This repository has been archived on 2026-03-14. You can view files and clone it, but cannot push or open issues or pull requests.
Files
ubports_kernel_google_msm/drivers/usb
Pavankumar Kondeti 3f6d1669f3 USB: android: Don't disable configuration for every adb close
Certain ADB commands like "adb usb" and "adb root" restart the
adb daemon running on the device.  These commands require USB
bus reset, otherwise adb commands on the host side would stuck
for ever.

USB bus reset can be forced from device side by re-enabling the
same composition.  Earlier, configuration is disabled when adb
daemon closes /dev/android_usb device file.  The configuration
is enabled again after adb daemon opens the device file. This
approach solves the "adb usb" problem with the below side effects.

1. When USB cable is disconnected, the Rx request is flushed and
an error code is returned to user space.  The adb daemon is simply
restarted in this case which cause an unnecessary rebinding of
all functions.
2. The above scenario can happen if host reset the bus when device
is in configured state.  If device disable pull-up during, bus
reset, USB CV CH9 test cases are failing.

The commit d9b1897 (USB: android: Avoid re-enabling the same
configuration) fixed the above side effects. But silently ignores the
original "adb usb" problem.

This commit is another attempt to solve all the above mentioned problems
by forcing re-enumeration only when device is in connected state.  That
means, "adb usb" and "adb root" commands force usb bus reset where as
plugging out a cable does not.

(cherry picked from commit 1aa235a6c0a3d67bff24609766baf5a7d5d8e3e4)

(cherry picked from commit 81fefe664ab6333f05209bed959a599a47baf71f)

Change-Id: Id3a40f62dd51aba6ec690d3326ed67ced32b946a
CRs-Fixed: 407882
Signed-off-by: Pavankumar Kondeti <pkondeti@codeaurora.org>

Signed-off-by: Neha Pandey <nehap@codeaurora.org>
2013-03-07 15:21:12 -08:00
..
2012-01-26 11:22:42 -08:00

To understand all the Linux-USB framework, you'll use these resources:

    * This source code.  This is necessarily an evolving work, and
      includes kerneldoc that should help you get a current overview.
      ("make pdfdocs", and then look at "usb.pdf" for host side and
      "gadget.pdf" for peripheral side.)  Also, Documentation/usb has
      more information.

    * The USB 2.0 specification (from www.usb.org), with supplements
      such as those for USB OTG and the various device classes.
      The USB specification has a good overview chapter, and USB
      peripherals conform to the widely known "Chapter 9".

    * Chip specifications for USB controllers.  Examples include
      host controllers (on PCs, servers, and more); peripheral
      controllers (in devices with Linux firmware, like printers or
      cell phones); and hard-wired peripherals like Ethernet adapters.

    * Specifications for other protocols implemented by USB peripheral
      functions.  Some are vendor-specific; others are vendor-neutral
      but just standardized outside of the www.usb.org team.

Here is a list of what each subdirectory here is, and what is contained in
them.

core/		- This is for the core USB host code, including the
		  usbfs files and the hub class driver ("khubd").

host/		- This is for USB host controller drivers.  This
		  includes UHCI, OHCI, EHCI, and others that might
		  be used with more specialized "embedded" systems.

gadget/		- This is for USB peripheral controller drivers and
		  the various gadget drivers which talk to them.


Individual USB driver directories.  A new driver should be added to the
first subdirectory in the list below that it fits into.

image/		- This is for still image drivers, like scanners or
		  digital cameras.
../input/	- This is for any driver that uses the input subsystem,
		  like keyboard, mice, touchscreens, tablets, etc.
../media/	- This is for multimedia drivers, like video cameras,
		  radios, and any other drivers that talk to the v4l
		  subsystem.
../net/		- This is for network drivers.
serial/		- This is for USB to serial drivers.
storage/	- This is for USB mass-storage drivers.
class/		- This is for all USB device drivers that do not fit
		  into any of the above categories, and work for a range
		  of USB Class specified devices. 
misc/		- This is for all USB device drivers that do not fit
		  into any of the above categories.