This repository has been archived on 2026-03-14. You can view files and clone it, but cannot push or open issues or pull requests.
Files
ubports_kernel_google_msm/drivers/usb
Hemant Kumar d4377caea3 EHCI: HSIC: Handle wakeup interrupt properly during probe
During HSIC probe driver registers the level triggered interrupt
on wakeup gpio. Wakeup irq line is disabled based on the return
status of interrupt registration. There is a possibility that
wakeup gpio is already pulled high after registering the interrupt
which can cause wakeup interrupts to be fired on continuously
without getting chance to disable the irq line. Hence do not
enable wake up interrupt on request irq.

CRs-Fixed: 394540
Signed-off-by: Hemant Kumar <hemantk@codeaurora.org>
(cherry picked from commit bbcdcbc3f09cc90d4b8fdd607244c3d73c9ae801)

Conflicts:

	drivers/usb/host/ehci-msm-hsic.c

Change-Id: I9b20d54d919333d11201d30513b4111f3fb31df3
Signed-off-by: Sudhir Sharma <sudsha@codeaurora.org>
2013-03-07 15:19:01 -08:00
..
2012-01-26 11:22:42 -08:00

To understand all the Linux-USB framework, you'll use these resources:

    * This source code.  This is necessarily an evolving work, and
      includes kerneldoc that should help you get a current overview.
      ("make pdfdocs", and then look at "usb.pdf" for host side and
      "gadget.pdf" for peripheral side.)  Also, Documentation/usb has
      more information.

    * The USB 2.0 specification (from www.usb.org), with supplements
      such as those for USB OTG and the various device classes.
      The USB specification has a good overview chapter, and USB
      peripherals conform to the widely known "Chapter 9".

    * Chip specifications for USB controllers.  Examples include
      host controllers (on PCs, servers, and more); peripheral
      controllers (in devices with Linux firmware, like printers or
      cell phones); and hard-wired peripherals like Ethernet adapters.

    * Specifications for other protocols implemented by USB peripheral
      functions.  Some are vendor-specific; others are vendor-neutral
      but just standardized outside of the www.usb.org team.

Here is a list of what each subdirectory here is, and what is contained in
them.

core/		- This is for the core USB host code, including the
		  usbfs files and the hub class driver ("khubd").

host/		- This is for USB host controller drivers.  This
		  includes UHCI, OHCI, EHCI, and others that might
		  be used with more specialized "embedded" systems.

gadget/		- This is for USB peripheral controller drivers and
		  the various gadget drivers which talk to them.


Individual USB driver directories.  A new driver should be added to the
first subdirectory in the list below that it fits into.

image/		- This is for still image drivers, like scanners or
		  digital cameras.
../input/	- This is for any driver that uses the input subsystem,
		  like keyboard, mice, touchscreens, tablets, etc.
../media/	- This is for multimedia drivers, like video cameras,
		  radios, and any other drivers that talk to the v4l
		  subsystem.
../net/		- This is for network drivers.
serial/		- This is for USB to serial drivers.
storage/	- This is for USB mass-storage drivers.
class/		- This is for all USB device drivers that do not fit
		  into any of the above categories, and work for a range
		  of USB Class specified devices. 
misc/		- This is for all USB device drivers that do not fit
		  into any of the above categories.