Current implementation decides the card type exclusively. Even though
eMMC device can support both HS200 and DDR mode, card type will be
set only for HS200. If the host doesn't support HS200 but has DDR
capability, then DDR mode can't be selected.
Change-Id: Ifb5bb7fb0b7f4472734e10ec39d47e3f12e32cf8
Signed-off-by: Seungwon Jeon <tgih.jun@samsung.com>
Reviewed-by: Subhash Jadavani <subhashj@codeaurora.org>
Signed-off-by: Chris Ball <cjb@laptop.org>
Signed-off-by: Subhash Jadavani <subhashj@codeaurora.org>
This bug was introduced in the 'MMC-4.5 Power OFF Notify Rework' fix.
Prior to the aforementioned patch, during resume mmc_init_card was being
invoked. The aforesaid patch invokes mmc_card_awake, prior to which
mmc_power_up has already set the clock frequency to 400Khz. Since the card
init is not done again, this frequency stays as is and results in data
time-out errors.
Two new functions
* mmc_save_ios
* mmc_restore_ios
were added.
The mmc_save_ios is invoked during mmc_suspend process and it saves the
current ios values, while mmc_restore_ios is invoked during mmc_resume process
and restores the previous ios values before sending the awake command. This
ensures that the clock, timing, bus-width etc are set properly before any
request is sent to the driver.
Signed-off-by: Asutosh Das <asutoshd@codeaurora.org>
This is a rework of the existing POWER OFF NOTIFY patch. The current problem
with the patch comes from the ambiguity on the usage of POWER OFF NOTIFY
together with SLEEP and misunderstanding on the usage of MMC_POWER_OFF
power_mode from mmc_set_ios in different host controller drivers.
This new patch works around this problem by adding a new host CAP,
MMC_CAP2_POWER_OFF_VCCQ_DURING_SUSPEND, which when set sends a
POWER OFF NOTIFY from mmc_suspend instead of SLEEP. It is expected that host
controller drivers will set this CAP, if they switch off both Vcc and Vccq
from MMC_POWER_OFF condition within mmc_set_ios. However, note that there
is no harm in sending MMC_POWER_NOTIFY even if Vccq is not switched off.
This patch also sends POWER OFF NOTIFY from power management routines (e.g.
mmc_power_save_host, mmc_pm_notify/PM_SUSPEND_PREPARE, mmc_stop_host), which
does reinitialization of the eMMC on the return path of the power management
routines (e.g. mmc_power_restore_host, mmc_pm_notify/PM_POST_RESTORE,
mmc_start_host).
This patch sets POWER_OFF_NOTIFICATION to POWER_OFF_SHORT if it is sent from
the suspend sequence. If it is sent from shutdown sequence then it is set to
POWER_OFF_LONG.
Earlier implementation of PowerOff Notify as a core function is replaced as
a device's bus operation.
Signed-off-by: Saugata Das <saugata.das@linaro.org>
Signed-off-by: Girish K S <girish.shivananjappa@linaro.org>
changes in v5:
modified the the handling of return value in mmc_poweroff_notify.
changes in v4:
As suggested in review,
- Moved mmc_can_poweroff_notify to core.c
- Moved mmc_claim_host, mmc_release_host outside mmc_poweroff_notify
- Added check for wrong initialization for poweroff_notify_type
- mmc_poweroff_notify is modified to take as 2nd parameter
changes in v3:
This version addresses the review comments given by Subhash and Ulf
changes in v2:
This version addresses the changes suggested by Ulf
[smuckle@codeaurora.org: resolve minor merge conflicts]
Signed-off-by: Steve Muckle <smuckle@codeaurora.org>
The write packing statistics are used for the packed commands unit tests
in order to determine test success or failure
Change-Id: I1b330033e59a775c64fb915038d58615aff0dbdd
Signed-off-by: Maya Erez <merez@codeaurora.org>
The write packing control will ensure that read requests latency is
not increased due to long write packed commands.
The trigger for enabling the write packing is managing to pack several
write requests. The number of potential packed requests that will trigger
the packing can be configured via sysfs by writing the required value to:
/sys/block/<block_dev_name>/num_wr_reqs_to_start_packing.
The trigger for disabling the write packing is fetching a read request.
Change-Id: I982170fa6dca9150ea4310bb546b838b7fd30e9b
Signed-off-by: Maya Erez <merez@codeaurora.org>
This patch supports packed write command of eMMC4.5 device.
Several writes can be grouped in packed command and all data
of the individual commands can be sent in a single transfer
on the bus.
Change-Id: I391c3e5f73b785a8b7d25eb8256051020cfb0631
Signed-off-by: Seungwon Jeon <tgih.jun@samsung.com>
Signed-off-by: Maya Erez <merez@codeaurora.org>
Enable eMMC background operations (BKOPS) feature.
If URGENT_BKOPS is set after a response, note that BKOPS
are required. After all I/O requests are finished, run
BKOPS if required. Should read/write operations be requested
during BKOPS, first issue HPI to interrupt the ongoing BKOPS
and then service the request.
If BKOPS-STATUS is upper than LEVEL2, need to check until clear
the BKOPS-STATUS vaule.
If you want to enable this feature, set MMC_CAP2_BKOPS.
And if you want to set the BKOPS_EN bit in ext_csd register,
use the MMC_CAP2_INIT_BKOPS.
Future considerations
* Check BKOPS_LEVEL=1 and start BKOPS in a preventive manner.
* Interrupt ongoing BKOPS before powering off the card.
* How get BKOPS_STATUS value.(periodically send ext_csd command?)
Change-Id: Ia679c661a282072a7e54d10fc59d8ec1cbecae96
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Konstantin Dorfman <kdorfman@codeaurora.org>
This feature delete the unmap memory region of the eMMC card,
by writing to a specific register in the EXT_CSD
unmap region is the memory region that were previously deleted
(by erase, trim or discard operation)
Change-Id: I7f1df8e87fb782979fd90e064eca00704caca54b
Signed-off-by: Yaniv Gardi <ygardi@codeaurora.org>
Signed-off-by: Maya Erez <merez@codeaurora.org>
This patch adds packed command feature of eMMC4.5.
The maximum number for packing read(or write) is offered
and exception event relevant to packed command which is
used for error handling is enabled. If host wants to use
this feature, MMC_CAP2_PACKED_CMD should be set.
Change-Id: I8013970fc9d54da7d92b0aca2bb0746189b9825b
Signed-off-by: Seungwon Jeon <tgih.jun@samsung.com>
Signed-off-by: Maya Erez <merez@codeaurora.org>
mmcq performance numbers are not captured since asynchronous
MMC request support got added in MMC block driver. So printing
out these numbers (which are all zeros) just adds confusion.
This patch removes the printing of mmcq performance numbers
statistics.
CRs-Fixed: 364206
Change-Id: I7213b11c8e9e055894c9902af7e975de3be1c519
Signed-off-by: Subhash Jadavani <subhashj@codeaurora.org>
Commit 06e8935feb ("optimized SDIO IRQ handling for single irq")
introduced some spurious calls to SDIO function interrupt handlers,
such as when the SDIO IRQ thread is started, or the safety check
performed upon a system resume. Let's add a flag to perform the
optimization only when a real interrupt is signaled by the host
driver and we know there is no point confirming it.
Change-Id: Ibfd6b35589b15fabea7b1c18dfa2197a78866b61
Reported-by: Sujit Reddy Thumma <sthumma@codeaurora.org>
Signed-off-by: Nicolas Pitre <nico@linaro.org>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Chris Ball <cjb@laptop.org>
Signed-off-by: Sujit Reddy Thumma <sthumma@codeaurora.org>
Some INAND MCP devices advertise incorrect data timeout values.
This leads to data timeout errors on the platform. So, add a quirk
for such devices to facilitate proper functionality.
CRs-Fixed: 355347
Change-Id: If4fdd2724dc407450da8529222efca7ee94f50df
Signed-off-by: Pratibhasagar V <pratibha@codeaurora.org>
Currently performance numbers are captured for each SDCC
transfers unconditionally which may add the overhead and
could reduce the SDCC read/write throughput numbers.
This change adds additional control for enabling/disabling the
capturing of performance numbers at runtime. We already have sysfs
entry named "perf" for msm sdcc devices. Currently setting this
entry to 0 clears the performance statistics. But now we are
changing the definition of this entry as mentioned below:
Disable performance capturing and clear the performance statistics:
"echo 0 > /sys/devices/platform/msm_sdcc.<n>/perf"
Enable performance capturing:
"echo 1 > /sys/devices/platform/msm_sdcc.<n>/perf"
CRs-fixed: 345170
Change-Id: I3ab9288fd87cc8a8ada6c0c3d066cac4f68d79b7
Signed-off-by: Subhash Jadavani <subhashj@codeaurora.org>
mmc_set_ios() is used by host drivers during suspend/resume
routines in indirect way i.e., by calling host->ops->set_ios().
But now with MMC_CLKGATE enabled, mmc_set_ios() also updates
host->clk_gated flag. So export this API so that host controller
drivers can use it.
Change-Id: Ib0c177635bb8d87ba68c98e08b8d940c73f2b80c
Signed-off-by: Sujit Reddy Thumma <sthumma@codeaurora.org>
MMC core reads SEC_COUNT information from EXT_CSD register and assumes
that the card supports sector access mode. Some eMMC cards (<=2GB) do not
support this mode even though they have SEC_COUNT value defined, causing
failure while populating extended partitions. Sector/Byte access mode
information is stored in OCR register. Hence, read OCR bit 30 and then
confirm it with SEC_COUNT value to know whether the card supports sector
access mode or byte access mode.
Change-Id: Ifdfff35309e8667cd2c2ac2761b9a708d5b785d3
Signed-off-by: Sujith Reddy Thumma <sthumma@codeaurora.org>
There is a possible race with mmc_claim_host() in mmc_sd_suspend()/
mmc_suspend() and mmc_claim_host() in mmc_blk_issue_rq() when runtime
pm is enabled. Fix this by blocking processing of requests until the
previous runtime suspend is processed and then resume as part of
msmsdcc_enable(). Previous fix has card detection failure as a side effect
during resume.
Change-Id: I9cb31269638d9db4e630eb22b973a5335af1bda4
Signed-off-by: Sujith Reddy Thumma <sthumma@codeaurora.org>
[sboyd: Dropped msm driver change]
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Profiling code is added to measure read, write times for
the MMC requests at various MMC layers. Profiling is done
at the MMC queue and at the driver level. This information
can be viewed through a sysfs entry called perf.
Change-Id: I7c65bfe25a1f7774e3a9abf1f9539e690b3718ec
Signed-off-by: Aparna Mallavarapu <aparnam@qualcomm.com>
Signed-off-by: Rebecca Schultz <rschultz@google.com>
pmem: Use the thread group leader insted of the current thread.
Instead of keeping track of the current thread, use the thread group leader
Signed-off-by: Rebecca Schultz <rschultz@google.com>
pmem: Add some apis to reference and flush pmem files by file struct
The api to refer to pmem files by fd should be depricated, it can
cause problems if a processes fd table changes while the kernel is processing
data in a pmem file. This change adds the safer api.
Signed-off-by: Rebecca Schultz Zavin <rebecca@android.com>
pmem: Remove unused depricated fd api to pmem.
Signed-off-by: Rebecca Schultz Zavin <rebecca@android.com>
pmem: Remove error message when calling get_pmem_addr
This call is used from the mdp driver to determine if the memory
is in pmem or in the fb. We will encounter this case during normal operation
so this error message should be removed.
Signed-off-by: Rebecca Schultz Zavin <rebecca@android.com>
pmem: Add include sched.h to fix compile errors
Signed-off-by: Rebecca Schultz Zavin <rebecca@android.com>
pmem: remove HW3D_* ioctls
Signed-off-by: Dima Zavin <dima@android.com>
pmem: Expose is_pmem_file to the in-kernel users.
Signed-off-by: Dima Zavin <dima@android.com>
pmem: Make the exposed functions be noops if CONFIG_ANDROID_PMEM is not set.
Signed-off-by: Dima Zavin <dima@android.com>
misc: pmem: don't flush if file was opened with O_SYNC
Change-Id: I067218658a0d7f7ecc1fe73e9ff6b0c3b3054653
Signed-off-by: Dima Zavin <dima@android.com>
The msm_idle_stats_update_event() function is now a public function.
In case of IDLE_TIMER expiry, kgsl calls this function to immediately
wake up waiting processes.
Change-Id: Ia259d10e08deea71db047d8091cc97066fba3c1c
Signed-off-by: Lynus Vaz <lvaz@codeaurora.org>
(cherry picked from commit bdb0c07e65cad13deea5d187ad553cc9782c620d)
Conflicts:
arch/arm/mach-msm/idle_stats_device.c
drivers/gpu/msm/kgsl_pwrscale_idlestats.c
Add a struct member to allow GPU DCVS daemon to configure the number
of samples collected at runtime. This increases the responsiveness
of the daemon in low fps use cases.
Change-Id: Ibbf17c8a81c9bd819d96c16af2f17bc60c999df9
Signed-off-by: Lynus Vaz <lvaz@codeaurora.org>
(cherry picked from commit fdecd1e91f9b211011a6610199219523e5794c68)
Conflicts:
arch/arm/mach-msm/idle_stats_device.c
Add a core infrastructure for transmitting idle stats to user
space for use by other devices in the system such as the GPU.
Signed-off-by: Lucille Sylvester <lsylvest@codeaurora.org>
(cherry picked from commit 611d0d9e5b51f9e9906c956b619a91a35964210d)
Conflicts:
arch/arm/mach-msm/Makefile
Change-Id: Ifed8a2636be0d381f616568ad85764d5e64a1757
Some keyboard controller have support for more than
16 columns and rows.
Change-Id: I3fd207bfcb21648e1e6601c20588907a6c45270e
Signed-off-by: Trilok Soni <tsoni@codeaurora.org>
(cherry picked from commit 1fcc71dd2431913af3a5baab5d2e25ffc318a5ad)
Conflicts:
include/linux/input/matrix_keypad.h
For chip drivers that support both pwm and non-pwm modes
would encounter compilation errors if the platform doesn't
have support for pwm though the chip is programmed to work
in non-pwm mode. Add __weak attributed pwm functions to avoid
compilation issues in these scenarios.
Change-Id: I6affff1ced9c84aefa3962b94780fd3e50ee1c35
Signed-off-by: Mohan Pallaka <mpallaka@codeaurora.org>
(cherry picked from commit f056d9e5cfbd376a266c1db32c271d0f3ad0319b)
Add platform data for the KS8851 SPI Ethernet device to
enable proper GPIO configuration for the reset and
interrupt pins.
Change-Id: I79adae4628f38a2ca5bc17825258c41ab5e1623d
Signed-off-by: Stepan Moskovchenko <stepanm@codeaurora.org>
(cherry picked from commit 93d79ecd11a79a097a5c051438d9c3502902af6e)
Conflicts:
arch/arm/mach-msm/board-msm8960.c
drivers/net/ks8851.c
Provide richer information to applications about
actual demux capabilities
Change-Id: I5b849ea72366f5332f716735818b9f090c46de43
Signed-off-by: Hamad Kadmany <hkadmany@codeaurora.org>
(cherry picked from commit d2c325e05cce18145b4639eb22b205efedfb34c5)
Opensource driver atmel_mxt_ts has the platform data
structure name as atmel_maxtouch. Avoid name conflict
by renaming atmel_maxtouch driver's platform data to
maxtouch_platform_data.
Change-Id: I4bf3ed83e3eab55c4464de365c6009965da73744
Signed-off-by: Mohan Pallaka <mpallaka@codeaurora.org>
(cherry picked from commit 4e9a94e60d589581799ac7c3341ec4dfac8793a5)
Conflicts:
arch/arm/mach-msm/board-msm7x27a.c
Create a new iommu api to return the base address of the domain's
pagetable.
Change-Id: Ibf5425fa7ae253b16bfe795614bd7943efd7e3e3
Signed-off-by: Shubhraprakash Das <sadas@codeaurora.org>
Add the ability to pass flags into the iommu_domain_alloc
function to specify domain attributes.
Signed-off-by: Stepan Moskovchenko <stepanm@codeaurora.org>
Add IOMMU ops functions to allow mapping and unmapping
whole ranges of address space based on a scatterlist.
Signed-off-by: Stepan Moskovchenko <stepanm@codeaurora.org>
Holding a wakelock avoids suspend power collapse, which
allow the BT idle timer to kick in, which eventually
initiates BT low power modes.
CRs-Fixed: 361067
Change-Id: I93e3950b6f854e70dbce092a5529120ec008c2b8
Signed-off-by: Rahul Kashyap <rkashyap@codeaurora.org>
Various LE profiles require very specific LE parameters for
both establishing and maintaining LE connections to remote
peripherals. These LE only parameters are encapsulated into
a single sockopts structure, and may be passed from user space.
CRs-Fixed: 335971
Change-Id: I408edb97ab0fa9717c7d3fe5fc8ad6ac179a2fff
Signed-off-by: Brian Gix <bgix@codeaurora.org>
Some Remote device disconnects service level connection but do not initiate
ACL disconnect hence ACL connection remains alive for 40s. Reducing timer
value to 8s as reconnection initated by remote device was rejected due to
existing ACL connection.
Change-Id: I26c2665bb9754ad08e3bc8d8a58f192c47c41764
CRs-Fixed: 337702
Signed-off-by: Rohit Singh <singhr@codeaurora.org>
If the remote device does not support Encryption Pause,
It might disable Encryption during role switch. Allow a
Grace period of 500 ms for such devices to re-enable.
Change-Id: I8af8082e16e185fe8c15adaf07169cc73179c59f
CRs-fixed: 336828
Signed-off-by: Prabhakaran Mc <prabhakaranmc@codeaurora.org>
Fix issue where when setting up an AMP link the socket pointer
is not set when the logical link complete callback is called,
resulting in the L2CAP channel being disconnected.
The socket pointer must be set before the HCI logical link
create command is sent, as it is possible for the logical link
complete event to arrive before the HCI command send logic
has returned.
Change-Id: I5d89c14d45bd6b4cf47d5754f822b435ce8076a8
Signed-off-by: Peter Krystad <pkrystad@codeaurora.org>
CRs-fixed: 344553
Take a reference on the hci_conn and do not de-reference l2cap_conn
while setting up the A2MP fixed channel. l2cap_conn is not reference
counted and may go away before the channel is set up.
This fixes scenario where the ACL disconnects (and l2cap_conn goes
away) while amp_conn_ind worker is running or is on the workqueue
waiting to run.
Change-Id: I10fc6d9b146fcc5e010f26a046f7e0570f2b93dd
CRs-fixed: 347079
Signed-off-by: Peter Krystad <pkrystad@codeaurora.org>
Increase the L2CAP move timeout to allow adequate time for both
controllers to exit sniff mode and exchange move signals. This
fixes an issue where sending a move request to move a channel
from AMP back to BR-EDR and both controllers need to exit sniff
first the move response is not received before the move timeout
expires and the channel is disconnected. This value needs to be
at least 4X the sniff interval.
Change-Id: I31d5b3fc52489a5e78818aa3bec654cb777f66f1
CRs-fixed: 341368
Signed-off-by: Peter Krystad <pkrystad@codeaurora.org>
This feature is required for implementing Low energy
proximity client immediate alert service. The proximtiy
client registers with the kernel for receiving RSSI updates
of the remote device. The kernel starts polling for RSSI
value using READ_RSSI HCI command and When it reaches
a particular threshold set by the proximity client,
updates are sent to the client.
Change-Id: I723dd140ad3bf02978c57b3ab127bb6768f28cca
CRs-fixed: 344936
Signed-off-by: Archana Ramachandran <archanar@codeaurora.org>
Connection security level is modified based on remote device's
extended feature. Deciding SSP capability of remote device
by EIR response is incorrect, because few BT2.1 devices do not
send EIR and few BT2.1 devices which send EIR do not support
SSP. SSP capability of remote device has to be decided based on
remote_extended_features event. This patch makes sure that
MEDIUM_SECURITY is set for non ssp devices' pairing process.
Change-Id: I328a35a30895f2ab6abaaeec51b364ecd633e642
CRs-fixed: 339166
Signed-off-by: Prabhakaran Mc <prabhakaranmc@codeaurora.org>
Expose Bluetooth remote features to the userspace. A2DP profile
setup in the userspace would need this information to
determine if the remote side supports EDR ACL link or not.
Change-Id: Ib6713707baaf30ffe872247313b2185ae2897385
Signed-off-by: Sunny Kapdi <sunnyk@codeaurora.org>
When a Bluetooth device is powered down while RFCOMM connections are
open, there are race conditions where RFCOMM tries to use an HCI
connection after the data structures have been deleted. Since the
powerdown procedure runs in process context, it is possible to lock
sockets before accessing them to close connections. This change adds
that locking, which will serialize socket access between processors
during powerdown.
Change-Id: I587720799b35d9ee6e66340bdeda8a2b9e2ea7b5
CRs-fixed: 336893
Signed-off-by: Mat Martineau <mathewm@codeaurora.org>
Because traffic between the local GATT client(s) and
remote servers are subject to different controls than
remote clients and the local server, all on the shared
fixed CID, it is important to manage the traffic on
seperate sockets.
Change-Id: I62385143c86522f4b123b32592b69f2a0ae6dc76
CRs-fixed: 336029
Signed-off-by: Brian Gix <bgix@codeaurora.org>
We only support a 23 octet MTU, so auto-respond to all
MTU change requests with the 23 octet response.
Change-Id: Ic69d5f068759d983f8cd98b329acbb9d3a481c49
CRs-fixed: 336025
Signed-off-by: Brian Gix <bgix@codeaurora.org>
Some rebalancing of refcnts due to issues found during testing:
Refcnt was not being released on security completion, if local side
was paired but the remote side had deleted the pairing info, and then
the re-pair failed to complete successfully.
Additionally, the refcnt was not held-released properly if pairing
was initiated due to the client socket being opened with security
level elevated from the start.
Change-Id: I120fed4dc74035d280781ca949a23d4cbcfa3f3e
CRs-fixed: 335993
Signed-off-by: Brian Gix <bgix@codeaurora.org>
On ACL connection complete with a remote device, the remote
device lmp version should be available with Controller. The
current change is to read this information from controller to
host and update to bluez userspace through management APIs.
Change-Id: Ie152ed98fa0a6cf9ab170a6bb8c6a05b5b9dfcb0
Signed-off-by: Srinivas Krovvidi <skrovvid@codeaurora.org>
When doing L2CAP configuration, use the correct retransmit and monitor
timeouts when configuring (or reconfiguring) AMP channels. The host
stack needs to use the timeouts read from incoming configuration
responses, and write appropriate timeouts when sending configuration
responses.
Change-Id: I1271ade93dbfee58a1cac115280704a327e901b2
Signed-off-by: Mat Martineau <mathewm@codeaurora.org>
