This driver allows userspace to receive notification when client
specified key combinations are pressed.
The client opens /dev/keychord and writes a list of keychords
for the driver to monitor.
The client then reads or polls /dev/keychord for notifications.
A client specified ID for the keychord is returned from read()
when a keychord press is detected.
Signed-off-by: Mike Lockwood <lockwood@android.com>
keychord: fix to build without CONFIG_PREEMPT
Change-Id: I911f13aeda4224b6fa57863bc7e8972fec8837fb
Add a platform device in the board file to specify a reset key-combo.
The first time the key-combo is detected a work function that syncs
the filesystems is scheduled. If all the keys are released and then
pressed again, it calls panic. Reboot on panic should be set for
this to work.
Change-Id: I9d54283ca1fba45e4b1ae1a407524cdda8171143
Signed-off-by: Arve Hjønnevåg <arve@android.com>
Remove the early suspend handler. Leave the suspend functions
for now, they should eventually get called through a userspace
interface.x
Change-Id: I67f9dafe32fe32577bab93c42b95824db96c215c
Signed-off-by: Colin Cross <ccross@android.com>
Supports keyboard matrixces, direct inputs, direct outputs and axes connected to gpios.
Change-Id: I5e921e6e3a1cc169316ee3b665f4cc21b5735114
Signed-off-by: Arve Hjønnevåg <arve@android.com>
Signed-off-by: Nick Pelly <npelly@google.com>
Add a family of knobs to /sys/kernel/ipv4 for controlling the TCP window size:
tcp_wmem_min
tcp_wmem_def
tcp_wmem_max
tcp_rmem_min
tcp_rmem_def
tcp_rmem_max
This six values mirror the sysctl knobs in /proc/sys/net/ipv4/tcp_wmem and
/proc/sys/net/ipv4/tcp_rmem.
Sysfs, unlike sysctl, allows us to set and manage the files' permissions and
owners.
Signed-off-by: Robert Love <rlove@google.com>
Introduce a new socket ioctl, SIOCKILLADDR, that nukes all sockets
bound to the same local address. This is useful in situations with
dynamic IPs, to kill stuck connections.
Signed-off-by: Brian Swetland <swetland@google.com>
net: fix tcp_v4_nuke_addr
Signed-off-by: Dima Zavin <dima@android.com>
net: ipv4: Fix a spinlock recursion bug in tcp_v4_nuke.
We can't hold the lock while calling to tcp_done(), so we drop
it before calling. We then have to start at the top of the chain again.
Signed-off-by: Dima Zavin <dima@android.com>
net: ipv4: Fix race in tcp_v4_nuke_addr().
To fix a recursive deadlock in 2.6.29, we stopped holding the hash table lock
across tcp_done() calls. This fixed the deadlock, but introduced a race where
the socket could die or change state.
Fix: Before unlocking the hash table, we grab a reference to the socket. We
can then unlock the hash table without risk of the socket going away. We then
lock the socket, which is safe because it is pinned. We can then call
tcp_done() without recursive deadlock and without race. Upon return, we unlock
the socket and then unpin it, killing it.
Change-Id: Idcdae072b48238b01bdbc8823b60310f1976e045
Signed-off-by: Robert Love <rlove@google.com>
Acked-by: Dima Zavin <dima@android.com>
ipv4: disable bottom halves around call to tcp_done().
Signed-off-by: Robert Love <rlove@google.com>
Signed-off-by: Colin Cross <ccross@android.com>
ipv4: Move sk_error_report inside bh_lock_sock in tcp_v4_nuke_addr
When sk_error_report is called, it wakes up the user-space thread, which then
calls tcp_close. When the tcp_close is interrupted by the tcp_v4_nuke_addr
ioctl thread running tcp_done, it leaks 392 bytes and triggers a WARN_ON.
This patch moves the call to sk_error_report inside the bh_lock_sock, which
matches the locking used in tcp_v4_err.
Signed-off-by: Colin Cross <ccross@android.com>
With CONFIG_ANDROID_PARANOID_NETWORK, require specific uids/gids to instantiate
network sockets.
Signed-off-by: Robert Love <rlove@google.com>
paranoid networking: Use in_egroup_p() to check group membership
The previous group_search() caused trouble for partners with module builds.
in_egroup_p() is also cleaner.
Signed-off-by: Nick Pelly <npelly@google.com>
Fix 2.6.29 build.
Signed-off-by: Arve Hjønnevåg <arve@android.com>
net: Fix compilation of the IPv6 module
Fix compilation of the IPv6 module -- current->euid does not exist anymore,
current_euid() is what needs to be used.
Signed-off-by: Steinar H. Gunderson <sesse@google.com>
When connecting usb or the charger the device would often go back to sleep
before the charge led and screen turned on.
Change-Id: I01def6d86ddece0d4e31d2a91d176ed0975b6b9d
Signed-off-by: Arve Hjønnevåg <arve@android.com>
Add an ioctl, EVIOCSSUSPENDBLOCK, to enable a wakelock that will block
suspend while the event queue is not empty. This allows userspace code to
process input events while the device appears to be asleep.
The current code holds the wakelock for up 5 seconds for every input
device and client. This can prevent suspend if sensor with a high data
rate is active, even when that sensor is not capable of waking the
device once it is suspended.
Change-Id: I624d66ef30a0b3abb543685c343382b8419b42b9
Signed-off-by: Arve Hjønnevåg <arve@android.com>
This adds /sys/power/wake_lock and /sys/power/wake_unlock.
Writing a string to wake_lock creates a wake lock the
first time is sees a string and locks it. Optionally, the
string can be followed by a timeout.
To unlock the wake lock, write the same string to wake_unlock.
Change-Id: I66c6e3fe6487d17f9c2fafde1174042e57d15cd7
If CACHE_FLUSH_RANGE_LIMIT is defined, then the entire dcache will
be flushed if the requested range is larger than this limit.
Change-Id: I29277d645a9d6716b1952cf3b870c78496261dd0
Signed-off-by: Arve Hjønnevåg <arve@android.com>
By default the kernel tries to keep half as much memory free at each
order as it does for one order below. This can be too agressive when
running without swap.
Change-Id: I5efc1a0b50f41ff3ac71e92d2efd175dedd54ead
Signed-off-by: Arve Hjønnevåg <arve@android.com>
synchronize_rcu can be very expensive, averaging 100 ms in
some cases. In cgroup_attach_task, it is used to prevent
a task->cgroups pointer dereferenced in an RCU read side
critical section from being invalidated, by delaying the
call to put_css_set until after an RCU grace period.
To avoid the call to synchronize_rcu, make the put_css_set
call rcu-safe by moving the deletion of the css_set links
into free_css_set_work, scheduled by the rcu callback
free_css_set_rcu.
The decrement of the cgroup refcount is no longer
synchronous with the call to put_css_set, which can result
in the cgroup refcount staying positive after the last call
to cgroup_attach_task returns. To allow the cgroup to be
deleted with cgroup_rmdir synchronously after
cgroup_attach_task, have rmdir check the refcount of all
associated css_sets. If cgroup_rmdir is called on a cgroup
for which the css_sets all have refcount zero but the
cgroup refcount is nonzero, reuse the rmdir waitqueue to
block the rmdir until free_css_set_work is called.
Signed-off-by: Colin Cross <ccross@android.com>
Conflicts:
kernel/cgroup.c
Change-Id: I3b3f245c8f5e2e5d33f1e54178b2bb6ef10a0817
Rather than using explicit euid == 0 checks when trying to move
tasks into a cgroup via CFS, move permission checks into each
specific cgroup subsystem. If a subsystem does not specify a
'allow_attach' handler, then we fall back to doing our checks
the old way.
Use the 'allow_attach' handler for the 'cpu' cgroup to allow
non-root processes to add arbitrary processes to a 'cpu' cgroup
if it has the CAP_SYS_NICE capability set.
This version of the patch adds a 'allow_attach' handler instead
of reusing the 'can_attach' handler. If the 'can_attach' handler
is reused, a new cgroup that implements 'can_attach' but not
the permission checks could end up with no permission checks
at all.
Change-Id: Icfa950aa9321d1ceba362061d32dc7dfa2c64f0c
Original-Author: San Mehat <san@google.com>
Signed-off-by: Colin Cross <ccross@android.com>
Changes the meaning of CGRP_RELEASABLE to be set on any cgroup
that has ever had a task or cgroup in it, or had css_get called
on it. The bit is set in cgroup_attach_task, cgroup_create,
and __css_get. It is not necessary to set the bit in
cgroup_fork, as the task is either in the root cgroup, in
which can never be released, or the task it was forked from
already set the bit in croup_attach_task.
Signed-off-by: Colin Cross <ccross@android.com>
This patch implements CONFIG_DEBUG_RODATA, allowing
the kernel text section to be marked read-only in
order to catch bugs that write over the kernel. This
requires mapping the kernel code, plus up to 4MB, using
pages instead of sections, which can increase TLB
pressure.
The kernel is normally mapped using 1MB section entries
in the first level page table, and the first level page
table is copied into every mm. This prevents marking
the kernel text read-only, because the 1MB section
entries are too large granularity to separate the init
section, which is reused as read-write memory after
init, and the kernel text section. Also, the top level
page table for every process would need to be updated,
which is not possible to do safely and efficiently on SMP.
To solve both problems, allow alloc_init_pte to overwrite
an existing section entry with a fully-populated second
level page table. When CONFIG_DEBUG_RODATA is set, all
the section entries that overlap the kernel text section
will be replaced with page mappings. The kernel always
uses a pair of 2MB-aligned 1MB sections, so up to 2MB
of memory before and after the kernel may end up page
mapped.
When the top level page tables are copied into each
process the second level page tables are not copied,
leaving a single second level page table that will
affect all processes on all cpus. To mark a page
read-only, the second level page table is located using
the pointer in the first level page table for the
current process, and the supervisor RO bit is flipped
atomically. Once all pages have been updated, all TLBs
are flushed to ensure the changes are visible on all
cpus.
If CONFIG_DEBUG_RODATA is not set, the kernel will be
mapped using the normal 1MB section entries.
Change-Id: I94fae337f882c2e123abaf8e1082c29cd5d483c6
Signed-off-by: Colin Cross <ccross@android.com>
Based on a rough patch by frank.rowand@am.sony.com
Since ARM doesn't have an NMI (fiq's are not always available),
send an IPI to all other CPUs (current cpu prints the stack directly)
to capture a backtrace.
Change-Id: I8b163c8cec05d521b433ae133795865e8a33d4e2
Signed-off-by: Dima Zavin <dima@android.com>
ARM errata 727915 for PL310 has been updated to include a new
workaround required for PL310 r2p0 for l2x0_flush_all, which also
affects l2x0_clean_all in my testing. For r2p0, clean or flush
each set/way individually. For r3p0 or greater, use the debug
register for cleaning and flushing.
Requires exporting the cache_id, sets and ways detected in the
init function for later use.
Change-Id: I215055cbe5dc7e4e8184fb2befc4aff672ef0a12
Signed-off-by: Colin Cross <ccross@android.com>
get_loadavg doesn't work as intended. According to the comments, it
should be returning an average over a few seconds, but it is actually
reading the instantaneous load. It is almost always returning 0, but
can sometimes, depending on workload, spike very high into the hundreds
even when the average cpu load is under 10%. Disable it for now.
Change-Id: I63ed100af1cf9463549939b8113ed83676db5f86
Signed-off-by: Colin Cross <ccross@android.com>
If the console_lock was held while the system was rebooted, the messages
in the temporary logbuffer would not have propogated to all the console
drivers.
This force releases the console lock if it failed to be acquired.
Change-Id: I193dcf7b968be17966833e50b8b8bc70d5d9fe89
Signed-off-by: Dima Zavin <dima@android.com>
Prints the time spent in suspend in the kernel log, and
keeps statistics on the time spent in suspend in
/sys/kernel/debug/suspend_time
Change-Id: Ia6b9ebe4baa0f7f5cd211c6a4f7e813aefd3fa1d
Signed-off-by: Colin Cross <ccross@android.com>
Signed-off-by: Todd Poynor <toddpoynor@google.com>
At times, it is necessary for boards to provide some additional information
as part of panic logs. Provide information on the board hardware as part
of panic logs.
It is safer to print this information at the very end in case something
bad happens as part of the information retrieval itself.
To use this, set global mach_panic_string to an appropriate string in the
board file.
Change-Id: Id12cdda87b0cd2940dd01d52db97e6162f671b4d
Signed-off-by: Nishanth Menon <nm@ti.com>
Prints the name of the first action for a pending wakeup IRQ.
Change-Id: I36f90735c75fb7c7ab1084775ec0d0ab02336e6e
Signed-off-by: Todd Poynor <toddpoynor@google.com>
vfp_pm_suspend should save the VFP state in suspend after
any lazy context switch. If it only saves when the VFP is enabled,
the state can get lost when, on a UP system:
Thread 1 uses the VFP
Context switch occurs to thread 2, VFP is disabled but the
VFP context is not saved
Thread 2 initiates suspend
vfp_pm_suspend is called with the VFP disabled, and the unsaved
VFP context of Thread 1 in the registers
Modify vfp_pm_suspend to save the VFP context whenever
vfp_current_hw_state is not NULL.
Change-Id: I91f29722d256a3afc1cc04df8b227541434ccffb
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Barry Song <bs14@csr.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Colin Cross <ccross@android.com>
If the PC on the stack is updated in entry-armv.S,
do_undefinstr can get called after the fixup. do_undefinstr
does its own fixup, and doing both causes the PC to point to
half way through an instruction.
Instead, do the fixup in do_vfp, where only the vfp code
can get called.
Change-Id: I6d966887adc8ed58d88bfe0cb3c0ba29213be488
Signed-off-by: Colin Cross <ccross@android.com>
This is extremely useful in diagnosing remote crashes, and is based heavily
on original work by <md@google.com>.
Signed-off-by: San Mehat <san@google.com>
Cc: Michael Davidson <md@google.com>
[ARM] process: Use uber-safe probe_kernel_address() to read mem when dumping.
This prevents the dump from taking pagefaults / external aborts.
Signed-off-by: San Mehat <san@google.com>
Rather than hard-lock the kernel, dump the suspend thread stack and
BUG() when a driver takes too long to suspend. The timeout is set
to 12 seconds to be longer than the usbhid 10 second timeout.
Exclude from the watchdog the time spent waiting for children that
are resumed asynchronously and time every device, whether or not they
resumed synchronously.
Change-Id: Ifd211c06b104860c2fee6eecfe0d61774aa4508a
Original-author: San Mehat <san@google.com>
Signed-off-by: Benoit Goby <benoit@android.com>
Set the GENHD_FL_EXT_DEVT flag, which will allocate minor numbers
in major 259 for partitions past disk->minors.
Also remove the use of disk_devt to determine devidx from md->disk.
md->disk->first_minor is always initialized from devidx and can
always be used to recover it.
Signed-off-by: Colin Cross <ccross@android.com>
We can't be holding the mmap_sem while calling flush_cache_user_range
because the flush can fault. If we fault on a user address, the
page fault handler will try to take mmap_sem again. Since both places
acquire the read lock, most of the time it succeeds. However, if another
thread tries to acquire the write lock on the mmap_sem (e.g. mmap) in
between the call to flush_cache_user_range and the fault, the down_read
in do_page_fault will deadlock.
Also, since we really can't be holding the mmap_sem while calling
flush_cache_user_range AND vma is actually unused by the flush itself,
get rid of vma as an argument.
Change-Id: If55409bde41ad1060fa4fe7cbd4ac530d4d9a106
Signed-off-by: Dima Zavin <dima@android.com>
Pull two more small regmap fixes from Mark Brown:
- Now we have users for it that aren't running Android it turns out
that regcache_sync_region() is much more useful to drivers if it's
exported for use by modules. Who knew?
- Make sure we don't divide by zero when doing debugfs dumps of
rbtrees, not visible up until now because everything was providing at
least some cache on startup.
* tag 'regmap-3.4-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap: prevent division by zero in rbtree_show
regmap: Export regcache_sync_region()
Pull a few KVM fixes from Avi Kivity:
"A bunch of powerpc KVM fixes, a guest and a host RCU fix (unrelated),
and a small build fix."
* 'kvm-updates/3.4' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: Resolve RCU vs. async page fault problem
KVM: VMX: vmx_set_cr0 expects kvm->srcu locked
KVM: PMU: Fix integer constant is too large warning in kvm_pmu_set_msr()
KVM: PPC: Book3S: PR: Fix preemption
KVM: PPC: Save/Restore CR over vcpu_run
KVM: PPC: Book3S HV: Save and restore CR in __kvmppc_vcore_entry
KVM: PPC: Book3S HV: Fix kvm_alloc_linear in case where no linears exist
KVM: PPC: Book3S: Compile fix for ppc32 in HIOR access code
Pull SuperH fixes from Paul Mundt.
* tag 'sh-for-linus' of git://github.com/pmundt/linux-sh:
sh: fix clock-sh7757 for the latest sh_mobile_sdhi driver
serial: sh-sci: use serial_port_in/out vs sci_in/out.
sh: vsyscall: Fix up .eh_frame generation.
sh: dma: Fix up device attribute mismatch from sysdev fallout.
sh: dwarf unwinder depends on SHcompact.
sh: fix up fallout from system.h disintegration.
