Robert Brose a78bfbfcfa [POWERPC] Add kernel parameter to set l3cr for MPC745x ...

Old-world powermacs don't set L2CR or L3CR on processor upgrade cards.
This simple patch allows the setting of L3CR via a kernel parameter
(like the existing kernel parameter to set L2CR).

Signed-off-by: Robert Brose <bob@qbjnet.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>

2008-04-01 20:43:09 +11:00

..

vdso32

[POWERPC] vdso: Fixes for cache block sizes

2007-11-20 13:56:31 +11:00

vdso64

[POWERPC] vdso: Fixes for cache block sizes

2007-11-20 13:56:31 +11:00

align.c

[POWERPC] Handle alignment faults on SPE load/store instructions

2007-09-14 08:51:48 -05:00

asm-offsets.c

[POWERPC] powerpc32: Remove asm-offsets ptrace cruft

2008-03-26 08:44:05 +11:00

audit.c

…

btext.c

[LIB]: Make PowerPC LMB code generic so sparc64 can use it too.

2008-02-13 16:56:49 -08:00

clock.c

[POWERPC] clk.h interface for platforms

2007-10-03 09:11:56 +10:00

compat_audit.c

…

cpu_setup_6xx.S

Spelling fix: explicitly

2007-10-19 23:22:55 +02:00

cpu_setup_44x.S

[POWERPC] 4xx: Add AMCC 460EX/460GT support to cputable.c & cpu_setup_44x.S

2008-03-26 07:19:16 -05:00

cpu_setup_pa6t.S

…

cpu_setup_ppc970.S

…

cputable.c

[POWERPC] 4xx: Add AMCC 460EX/460GT support to cputable.c & cpu_setup_44x.S

2008-03-26 07:19:16 -05:00

crash_dump.c

[LIB]: Make PowerPC LMB code generic so sparc64 can use it too.

2008-02-13 16:56:49 -08:00

crash.c

[LIB]: Make PowerPC LMB code generic so sparc64 can use it too.

2008-02-13 16:56:49 -08:00

dma_64.c

iommu sg: powerpc: convert iommu to use the IOMMU helper

2008-02-05 09:44:11 -08:00

entry_32.S

[POWERPC] Avoid unpaired stwcx. on some processors

2007-11-13 16:22:43 +11:00

entry_64.S

[POWERPC] Add 1TB workaround for PA6T

2007-10-17 22:30:09 +10:00

firmware.c

…

fpu.S

…

head_8xx.S

[POWERPC] 8xx: fix swap

2008-03-07 08:42:28 -06:00

head_32.S

[POWERPC] Remove dead code at KernelAltiVec

2008-02-26 22:17:03 +11:00

head_40x.S

[POWERPC] Fix swapper_pg_dir size when CONFIG_PTE_64BIT=y on FSL_BOOKE

2007-12-06 13:11:04 -06:00

head_44x.S

[POWERPC] Reworking machine check handling and Fix 440/440A

2007-12-23 13:11:59 -06:00

head_64.S

[POWERPC] Provide a way to protect 4k subpages when using 64k pages

2008-01-24 10:06:01 +11:00

head_booke.h

[POWERPC] Reworking machine check handling and Fix 440/440A

2007-12-23 13:11:59 -06:00

head_fsl_booke.S

[POWERPC] 85xx: Respect KERNELBASE, PAGE_OFFSET, and PHYSICAL_START on e500

2008-01-23 19:34:36 -06:00

ibmebus.c

[POWERPC] Make ibmebus use of_(un)register_driver

2008-01-25 22:52:50 +11:00

idle_6xx.S

…

idle_power4.S

…

idle.c

[POWERPC] Fix sysctl table check failure on PowerMac

2007-11-08 14:15:30 +11:00

init_task.c

…

io.c

…

iomap.c

[POWERPC] Add 64-bit resources support to pci_iomap

2007-09-20 07:36:52 -05:00

iommu.c

iommu sg: powerpc: remove DMA 4GB boundary protection

2008-02-05 09:44:11 -08:00

irq.c

Spelling fix: explicitly

2007-10-19 23:22:55 +02:00

isa-bridge.c

[POWERPC] pci_controller->arch_data really is a struct device_node *

2007-12-11 13:42:37 +11:00

kprobes.c

[POWERPC] Kill sparse warnings in kprobes

2008-02-20 13:33:37 +11:00

l2cr_6xx.S

Convert files to UTF-8 and some cleanups

2007-10-19 23:21:04 +02:00

legacy_serial.c

[POWERPC] Fix legacy serial search for opb bus ports

2008-02-06 16:30:00 +11:00

lparcfg.c

[POWERPC] lparcfg: Remove useless buffer allocation

2007-12-11 13:41:28 +11:00

machine_kexec_32.c

…

machine_kexec_64.c

…

machine_kexec.c

[LIB]: Make PowerPC LMB code generic so sparc64 can use it too.

2008-02-13 16:56:49 -08:00

Makefile

[POWERPC] Remove generated files on make clean

2008-02-14 22:11:02 +11:00

misc_32.S

[POWERPC] Add __ucmpdi2 for 64-bit comparisons in 32-bit kernels

2008-03-13 09:39:55 +11:00

misc_64.S

[POWERPC] kernel_execve is identical in 32 and 64 bit

2007-12-11 13:34:39 +11:00

misc.S

[POWERPC] Make setjmp/longjmp code usable outside of xmon

2008-01-25 22:52:50 +11:00

module_32.c

[POWERPC] Optimize counting distinct entries in the relocation sections

2007-12-21 15:05:58 +11:00

module_64.c

[POWERPC] Optimize counting distinct entries in the relocation sections

2007-12-21 15:05:58 +11:00

msi.c

…

nvram_64.c

…

of_device.c

[POWERPC] Use <linux/of_{platform, device}.h> and not <asm/...> variants.

2008-01-17 14:58:57 +11:00

of_platform.c

[POWERPC] arch/powerpc/kernel: Use for_each_child_of_node

2008-01-17 14:57:20 +11:00

paca.c

…

pci_32.c

[POWERPC] Remove update_bridge_resource

2008-01-23 19:32:30 -06:00

pci_64.c

[POWERPC] Always hookup PHB IO resource even when empty

2008-01-25 22:52:53 +11:00

pci_dn.c

[POWERPC] iSeries: eliminate pci_dn bussubno

2008-01-17 14:57:05 +11:00

pci-common.c

[POWERPC] Fix bogus test for unassigned PCI resources

2008-03-13 10:09:27 +11:00

pmc.c

[POWERPC] Made FSL Book-E PMC support more generic

2008-02-05 23:34:14 -06:00

ppc32.h

…

ppc_ksyms.c

[POWERPC] Really export empty_zero_page

2008-03-26 08:44:05 +11:00

proc_ppc64.c

…

process.c

Merge branch 'linux-2.6'

2008-03-26 08:44:18 +11:00

prom_init.c

[POWERPC] Efika: prune fixups and make them more carefull

2008-01-26 15:32:18 -07:00

prom_parse.c

[POWERPC] Add of_translate_dma_address

2007-12-11 15:43:35 +11:00

prom.c

[POWERPC] move_device_tree() should be __init

2008-04-01 20:43:08 +11:00

ptrace32.c

[POWERPC] Use regset code for compat PTRACE_*REGS* calls

2008-02-07 20:40:21 +11:00

ptrace.c

[POWERPC] user_regset PTRACE_SETREGS regression fix

2008-03-20 10:10:56 +11:00

rio.c

[POWERPC] Move RapidIO support code from arch/ppc

2008-01-23 19:35:15 -06:00

rtas_flash.c

Slab API: remove useless ctor parameter and reorder parameters

2007-10-17 08:42:45 -07:00

rtas_pci.c

[POWERPC] arch/powerpc/kernel: Use for_each_child_of_node

2008-01-17 14:57:20 +11:00

rtas-proc.c

…

rtas-rtc.c

…

rtas.c

[LIB]: Make PowerPC LMB code generic so sparc64 can use it too.

2008-02-13 16:56:49 -08:00

semaphore.c

…

setup_32.c

[POWERPC] Add kernel parameter to set l3cr for MPC745x

2008-04-01 20:43:09 +11:00

setup_64.c

[LIB]: Make PowerPC LMB code generic so sparc64 can use it too.

2008-02-13 16:56:49 -08:00

setup-common.c

[POWERPC] Add 'model: ...' line to common show_cpuinfo()

2008-03-26 08:44:04 +11:00

setup.h

…

signal_32.c

[POWERPC] arch/powerpc: Remove duplicate includes

2007-12-20 17:13:50 +11:00

signal_64.c

[POWERPC] Implement logging of unhandled signals

2007-10-12 14:05:18 +10:00

signal.c

[POWERPC] Implement logging of unhandled signals

2007-10-12 14:05:18 +10:00

signal.h

…

smp-tbsync.c

…

smp.c

[POWERPC] Make smp_send_stop() handle panic and xmon reboot

2008-01-25 22:52:50 +11:00

softemu8xx.c

[POWERPC] 8xx: Move softemu8xx.c from arch/ppc

2007-10-04 11:02:54 -05:00

suspend.c

…

swsusp_32.S

[POWERPC] Make altivec code in swsusp_32.S depend on CONFIG_ALTIVEC

2007-11-08 14:15:34 +11:00

swsusp_64.c

…

swsusp_asm64.S

…

swsusp.c

…

sys_ppc32.c

[POWERPC] Don't touch PT_DTRACE in exec

2008-03-26 08:44:05 +11:00

syscalls.c

remove include/asm-*/ipc.h

2007-10-17 08:42:55 -07:00

sysfs.c

remove __attribute_used__

2008-01-28 23:21:18 +01:00

systbl_chk.c

[POWERPC] Fix a couple of copyright symbols

2008-01-25 22:52:50 +11:00

systbl_chk.sh

[POWERPC] Fix a couple of copyright symbols

2008-01-25 22:52:50 +11:00

systbl.S

[POWERPC] Align the sys_call_table

2007-10-11 14:36:47 +10:00

tau_6xx.c

…

time.c

taskstats scaled time cleanup

2008-02-06 10:41:00 -08:00

traps.c

[POWERPC] Fix compilation for CONFIG_DEBUGGER=n and CONFIG_KEXEC=y

2008-02-07 11:40:18 +11:00

udbg_16550.c

[POWERPC] 4xx: Add early udbg support for 40x processors

2007-12-23 13:13:03 -06:00

udbg.c

[POWERPC] 4xx: Add early udbg support for 40x processors

2007-12-23 13:13:03 -06:00

vdso.c

Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/lmb-2.6

2008-02-26 21:08:45 +11:00

vecemu.c

…

vector.S

…

vio.c

[POWERPC] iSeries: Fix section mismatch in viodsasd

2008-02-06 16:30:00 +11:00

vmlinux.lds.S

all archs: consolidate init and exit sections in vmlinux.lds.h

2008-01-28 23:21:17 +01:00