off-by: John Howe <jhowe@codeaurora.org>
commit 0573eda3ce19c01825ded4fe850362c37460dc20
Author: John Howe <jhowe@codeaurora.org>
Date: Mon Jan 24 14:56:06 2011 -0500
hw_random: remove clk frequency control
The clock only supports one rate, 64MHz, and is set to that
rate by default.
Change-Id: I820c74e44f4ebdec7b891a4c89d681cb5c3dcee6
Signed-off-by: John Howe <jhowe@codeaurora.org>
commit fab0a4d40e18be4a31a4720acafb128893c620e8
Author: John Howe <jhowe@codeaurora.org>
Date: Tue Apr 12 14:48:51 2011 -0400
hw_random: Use memory barriers
Change-Id: Ie216141d7f6997266d8c5ed4bbd436f1be6551b8
Signed-off-by: John Howe <jhowe@codeaurora.org>
commit f07f1ba547790155db4c508ccfa58b64c967fe8e
Author: Raj Kushwaha <rajk@codeaurora.org>
Date: Tue Jul 26 14:35:28 2011 -0700
hw_random: msm: Remove PRNG hardware configuration
LSFR and CONFIG registers are configured by secure domain
code and XPU protected.
CRs-Fixed: 284133
Signed-off-by: Mona Hossain <mhossain@codeaurora.org>
(cherry picked from commit a4f802b0f5d0faee9e83020c599b2f4b0b27de5f)
Change-Id: Ie73cc3a95d1e2fff970e4d71f15fc1cbb4ead11c
Signed-off-by: Raj Kushwaha <rajk@codeaurora.org>
commit 26cef0c9d572e55df0f17dc4a5de380595eddaeb
Author: Matt Wagantall <mattw@codeaurora.org>
Date: Thu Aug 11 17:19:31 2011 -0700
msm: clock: Use device names to distinguish between PRNG clocks
Drivers should now use their device names to distinguish between
clocks of the same type rather than the clock name. This allows
the clock names to be updated to match the new naming convention.
Change-Id: Ibf00fd3d406adb04299e3e79e379d4fefe70f2b4
Signed-off-by: Matt Wagantall <mattw@codeaurora.org>
commit 5ad373931744ae98289ec680334d7cc0bee1c0b6
Author: Ramesh Masavarapu <rameshm@codeaurora.org>
Date: Mon Oct 10 10:44:10 2011 -0700
msm: Add PRNG to MSM9615 device.
Add configuration parameters for MSM9615 device.
PRNG hardware registers initialization in msm_rng.c is done
currently for MSM9615.
Change-Id: I2a05e9e582ce94a25bec71e1acaee95d62cd9469
Signed-off-by: Ramesh Masavarapu <rameshm@codeaurora.org>
commit 2f963dbc78c6c0703f51466b2b242287a2df5487
Author: Ramesh Masavarapu <rameshm@codeaurora.org>
Date: Thu Oct 20 15:33:50 2011 -0700
msm: Removed target specific changes for enabling PRNG h/w.
The driver checks if the PRNG h/w is enabled. If it is not ON, it
enables the PRNG h/w.
Change-Id: I7c73eba7ba47f4fca116cfe0884758e6dd130ed0
Signed-off-by: Ramesh Masavarapu <rameshm@codeaurora.org>
commit 46af59fb8f4bce302ad4d787b63b25e46548df6a
Author: Stepan Moskovchenko <stepanm@codeaurora.org>
Date: Tue Feb 7 14:38:59 2012 -0800
msm: rng: Disable RNG init on APQ8064
Change-Id: Ic42a85c51faea8a17b02eb4987d0f5db732716c2
Signed-off-by: Stepan Moskovchenko <stepanm@codeaurora.org>
commit a54263b0056b15cad1336a33d57bb1db013e8abb
Author: Ramesh Masavarapu <rameshm@codeaurora.org>
Date: Wed Feb 1 22:49:01 2012 -0800
msm: Removed XPU violations.
During initialization, there is a violation in writing to
"read only" registers for targets that support trust zone.
Trustzone marks certain registers as read-only.
This change fixes the issue by writing to registers only
on targets that do not support trust zone.
Change-Id: I69bb0f1bad199201aa3dd8b378ca1683dfa81c86
Signed-off-by: Ramesh Masavarapu <rameshm@codeaurora.org>
commit a99fcc24e94481134ca22f9778e88ed31646d6e3
Author: Ramesh Masavarapu <rameshm@codeaurora.org>
Date: Wed Feb 22 14:30:32 2012 -0800
Revert "msm: rng: Disable RNG init on APQ8064"
This reverts commit 46af59fb8f4bce302ad4d787b63b25e46548df6a.
The RNG driver was initially disabled because of missing clock
changes and this driver was causing boot up issues.
Now with the clock changes checked in the RNG driver works.
Change-Id: I127f25c8be6b715510c1fb16b274a814416d8a8a
Signed-off-by: Ramesh Masavarapu <rameshm@codeaurora.org>
commit 801c392ab9ee2893c6f3ca506e43afa62798890b
Author: Ramesh Masavarapu <rameshm@codeaurora.org>
Date: Tue Apr 24 16:28:00 2012 -0700
prng: Replace clk_enable and clk_disable APIs.
The clk driver has introduced new clock APIs that replace
the existing clk_enable and clk_disable.
-clk_enable() APIs is replaced with clk_prepare_enable().
-clk_disable() API is replaced with clk_disable_unprepare().
Change-Id: Ib6c452e7dc3f357497eae5a9302a7352a19fcb18
Signed-off-by: Ramesh Masavarapu <rameshm@codeaurora.org>
commit de991f08a8738dc66e65488aebed472de65ce237
Author: Hariprasad Dhalinarasimha <hnamgund@codeaurora.org>
Date: Thu May 31 13:15:51 2012 -0700
PRNG: Device tree entry for qrng device.
Cleanup platorm device entry & add device tree entry
Change-Id: I5bde944d63276a3aaf00b7415066963027f11249
Signed-off-by: Hariprasad Dhalinarasimha <hnamgund@codeaurora.org>
commit a4100a4a6e2a1843645d3eff22dabb387d4cbb61
Author: Stephen Boyd <sboyd@codeaurora.org>
Date: Mon Jun 25 15:48:37 2012 -0700
msm-rng: Fix PRNG_LFSR_CFG setup
Changes to only configure the LFSR on devices that don't have the
prng hardware already setup mistakenly removed the LFSR
configuration. Instead, the change is ORing in 1s into the top 16
bits of the register (they're marked as reserved).
Restore the original code by masking off the lower 16 bits of the
register and filling them with values from the
PRNG_LFSR_CFG_CLOCKS define.
Change-Id: Idd0df7b49175c211eec5ea778733ae81f5bc8188
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
commit 0bef6ede4b779c19091234e20ecfbb76a44edac0
Author: Hariprasad Dhalinarasimha <hnamgund@codeaurora.org>
Date: Wed Nov 7 19:47:21 2012 -0800
msm: rng: Add support for iface clk
Currently the driver supports only enabling core_clk,but on
certain targets, iface_clk is used for the hardware RNG
block. This fix adds compatibility to targets that have iface
clock instead of the core clock.
Change-Id: I480c3c7070e09f945439ea48e6877c7170ceeeb9
Signed-off-by: Hariprasad Dhalinarasimha <hnamgund@codeaurora.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
There is no longer a SPIN_LOCK_UNLOCKED macro; replace it with
__SPIN_LOCK_UNLOCKED so that lockdep can give the lock a name.
Also include spinlock.h so that this compiles.
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
If a port was open before going into one of the sleep states, the port
can continue normal operation after restore. However, the host has to
be told that the guest side of the connection is open to restore
pre-suspend state.
This wasn't noticed so far due to a bug in qemu that was fixed recently
(which marked the guest-side connection as always open).
CC: stable@vger.kernel.org # Only for 3.3
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Pull tty and serial fixes from Greg KH:
"Here are some tty and serial fixes for 3.4-rc2.
Most important here is the pl011 fix, which has been reported by about
100 different people, which means more people use it than I expected
:)
There are also some 8250 driver reverts due to some problems reported
by them. And other minor fixes as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"
* tag 'tty-3.4-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
pch_uart: Add Kontron COMe-mTT10 uart clock quirk
pch_uart: Fix MSI setting issue
serial/8250_pci: add a "force background timer" flag and use it for the "kt" serial port
Revert "serial/8250_pci: setup-quirk workaround for the kt serial controller"
Revert "serial/8250_pci: init-quirk msi support for kt serial controller"
tty/serial/omap: console can only be built-in
serial: samsung: fix omission initialize ulcon in reset port fn()
printk(): add KERN_CONT where needed in hpet and vt code
tty/serial: atmel_serial: fix RS485 half-duplex problem
tty: serial: altera_uart: Check for NULL platform_data in probe.
isdn/gigaset: use gig_dbg() for debugging output
omap-serial: Fix the error handling in the omap_serial probe
serial: PL011: move interrupt clearing
/proc/sys/kernel/random/boot_id can be read concurrently by userspace
processes. If two (or more) user-space processes concurrently read
boot_id when sysctl_bootid is not yet assigned, a race can occur making
boot_id differ between the reads. Because the whole point of the boot id
is to be unique across a kernel execution, fix this by protecting this
operation with a spinlock.
Given that this operation is not frequently used, hitting the spinlock
on each call should not be an issue.
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Matt Mackall <mpm@selenic.com>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Greg Kroah-Hartman <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
A prototype for kmsg records instead of a byte-stream buffer revealed
a couple of missing printk(KERN_CONT ...) uses. Subsequent calls produce
one record per printk() call, while all should have ended up in a single
record.
Instead of:
ACPI: (supports S0 S5)
ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11)
hpet0: at MMIO 0xfed00000, IRQs 2 , 8 , 0
It prints:
ACPI: (supports S0
S5
)
ACPI: PCI Interrupt Link [LNKA] (IRQs
5
*10
11
)
hpet0: at MMIO 0xfed00000, IRQs
2
, 8
, 0
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Len Brown <lenb@kernel.org>
Signed-off-by: Kay Sievers <kay@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pull arch/tile bug fixes from Chris Metcalf:
"This includes Paul Gortmaker's change to fix the <asm/system.h>
disintegration issues on tile, a fix to unbreak the tilepro ethernet
driver, and a backlog of bugfix-only changes from internal Tilera
development over the last few months.
They have all been to LKML and on linux-next for the last few days.
The EDAC change to MAINTAINERS is an oddity but discussion on the
linux-edac list suggested I ask you to pull that change through my
tree since they don't have a tree to pull edac changes from at the
moment."
* 'stable' of git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile: (39 commits)
drivers/net/ethernet/tile: fix netdev_alloc_skb() bombing
MAINTAINERS: update EDAC information
tilepro ethernet driver: fix a few minor issues
tile-srom.c driver: minor code cleanup
edac: say "TILEGx" not "TILEPro" for the tilegx edac driver
arch/tile: avoid accidentally unmasking NMI-type interrupt accidentally
arch/tile: remove bogus performance optimization
arch/tile: return SIGBUS for addresses that are unaligned AND invalid
arch/tile: fix finv_buffer_remote() for tilegx
arch/tile: use atomic exchange in arch_write_unlock()
arch/tile: stop mentioning the "kvm" subdirectory
arch/tile: export the page_home() function.
arch/tile: fix pointer cast in cacheflush.c
arch/tile: fix single-stepping over swint1 instructions on tilegx
arch/tile: implement panic_smp_self_stop()
arch/tile: add "nop" after "nap" to help GX idle power draw
arch/tile: use proper memparse() for "maxmem" options
arch/tile: fix up locking in pgtable.c slightly
arch/tile: don't leak kernel memory when we unload modules
arch/tile: fix bug in delay_backoff()
...
Pull an APM fix from Jiri Kosina:
"One deadlock/race fix from Niel that got introduced when we were
moving away from freezer_*_count() to wait_event_freezable()."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/apm:
APM: fix deadlock in APM_IOC_SUSPEND ioctl
Merge batch of fixes from Andrew Morton:
"The simple_open() cleanup was held back while I wanted for laggards to
merge things.
I still need to send a few checkpoint/restore patches. I've been
wobbly about merging them because I'm wobbly about the overall
prospects for success of the project. But after speaking with Pavel
at the LSF conference, it sounds like they're further toward
completion than I feared - apparently davem is at the "has stopped
complaining" stage regarding the net changes. So I need to go back
and re-review those patchs and their (lengthy) discussion."
* emailed from Andrew Morton <akpm@linux-foundation.org>: (16 patches)
memcg swap: use mem_cgroup_uncharge_swap fix
backlight: add driver for DA9052/53 PMIC v1
C6X: use set_current_blocked() and block_sigmask()
MAINTAINERS: add entry for sparse checker
MAINTAINERS: fix REMOTEPROC F: typo
alpha: use set_current_blocked() and block_sigmask()
simple_open: automatically convert to simple_open()
scripts/coccinelle/api/simple_open.cocci: semantic patch for simple_open()
libfs: add simple_open()
hugetlbfs: remove unregister_filesystem() when initializing module
drivers/rtc/rtc-88pm860x.c: fix rtc irq enable callback
fs/xattr.c:setxattr(): improve handling of allocation failures
fs/xattr.c:listxattr(): fall back to vmalloc() if kmalloc() failed
fs/xattr.c: suppress page allocation failure warnings from sys_listxattr()
sysrq: use SEND_SIG_FORCED instead of force_sig()
proc: fix mount -t proc -o AAA
Many users of debugfs copy the implementation of default_open() when
they want to support a custom read/write function op. This leads to a
proliferation of the default_open() implementation across the entire
tree.
Now that the common implementation has been consolidated into libfs we
can replace all the users of this function with simple_open().
This replacement was done with the following semantic patch:
<smpl>
@ open @
identifier open_f != simple_open;
identifier i, f;
@@
-int open_f(struct inode *i, struct file *f)
-{
(
-if (i->i_private)
-f->private_data = i->i_private;
|
-f->private_data = i->i_private;
)
-return 0;
-}
@ has_open depends on open @
identifier fops;
identifier open.open_f;
@@
struct file_operations fops = {
...
-.open = open_f,
+.open = simple_open,
...
};
</smpl>
[akpm@linux-foundation.org: checkpatch fixes]
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Julia Lawall <Julia.Lawall@lip6.fr>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
I found the Xorg server on my ARM device stuck in the 'msleep()' loop
in apm_ioctl.
I suspect it had attempted suspend immediately after resuming and lost
a race.
During that msleep(10);, a new suspend cycle must have started and
changed ->suspend_state to SUSPEND_PENDING, so it was never seen to
be SUSPEND_DONE and the loop could never exited. It would have moved on
to SUSPEND_ACKTO but never been able to reach SUSPEND_DONE.
So change the loop to only run while SUSPEND_ACKED rather than until
SUSPEND_DONE. This is much safer.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This adds PCI ID for IVB GT2 server variant which we were missing.
Signed-off-by: Eugeni Dodonov <eugeni.dodonov@intel.com>
[danvet: fix up conflict because the patch has been diffed against next. tsk.]
Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Pull x32 support for x86-64 from Ingo Molnar:
"This tree introduces the X32 binary format and execution mode for x86:
32-bit data space binaries using 64-bit instructions and 64-bit kernel
syscalls.
This allows applications whose working set fits into a 32 bits address
space to make use of 64-bit instructions while using a 32-bit address
space with shorter pointers, more compressed data structures, etc."
Fix up trivial context conflicts in arch/x86/{Kconfig,vdso/vma.c}
* 'x86-x32-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (71 commits)
x32: Fix alignment fail in struct compat_siginfo
x32: Fix stupid ia32/x32 inversion in the siginfo format
x32: Add ptrace for x32
x32: Switch to a 64-bit clock_t
x32: Provide separate is_ia32_task() and is_x32_task() predicates
x86, mtrr: Use explicit sizing and padding for the 64-bit ioctls
x86/x32: Fix the binutils auto-detect
x32: Warn and disable rather than error if binutils too old
x32: Only clear TIF_X32 flag once
x32: Make sure TS_COMPAT is cleared for x32 tasks
fs: Remove missed ->fds_bits from cessation use of fd_set structs internally
fs: Fix close_on_exec pointer in alloc_fdtable
x32: Drop non-__vdso weak symbols from the x32 VDSO
x32: Fix coding style violations in the x32 VDSO code
x32: Add x32 VDSO support
x32: Allow x32 to be configured
x32: If configured, add x32 system calls to system call tables
x32: Handle process creation
x32: Signal-related system calls
x86: Add #ifdef CONFIG_COMPAT to <asm/sys_ia32.h>
...
Merge third batch of patches from Andrew Morton:
- Some MM stragglers
- core SMP library cleanups (on_each_cpu_mask)
- Some IPI optimisations
- kexec
- kdump
- IPMI
- the radix-tree iterator work
- various other misc bits.
"That'll do for -rc1. I still have ~10 patches for 3.4, will send
those along when they've baked a little more."
* emailed from Andrew Morton <akpm@linux-foundation.org>: (35 commits)
backlight: fix typo in tosa_lcd.c
crc32: add help text for the algorithm select option
mm: move hugepage test examples to tools/testing/selftests/vm
mm: move slabinfo.c to tools/vm
mm: move page-types.c from Documentation to tools/vm
selftests/Makefile: make `run_tests' depend on `all'
selftests: launch individual selftests from the main Makefile
radix-tree: use iterators in find_get_pages* functions
radix-tree: rewrite gang lookup using iterator
radix-tree: introduce bit-optimized iterator
fs/proc/namespaces.c: prevent crash when ns_entries[] is empty
nbd: rename the nbd_device variable from lo to nbd
pidns: add reboot_pid_ns() to handle the reboot syscall
sysctl: use bitmap library functions
ipmi: use locks on watchdog timeout set on reboot
ipmi: simplify locking
ipmi: fix message handling during panics
ipmi: use a tasklet for handling received messages
ipmi: increase KCS timeouts
ipmi: decrease the IPMI message transaction time in interrupt mode
...
The IPMI watchdog timer clears or extends the timer on reboot/shutdown.
It was using the non-locking routine for setting the watchdog timer, but
this was causing race conditions. Instead, use the locking version to
avoid the races. It seems to work fine.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Now that the the IPMI driver is using a tasklet, we can simplify the
locking in the driver and get rid of the message lock.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The part of the IPMI driver that delivered panic information to the event
log and extended the watchdog timeout during a panic was not properly
handling the messages. It used static messages to avoid allocation, but
wasn't properly waiting for these, or wasn't properly handling the
refcounts.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The IPMI driver would release a lock, deliver a message, then relock.
This is obviously ugly, and this patch converts the message handler
interface to use a tasklet to schedule work. This lets the receive
handler be called from an interrupt handler with interrupts enabled.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We currently time out and retry KCS transactions after 1 second of waiting
for IBF or OBF. This appears to be too short for some hardware. The IPMI
spec says "All system software wait loops should include error timeouts.
For simplicity, such timeouts are not shown explicitly in the flow
diagrams. A five-second timeout or greater is recommended". Change the
timeout to five seconds to satisfy the slow hardware.
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Call the event handler immediately after starting the next message.
This change considerably decreases the IPMI transaction time (cuts off
~9ms for a single ipmitool transaction).
Signed-off-by: Srinivas_Gowda <srinivas_g_gowda@dell.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull "Disintegrate and delete asm/system.h" from David Howells:
"Here are a bunch of patches to disintegrate asm/system.h into a set of
separate bits to relieve the problem of circular inclusion
dependencies.
I've built all the working defconfigs from all the arches that I can
and made sure that they don't break.
The reason for these patches is that I recently encountered a circular
dependency problem that came about when I produced some patches to
optimise get_order() by rewriting it to use ilog2().
This uses bitops - and on the SH arch asm/bitops.h drags in
asm-generic/get_order.h by a circuituous route involving asm/system.h.
The main difficulty seems to be asm/system.h. It holds a number of
low level bits with no/few dependencies that are commonly used (eg.
memory barriers) and a number of bits with more dependencies that
aren't used in many places (eg. switch_to()).
These patches break asm/system.h up into the following core pieces:
(1) asm/barrier.h
Move memory barriers here. This already done for MIPS and Alpha.
(2) asm/switch_to.h
Move switch_to() and related stuff here.
(3) asm/exec.h
Move arch_align_stack() here. Other process execution related bits
could perhaps go here from asm/processor.h.
(4) asm/cmpxchg.h
Move xchg() and cmpxchg() here as they're full word atomic ops and
frequently used by atomic_xchg() and atomic_cmpxchg().
(5) asm/bug.h
Move die() and related bits.
(6) asm/auxvec.h
Move AT_VECTOR_SIZE_ARCH here.
Other arch headers are created as needed on a per-arch basis."
Fixed up some conflicts from other header file cleanups and moving code
around that has happened in the meantime, so David's testing is somewhat
weakened by that. We'll find out anything that got broken and fix it..
* tag 'split-asm_system_h-for-linus-20120328' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-asm_system: (38 commits)
Delete all instances of asm/system.h
Remove all #inclusions of asm/system.h
Add #includes needed to permit the removal of asm/system.h
Move all declarations of free_initmem() to linux/mm.h
Disintegrate asm/system.h for OpenRISC
Split arch_align_stack() out from asm-generic/system.h
Split the switch_to() wrapper out of asm-generic/system.h
Move the asm-generic/system.h xchg() implementation to asm-generic/cmpxchg.h
Create asm-generic/barrier.h
Make asm-generic/cmpxchg.h #include asm-generic/cmpxchg-local.h
Disintegrate asm/system.h for Xtensa
Disintegrate asm/system.h for Unicore32 [based on ver #3, changed by gxt]
Disintegrate asm/system.h for Tile
Disintegrate asm/system.h for Sparc
Disintegrate asm/system.h for SH
Disintegrate asm/system.h for Score
Disintegrate asm/system.h for S390
Disintegrate asm/system.h for PowerPC
Disintegrate asm/system.h for PA-RISC
Disintegrate asm/system.h for MN10300
...
Pull watchdog updates from Wim Van Sebroeck:
- Removal of the Documentation/watchdog/00-INDEX file
- Fix boot status reporting for imx2_wdt
- clean-up sp805_wdt, pnx4008_wdt and mpcore_wdt
- convert printk in watchdog drivers to pr_ functions
- change nowayout module parameter to bool for every watchdog device
- conversion of jz4740_wdt, pnx4008_wdt, max63xx_wdt, softdog,
ep93xx_wdt, coh901327 and txx9wdt to new watchdog API
- Add support for the WDIOC_GETTIMELEFT ioctl call to the new watchdog
API
- Change the new watchdog API so that the driver updates the timeout
value
- two fixes for the xen_wdt driver
Fix up conflicts in ep93xx driver due to the same patches being merged
through separate branches.
* git://www.linux-watchdog.org/linux-watchdog: (33 commits)
watchdog: txx9wdt: fix timeout
watchdog: Convert txx9wdt driver to watchdog framework
watchdog: coh901327_wdt.c: fix timeout
watchdog: coh901327: convert to use watchdog core
watchdog: Add support for WDIOC_GETTIMELEFT IOCTL in watchdog core
watchdog: ep93xx_wdt: timeout is an unsigned int value.
watchdog: ep93xx_wdt: Fix timeout after conversion to watchdog core
watchdog: Convert ep93xx driver to watchdog core
watchdog: sp805: Use devm routines
watchdog: sp805: replace readl/writel with lighter _relaxed variants
watchdog: sp805: Fix documentation style comment
watchdog: mpcore_wdt: Allow platform_get_irq() to fail
watchdog: mpcore_wdt: Use devm routines
watchdog: mpcore_wdt: Rename dev to pdev for pointing to struct platform_device
watchdog: xen: don't clear is_active when xen_wdt_stop() failed
watchdog: xen: don't unconditionally enable the watchdog during resume
watchdog: fix compiler error for missing parenthesis
watchdog: ep93xx_wdt.c: fix platform probe
watchdog: ep93xx: Convert the watchdog driver into a platform device.
watchdog: fix set_timeout operations
...
Remove all #inclusions of asm/system.h preparatory to splitting and killing
it. Performed with the following command:
perl -p -i -e 's!^#\s*include\s*<asm/system[.]h>.*\n!!' `grep -Irl '^#\s*include\s*<asm/system[.]h>' *`
Signed-off-by: David Howells <dhowells@redhat.com>
Pull "ARM: global cleanups" from Arnd Bergmann:
"Quite a bit of code gets removed, and some stuff moved around, mostly
the old samsung s3c24xx stuff. There should be no functional changes
in this series otherwise. Some cleanups have dependencies on other
arm-soc branches and will be sent in the second round.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>"
Fixed up trivial conflicts mainly due to #include's being changes on
both sides.
* tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (121 commits)
ep93xx: Remove unnecessary includes of ep93xx-regs.h
ep93xx: Move EP93XX_SYSCON defines to SoC private header
ep93xx: Move crunch code to mach-ep93xx directory
ep93xx: Make syscon access functions private to SoC
ep93xx: Configure GPIO ports in core code
ep93xx: Move peripheral defines to local SoC header
ep93xx: Convert the watchdog driver into a platform device.
ep93xx: Use ioremap for backlight driver
ep93xx: Move GPIO defines to gpio-ep93xx.h
ep93xx: Don't use system controller defines in audio drivers
ep93xx: Move PHYS_BASE defines to local SoC header file
ARM: EXYNOS: Add clock register addresses for EXYNOS4X12 bus devfreq driver
ARM: EXYNOS: add clock registers for exynos4x12-cpufreq
PM / devfreq: update the name of EXYNOS clock registers that were omitted
PM / devfreq: update the name of EXYNOS clock register
ARM: EXYNOS: change the prefix S5P_ to EXYNOS4_ for clock
ARM: EXYNOS: use static declaration on regarding clock
ARM: EXYNOS: replace clock.c for other new EXYNOS SoCs
ARM: OMAP2+: Fix build error after merge
ARM: S3C24XX: remove call to s3c24xx_setup_clocks
...
Pull #2 ARM updates from Russell King:
"Further ARM AMBA primecell updates which aren't included directly in
the previous commit. I wanted to keep these separate as they're
touching stuff outside arch/arm/."
* 'amba' of git://git.linaro.org/people/rmk/linux-arm:
ARM: 7362/1: AMBA: Add module_amba_driver() helper macro for amba_driver
ARM: 7335/1: mach-u300: do away with MMC config files
ARM: 7280/1: mmc: mmci: Cache MMCICLOCK and MMCIPOWER register
ARM: 7309/1: realview: fix unconnected interrupts on EB11MP
ARM: 7230/1: mmc: mmci: Fix PIO read for small SDIO packets
ARM: 7227/1: mmc: mmci: Prepare for SDIO before setting up DMA job
ARM: 7223/1: mmc: mmci: Fixup use of runtime PM and use autosuspend
ARM: 7221/1: mmc: mmci: Change from using legacy suspend
ARM: 7219/1: mmc: mmci: Change vdd_handler to a generic ios_handler
ARM: 7218/1: mmc: mmci: Provide option to configure bus signal direction
ARM: 7217/1: mmc: mmci: Put power register deviations in variant data
ARM: 7216/1: mmc: mmci: Do not release spinlock in request_end
ARM: 7215/1: mmc: mmci: Increase max_segs from 16 to 128
Pull drm main changes from Dave Airlie:
"This is the main drm pull request, I'm probably going to send two more
smaller ones, will explain below.
This contains a patch that is also in the fbdev tree, but it should be
the same patch, it added an API for hot unplugging framebuffer
devices, and I need that API for a new driver.
It also contains some changes to the i2c tree which Jean has acked,
and one change to moorestown platform stuff in x86.
Highlights:
- new drivers: UDL driver for USB displaylink devices, kms only,
should support correct hotplug operations.
- core: i2c speedups + better hotplug support, EDID overriding via
firmware interface - allows user to load a firmware for a broken
monitor/kvm from userspace, it even has documentation for it.
- exynos: new HDMI audio + hdmi 1.4 + virtual output driver
- gma500: code cleanup
- radeon: cleanups, CS optimisations, streamout support and pageflip
fix
- nouveau: NVD9 displayport support + more reclocking work
- i915: re-enabling GMBUS, finish gpu patch (might help hibernation
who knows), missed irq fixes, stencil tiling fixes, interlaced
support, aliasesd PPGTT support for SNB/IVB, swizzling for SNB/IVB,
semaphore fixes
As well as the usual bunch of cleanups and fixes all over the place.
I've got two things I'd like to merge a bit later:
a) AMD support for all their new radeonhd 7000 series GPU and APUs.
AMD dropped this a bit late due to insane internal review
processes, (please AMD just follow Intel and let open source guys
ship stuff early) however I don't want to penalise people who own
this hardware (since its been on sale for 3-4 months and GPU hw
doesn't exactly have a lifetime in years) and consign them to
using closed drivers for longer than necessary. The changes are
well contained and just plug into the driver new gpu functionality
so they should be fairly regression proof. I just want to give
them a bit of a run on the hw AMD kindly sent me.
b) drm prime/dma-buf interface code. This is just infrastructure
code to expose the dma-buf stuff to drm drivers and to userspace.
I'm not planning on pushing any driver support in this cycle
(except maybe exynos), but I'd like to get the infrastructure code
in so for the next cycle I can start getting the driver support
into the individual drivers. We have started driver support for
i915, nouveau and udl along with I think exynos and omap in
staging. However this code relies on the dma-buf tree being
pulled into your tree first since it needs the latest interfaces
from that tree. I'll push to get that tree sent asap.
(oh and any warnings you see in i915 are gcc's fault from what anyone
can see)."
Fix up trivial conflicts in arch/x86/platform/mrst/mrst.c due to the new
msic_thermal_platform_data() thermal function being added next to the
tc35876x_platform_data() i2c device function..
* 'drm-next' of git://people.freedesktop.org/~airlied/linux: (326 commits)
drm/i915: use DDC_ADDR instead of hard-coding it
drm/radeon: use DDC_ADDR instead of hard-coding it
drm: remove unneeded redefinition of DDC_ADDR
drm/exynos: added virtual display driver.
drm: allow loading an EDID as firmware to override broken monitor
drm/exynos: enable hdmi audio feature
drm/exynos: add default pixel format for plane
drm/exynos: cleanup exynos_hdmi.h
drm/exynos: add is_local member in exynos_drm_subdrv struct
drm/exynos: add subdrv open/close functions
drm/exynos: remove module of exynos drm subdrv
drm/exynos: release pending pageflip events when closed
drm/exynos: added new funtion to get/put dma address.
drm/exynos: update gem and buffer framework.
drm/exynos: added mode_fixup feature and code clean.
drm/exynos: add HDMI version 1.4 support
drm/exynos: remove exynos_mixer.h
gma500: Fix mmap frambuffer
drm/radeon: Drop radeon_gem_object_(un)pin.
drm/radeon: Restrict offset for legacy display engine.
...
Pull powerpc merge from Benjamin Herrenschmidt:
"Here's the powerpc batch for this merge window. It is going to be a
bit more nasty than usual as in touching things outside of
arch/powerpc mostly due to the big iSeriesectomy :-) We finally got
rid of the bugger (legacy iSeries support) which was a PITA to
maintain and that nobody really used anymore.
Here are some of the highlights:
- Legacy iSeries is gone. Thanks Stephen ! There's still some bits
and pieces remaining if you do a grep -ir series arch/powerpc but
they are harmless and will be removed in the next few weeks
hopefully.
- The 'fadump' functionality (Firmware Assisted Dump) replaces the
previous (equivalent) "pHyp assisted dump"... it's a rewrite of a
mechanism to get the hypervisor to do crash dumps on pSeries, the
new implementation hopefully being much more reliable. Thanks
Mahesh Salgaonkar.
- The "EEH" code (pSeries PCI error handling & recovery) got a big
spring cleaning, motivated by the need to be able to implement a
new backend for it on top of some new different type of firwmare.
The work isn't complete yet, but a good chunk of the cleanups is
there. Note that this adds a field to struct device_node which is
not very nice and which Grant objects to. I will have a patch soon
that moves that to a powerpc private data structure (hopefully
before rc1) and we'll improve things further later on (hopefully
getting rid of the need for that pointer completely). Thanks Gavin
Shan.
- I dug into our exception & interrupt handling code to improve the
way we do lazy interrupt handling (and make it work properly with
"edge" triggered interrupt sources), and while at it found & fixed
a wagon of issues in those areas, including adding support for page
fault retry & fatal signals on page faults.
- Your usual random batch of small fixes & updates, including a bunch
of new embedded boards, both Freescale and APM based ones, etc..."
I fixed up some conflicts with the generalized irq-domain changes from
Grant Likely, hopefully correctly.
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (141 commits)
powerpc/ps3: Do not adjust the wrapper load address
powerpc: Remove the rest of the legacy iSeries include files
powerpc: Remove the remaining CONFIG_PPC_ISERIES pieces
init: Remove CONFIG_PPC_ISERIES
powerpc: Remove FW_FEATURE ISERIES from arch code
tty/hvc_vio: FW_FEATURE_ISERIES is no longer selectable
powerpc/spufs: Fix double unlocks
powerpc/5200: convert mpc5200 to use of_platform_populate()
powerpc/mpc5200: add options to mpc5200_defconfig
powerpc/mpc52xx: add a4m072 board support
powerpc/mpc5200: update mpc5200_defconfig to fit for charon board
Documentation/powerpc/mpc52xx.txt: Checkpatch cleanup
powerpc/44x: Add additional device support for APM821xx SoC and Bluestone board
powerpc/44x: Add support PCI-E for APM821xx SoC and Bluestone board
MAINTAINERS: Update PowerPC 4xx tree
powerpc/44x: The bug fixed support for APM821xx SoC and Bluestone board
powerpc: document the FSL MPIC message register binding
powerpc: add support for MPIC message register API
powerpc/fsl: Added aliased MSIIR register address to MSI node in dts
powerpc/85xx: mpc8548cds - add 36-bit dts
...
Pull security subsystem updates for 3.4 from James Morris:
"The main addition here is the new Yama security module from Kees Cook,
which was discussed at the Linux Security Summit last year. Its
purpose is to collect miscellaneous DAC security enhancements in one
place. This also marks a departure in policy for LSM modules, which
were previously limited to being standalone access control systems.
Chromium OS is using Yama, and I believe there are plans for Ubuntu,
at least.
This patchset also includes maintenance updates for AppArmor, TOMOYO
and others."
Fix trivial conflict in <net/sock.h> due to the jumo_label->static_key
rename.
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (38 commits)
AppArmor: Fix location of const qualifier on generated string tables
TOMOYO: Return error if fails to delete a domain
AppArmor: add const qualifiers to string arrays
AppArmor: Add ability to load extended policy
TOMOYO: Return appropriate value to poll().
AppArmor: Move path failure information into aa_get_name and rename
AppArmor: Update dfa matching routines.
AppArmor: Minor cleanup of d_namespace_path to consolidate error handling
AppArmor: Retrieve the dentry_path for error reporting when path lookup fails
AppArmor: Add const qualifiers to generated string tables
AppArmor: Fix oops in policy unpack auditing
AppArmor: Fix error returned when a path lookup is disconnected
KEYS: testing wrong bit for KEY_FLAG_REVOKED
TOMOYO: Fix mount flags checking order.
security: fix ima kconfig warning
AppArmor: Fix the error case for chroot relative path name lookup
AppArmor: fix mapping of META_READ to audit and quiet flags
AppArmor: Fix underflow in xindex calculation
AppArmor: Fix dropping of allowed operations that are force audited
AppArmor: Add mising end of structure test to caps unpacking
...
Pull trivial tree from Jiri Kosina:
"It's indeed trivial -- mostly documentation updates and a bunch of
typo fixes from Masanari.
There are also several linux/version.h include removals from Jesper."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (101 commits)
kcore: fix spelling in read_kcore() comment
constify struct pci_dev * in obvious cases
Revert "char: Fix typo in viotape.c"
init: fix wording error in mm_init comment
usb: gadget: Kconfig: fix typo for 'different'
Revert "power, max8998: Include linux/module.h just once in drivers/power/max8998_charger.c"
writeback: fix fn name in writeback_inodes_sb_nr_if_idle() comment header
writeback: fix typo in the writeback_control comment
Documentation: Fix multiple typo in Documentation
tpm_tis: fix tis_lock with respect to RCU
Revert "media: Fix typo in mixer_drv.c and hdmi_drv.c"
Doc: Update numastat.txt
qla4xxx: Add missing spaces to error messages
compiler.h: Fix typo
security: struct security_operations kerneldoc fix
Documentation: broken URL in libata.tmpl
Documentation: broken URL in filesystems.tmpl
mtd: simplify return logic in do_map_probe()
mm: fix comment typo of truncate_inode_pages_range
power: bq27x00: Fix typos in comment
...
Pull TTY/serial patches from Greg KH:
"tty and serial merge for 3.4-rc1
Here's the big serial and tty merge for the 3.4-rc1 tree.
There's loads of fixes and reworks in here from Jiri for the tty
layer, and a number of patches from Alan to help try to wrestle the vt
layer into a sane model.
Other than that, lots of driver updates and fixes, and other minor
stuff, all detailed in the shortlog."
* tag 'tty-3.3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (132 commits)
serial: pxa: add clk_prepare/clk_unprepare calls
TTY: Wrong unicode value copied in con_set_unimap()
serial: PL011: clear pending interrupts
serial: bfin-uart: Don't access tty circular buffer in TX DMA interrupt after it is reset.
vt: NULL dereference in vt_do_kdsk_ioctl()
tty: serial: vt8500: fix annotations for probe/remove
serial: remove back and forth conversions in serial_out_sync
serial: use serial_port_in/out vs serial_in/out in 8250
serial: introduce generic port in/out helpers
serial: reduce number of indirections in 8250 code
serial: delete useless void casts in 8250.c
serial: make 8250's serial_in shareable to other drivers.
serial: delete last unused traces of pausing I/O in 8250
pch_uart: Add module parameter descriptions
pch_uart: Use existing default_baud in setup_console
pch_uart: Add user_uartclk parameter
pch_uart: Add Fish River Island II uart clock quirks
pch_uart: Use uartclk instead of base_baud
mpc5200b/uart: select more tolerant uart prescaler on low baudrates
tty: moxa: fix bit test in moxa_start()
...
Pull char and misc patches for 3.4-rc1 from Greg KH:
"Not much here, just a few minor fixes and some conversions to the
module_*_driver() functions, making the codebase smaller."
* tag 'char-misc-3.3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
misc: bmp085: Use unsigned long to store jiffies
char/ramoops: included linux/err.h twice
misc: bmp085: Handle jiffies overflow correctly
misc: fsa9480: Remove obsolete cleanup for clientdata
char: Fix typo in tlclk.c
char: Fix typo in viotape.c
cs5535-mfgpt: don't call __init function from __devinit
MISC: convert drivers/misc/* to use module_spi_driver()
MISC: convert drivers/misc/* to use module_i2c_driver()
MISC: convert drivers/misc/* to use module_platform_driver()
For simple modules that contain a single amba_driver without any
additional setup code then ends up being a block of duplicated
boilerplate. This patch adds a new macro, module_amba_driver(),
which replaces the module_init()/module_exit() registrations with
template functions.
Signed-off-by: Viresh Kumar <viresh.kumar@st.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
This reverts commit a7ccf37752.
It changes deprecated code that is being removed in powerpc tree.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
These drivers are specific to the PowerPC legacy iSeries platform and
their Kconfig is specified in arch/powerpc. Legacy iSeries is being
removed, so these drivers can no longer be selected.
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
