This repository has been archived on 2026-03-14. You can view files and clone it, but cannot push or open issues or pull requests.
Files
ubports_kernel_google_msm/drivers/usb
Pavankumar Kondeti 9e498b8333 EHCI: HSIC: Fail root hub bus suspend when port is not enabled
HSIC controller can not detect HSIC device in low power mode.  Hence
controller suspend is allowed only when port is enabled.  But this
check is done in controller suspend routine.  Controller suspend is
attempted after root hub bus is suspended.  Even if we fail, controller
suspend, root hub bus remains in suspend state.  This would delay
the enumeration of HSIC device as root hub bus resume takes some time.

CRs-Fixed: 396444
Signed-off-by: Pavankumar Kondeti <pkondeti@codeaurora.org>
(cherry picked from commit a723f744025854c7132410fd1699bc0997617fb9)

Change-Id: I30c2117a0a6debfbc98a08610a83b56d5ac75f5b
Signed-off-by: Sudhir Sharma <sudsha@codeaurora.org>
2013-03-07 15:19:15 -08:00
..
2012-01-26 11:22:42 -08:00

To understand all the Linux-USB framework, you'll use these resources:

    * This source code.  This is necessarily an evolving work, and
      includes kerneldoc that should help you get a current overview.
      ("make pdfdocs", and then look at "usb.pdf" for host side and
      "gadget.pdf" for peripheral side.)  Also, Documentation/usb has
      more information.

    * The USB 2.0 specification (from www.usb.org), with supplements
      such as those for USB OTG and the various device classes.
      The USB specification has a good overview chapter, and USB
      peripherals conform to the widely known "Chapter 9".

    * Chip specifications for USB controllers.  Examples include
      host controllers (on PCs, servers, and more); peripheral
      controllers (in devices with Linux firmware, like printers or
      cell phones); and hard-wired peripherals like Ethernet adapters.

    * Specifications for other protocols implemented by USB peripheral
      functions.  Some are vendor-specific; others are vendor-neutral
      but just standardized outside of the www.usb.org team.

Here is a list of what each subdirectory here is, and what is contained in
them.

core/		- This is for the core USB host code, including the
		  usbfs files and the hub class driver ("khubd").

host/		- This is for USB host controller drivers.  This
		  includes UHCI, OHCI, EHCI, and others that might
		  be used with more specialized "embedded" systems.

gadget/		- This is for USB peripheral controller drivers and
		  the various gadget drivers which talk to them.


Individual USB driver directories.  A new driver should be added to the
first subdirectory in the list below that it fits into.

image/		- This is for still image drivers, like scanners or
		  digital cameras.
../input/	- This is for any driver that uses the input subsystem,
		  like keyboard, mice, touchscreens, tablets, etc.
../media/	- This is for multimedia drivers, like video cameras,
		  radios, and any other drivers that talk to the v4l
		  subsystem.
../net/		- This is for network drivers.
serial/		- This is for USB to serial drivers.
storage/	- This is for USB mass-storage drivers.
class/		- This is for all USB device drivers that do not fit
		  into any of the above categories, and work for a range
		  of USB Class specified devices. 
misc/		- This is for all USB device drivers that do not fit
		  into any of the above categories.