The next generation of content protection has separate SCM
calls into TZ. Add these functions in a dedicated file so they
can be used by any Ion heap.
Change-Id: I197130f6a5fc33efcd6871b0f7c362fa99f18d20
Signed-off-by: Laura Abbott <lauraa@codeaurora.org>
Needed on 8x30 MTP/MDP platforms, where interrupt line polled up and
does not work with driver's default configuration
Change-Id: I4827c7a1f7df147245336d18523088c013381f1e
Signed-off-by: Wentao Xu <wentaox@codeaurora.org>
This change provides support to raise the clks to turbo mode for mpeg4
clips with high number of slices. The firmware performance degrades if
the number of slices is more than 10. Without this fix, we see lot of
frame drops happening, causing a freeze effect.
Change-Id: Ia897854ef6d30bb97cd37810b22eb1ab5ad818fb
CRs-Fixed: 358615
Signed-off-by: Arun Menon <menon@codeaurora.org>
Provide interfaces to allow host to update the SPUR Table
with newly found spur frequencies and their RMSSI values.
CRs-Fixed: 352591
Change-Id: I84f296ea313971cc1995c644d604f96581be5f7f
Signed-off-by: Anantha Krishnan <ananthk@codeaurora.org>
Adds events for video codecs so that clients can be
notified of important events asynchronously.
Change-Id: I0177bdc6249306ed580aca5ec2ed434174a57ba7
Signed-off-by: Vinay Kalia <vkalia@codeaurora.org>
With commit c84f15ae, the default clock gating delay in mmc host
init is set to zero. For MSM targets this can cause huge
performance hit as sometimes the clocks are non-local and
requires a request to other subsystem leading to significant
roundtrip delay.
Fix this to have atleast 200msecs delay in turning off the sdcc
clocks after a request is completed.
Change-Id: I5f434cf98373154d817735dba8f5bc8810d27611
Signed-off-by: Sujit Reddy Thumma <sthumma@codeaurora.org>
This change add support in ci13xxx_msm_hsic driver and
ehci-msm-hsic driver for VDDCX corner voting.
In case a VDDCX corner resource is supported by the platform,
it will be used. Else, the legacy voting for specific voltage
level will be used.
Change-Id: Iae91d1c945f9b61340628b2fc7c7727e4cca6a1e
CRs-Fixed: 354458
Signed-off-by: Amit Blay <ablay@codeaurora.org>
Signed-off-by: David Collins <collinsd@codeaurora.org>
There is a dependency for the CCADC calibration work on the BMS
driver. This prevents some devices that do not use the BMS
to utilize the CCADC.
Remove this dependency by moving the ccadc calibration
work to the CCADC driver to avoid this.
Change-Id: If43c781d6d2bc27f64dbbe594b6e81c5a5642f0b
Signed-off-by: David Keitel <dkeitel@codeaurora.org>
- Implements Linux frame buffer interface to interact with userspace
libraries and applications, based on msm_fb frame buffer.
- Implement MDP driver which handles MDP core data path setup and
hardware blocks programming.
- Support for UI through Linux frame buffer FBIOPAN_DISPLAY ioctl.
Change-Id: Ib98677b8d81d74283b27dea08a9f1a705c101bce
Signed-off-by: Adrian Salido-Moreno <adrianm@codeaurora.org>
Ispif is a separate hardware block. Decouple
it from sensors so that it can be controlled for various
camera usecases.
Change-Id: I539fcb4166edc7a14d15a94c2f7f56b2f196a971
Signed-off-by: Nishant Pandit <npandit@codeaurora.org>
The ion dev fd field is required to represent the client
that allocated the buffer represented by the frame.
Change-Id: I8de791158251069275becc9f6413382fc6738492
Signed-off-by: Ankit Premrajka <ankitp@codeaurora.org>
Remove tzcom driver components that includes files,
clock definitions. Currently tzcom driver has been replaced
by qseecom driver.
Change-Id: I1832d921a7b949057b84a7e0aa9afaa445be5194
Signed-off-by: Ramesh Masavarapu <rameshm@codeaurora.org>
To save power regulators are only powered on when needed. Also in
this change is that clock rate is not longer set to max rate.
Clock speed set to lowest rate and still remain properly functional
Change-Id: I7141c8d630e4dbf5c2593e0aea9a18dc3866a1fd
Signed-off-by: Terence Hampson <thampson@codeaurora.org>
This will allow client to subscribe and receive events regarding
VCAP device
Change-Id: If8b6723feaa29dcf4e6a3bb9275ccc776081c830
Signed-off-by: Terence Hampson <thampson@codeaurora.org>
The WCD9320 Codec Driver is an ALSA-compliant codec driver. This driver
constructs the internal codec audio paths with DAPM widgets and
controls and provides the controls to the upper layers to enable and
configure audio paths.
Change-Id: Iee29359bebfc838cd200732b7191a2eb6a2087ee
Signed-off-by: Kiran Kandi <kkandi@codeaurora.org>
Add private ioctls s_ctrl, query_ctrl where
we need to get ctrl data from userspace.
Change-Id: I404236d072bafb3ef6ef3c0723a707f5805fe92b
Signed-off-by: Kevin Chan <ktchan@codeaurora.org>
Currently VPE hardware is being controlled through
the config node. Since it is converted into a V4L2
subdevice, we could control it directly from
userspace by issuing open, close and ioctl system
calls.
The ACK from VPE hardware shall be routed directly
to userspace by putting the ACK event on the v4l2
event queue.
Change-Id: I7f82a750a28732382627349da362dbee8e27b149
Signed-off-by: Kiran Kumar H N <hurlisal@codeaurora.org>
QMI Server lookup returns only node_id and port_id. This information is
not sufficient when the QMI clients look for a specific instance of a
service. Hence the server lookup routine returns the instance ID along
with the server address information.
Change-Id: I644e6c8bb9dc3108c0198b7779ef277aa65f7bc5
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@codeaurora.org>
Drivers can now create alarms that will use an hrtimer while the
system is running and the rtc to wake up from suspend.
Signed-off-by: Arve Hjønnevåg <arve@android.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
ASoC core will scan for path, get the list of widgets
when playback and capture is started.When a mixer
command is issued it needs to scan only the path
to find if back end or front end dai needs to be shutdown.
Change ehances asoc core path finding functionality
to provide support for different usecases.
Signed-off-by: Gopikrishnaiah Anandan <agopik@codeaurora.org>
Change the wigdet power up and power down sequnce
in the ASOC as per msm platform requirements.
Signed-off-by: Gopikrishnaiah Anandan <agopik@codeaurora.org>
When hardware params are set for the session alsa
core will query for the RX/TX channels for the
current back end dai.
Signed-off-by: Gopikrishnaiah Anandan <agopik@codeaurora.org>
Hostless PCM nodes will not exchange data with
the userspace clients.Control paths will
be setup by userspace clients.
Signed-off-by: Gopikrishnaiah Anandan <agopik@codeaurora.org>
The Dynamic PCM core allows digital audio data to be dynamically
routed between different ALSA PCMs and DAI links on SoC CPUs with
on chip DSP devices. e.g. audio data could be played on pcm:0,0 and
routed to any (or all) SoC DAI links.
Dynamic PCM introduces the concept of Front End (FE) PCMs and Back
End (BE) PCMs. The FE PCMs are normal ALSA PCM devices except that
they can dynamically route digital audio data to any supported BE
PCM. A BE PCM has no ALSA device, but represents a DAI link and it's
substream and audio HW parameters.
Signed-off-by: Gopikrishnaiah Anandan <agopik@codeaurora.org>
Change creates a PCM stream for ASOC backend which will only be used
internally by kernel drivers.It provides existing ASoC components
drivers with a substream and access to any private data.
Current implementation decides the card type exclusively. Even though
eMMC device can support both HS200 and DDR mode, card type will be
set only for HS200. If the host doesn't support HS200 but has DDR
capability, then DDR mode can't be selected.
Change-Id: Ifb5bb7fb0b7f4472734e10ec39d47e3f12e32cf8
Signed-off-by: Seungwon Jeon <tgih.jun@samsung.com>
Reviewed-by: Subhash Jadavani <subhashj@codeaurora.org>
Signed-off-by: Chris Ball <cjb@laptop.org>
Signed-off-by: Subhash Jadavani <subhashj@codeaurora.org>
This bug was introduced in the 'MMC-4.5 Power OFF Notify Rework' fix.
Prior to the aforementioned patch, during resume mmc_init_card was being
invoked. The aforesaid patch invokes mmc_card_awake, prior to which
mmc_power_up has already set the clock frequency to 400Khz. Since the card
init is not done again, this frequency stays as is and results in data
time-out errors.
Two new functions
* mmc_save_ios
* mmc_restore_ios
were added.
The mmc_save_ios is invoked during mmc_suspend process and it saves the
current ios values, while mmc_restore_ios is invoked during mmc_resume process
and restores the previous ios values before sending the awake command. This
ensures that the clock, timing, bus-width etc are set properly before any
request is sent to the driver.
Signed-off-by: Asutosh Das <asutoshd@codeaurora.org>
This is a rework of the existing POWER OFF NOTIFY patch. The current problem
with the patch comes from the ambiguity on the usage of POWER OFF NOTIFY
together with SLEEP and misunderstanding on the usage of MMC_POWER_OFF
power_mode from mmc_set_ios in different host controller drivers.
This new patch works around this problem by adding a new host CAP,
MMC_CAP2_POWER_OFF_VCCQ_DURING_SUSPEND, which when set sends a
POWER OFF NOTIFY from mmc_suspend instead of SLEEP. It is expected that host
controller drivers will set this CAP, if they switch off both Vcc and Vccq
from MMC_POWER_OFF condition within mmc_set_ios. However, note that there
is no harm in sending MMC_POWER_NOTIFY even if Vccq is not switched off.
This patch also sends POWER OFF NOTIFY from power management routines (e.g.
mmc_power_save_host, mmc_pm_notify/PM_SUSPEND_PREPARE, mmc_stop_host), which
does reinitialization of the eMMC on the return path of the power management
routines (e.g. mmc_power_restore_host, mmc_pm_notify/PM_POST_RESTORE,
mmc_start_host).
This patch sets POWER_OFF_NOTIFICATION to POWER_OFF_SHORT if it is sent from
the suspend sequence. If it is sent from shutdown sequence then it is set to
POWER_OFF_LONG.
Earlier implementation of PowerOff Notify as a core function is replaced as
a device's bus operation.
Signed-off-by: Saugata Das <saugata.das@linaro.org>
Signed-off-by: Girish K S <girish.shivananjappa@linaro.org>
changes in v5:
modified the the handling of return value in mmc_poweroff_notify.
changes in v4:
As suggested in review,
- Moved mmc_can_poweroff_notify to core.c
- Moved mmc_claim_host, mmc_release_host outside mmc_poweroff_notify
- Added check for wrong initialization for poweroff_notify_type
- mmc_poweroff_notify is modified to take as 2nd parameter
changes in v3:
This version addresses the review comments given by Subhash and Ulf
changes in v2:
This version addresses the changes suggested by Ulf
[smuckle@codeaurora.org: resolve minor merge conflicts]
Signed-off-by: Steve Muckle <smuckle@codeaurora.org>
The write packing statistics are used for the packed commands unit tests
in order to determine test success or failure
Change-Id: I1b330033e59a775c64fb915038d58615aff0dbdd
Signed-off-by: Maya Erez <merez@codeaurora.org>
The write packing control will ensure that read requests latency is
not increased due to long write packed commands.
The trigger for enabling the write packing is managing to pack several
write requests. The number of potential packed requests that will trigger
the packing can be configured via sysfs by writing the required value to:
/sys/block/<block_dev_name>/num_wr_reqs_to_start_packing.
The trigger for disabling the write packing is fetching a read request.
Change-Id: I982170fa6dca9150ea4310bb546b838b7fd30e9b
Signed-off-by: Maya Erez <merez@codeaurora.org>
This patch supports packed write command of eMMC4.5 device.
Several writes can be grouped in packed command and all data
of the individual commands can be sent in a single transfer
on the bus.
Change-Id: I391c3e5f73b785a8b7d25eb8256051020cfb0631
Signed-off-by: Seungwon Jeon <tgih.jun@samsung.com>
Signed-off-by: Maya Erez <merez@codeaurora.org>
Enable eMMC background operations (BKOPS) feature.
If URGENT_BKOPS is set after a response, note that BKOPS
are required. After all I/O requests are finished, run
BKOPS if required. Should read/write operations be requested
during BKOPS, first issue HPI to interrupt the ongoing BKOPS
and then service the request.
If BKOPS-STATUS is upper than LEVEL2, need to check until clear
the BKOPS-STATUS vaule.
If you want to enable this feature, set MMC_CAP2_BKOPS.
And if you want to set the BKOPS_EN bit in ext_csd register,
use the MMC_CAP2_INIT_BKOPS.
Future considerations
* Check BKOPS_LEVEL=1 and start BKOPS in a preventive manner.
* Interrupt ongoing BKOPS before powering off the card.
* How get BKOPS_STATUS value.(periodically send ext_csd command?)
Change-Id: Ia679c661a282072a7e54d10fc59d8ec1cbecae96
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Konstantin Dorfman <kdorfman@codeaurora.org>
This feature delete the unmap memory region of the eMMC card,
by writing to a specific register in the EXT_CSD
unmap region is the memory region that were previously deleted
(by erase, trim or discard operation)
Change-Id: I7f1df8e87fb782979fd90e064eca00704caca54b
Signed-off-by: Yaniv Gardi <ygardi@codeaurora.org>
Signed-off-by: Maya Erez <merez@codeaurora.org>
This patch adds packed command feature of eMMC4.5.
The maximum number for packing read(or write) is offered
and exception event relevant to packed command which is
used for error handling is enabled. If host wants to use
this feature, MMC_CAP2_PACKED_CMD should be set.
Change-Id: I8013970fc9d54da7d92b0aca2bb0746189b9825b
Signed-off-by: Seungwon Jeon <tgih.jun@samsung.com>
Signed-off-by: Maya Erez <merez@codeaurora.org>
mmcq performance numbers are not captured since asynchronous
MMC request support got added in MMC block driver. So printing
out these numbers (which are all zeros) just adds confusion.
This patch removes the printing of mmcq performance numbers
statistics.
CRs-Fixed: 364206
Change-Id: I7213b11c8e9e055894c9902af7e975de3be1c519
Signed-off-by: Subhash Jadavani <subhashj@codeaurora.org>
Commit 06e8935feb ("optimized SDIO IRQ handling for single irq")
introduced some spurious calls to SDIO function interrupt handlers,
such as when the SDIO IRQ thread is started, or the safety check
performed upon a system resume. Let's add a flag to perform the
optimization only when a real interrupt is signaled by the host
driver and we know there is no point confirming it.
Change-Id: Ibfd6b35589b15fabea7b1c18dfa2197a78866b61
Reported-by: Sujit Reddy Thumma <sthumma@codeaurora.org>
Signed-off-by: Nicolas Pitre <nico@linaro.org>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Chris Ball <cjb@laptop.org>
Signed-off-by: Sujit Reddy Thumma <sthumma@codeaurora.org>
Some INAND MCP devices advertise incorrect data timeout values.
This leads to data timeout errors on the platform. So, add a quirk
for such devices to facilitate proper functionality.
CRs-Fixed: 355347
Change-Id: If4fdd2724dc407450da8529222efca7ee94f50df
Signed-off-by: Pratibhasagar V <pratibha@codeaurora.org>
Currently performance numbers are captured for each SDCC
transfers unconditionally which may add the overhead and
could reduce the SDCC read/write throughput numbers.
This change adds additional control for enabling/disabling the
capturing of performance numbers at runtime. We already have sysfs
entry named "perf" for msm sdcc devices. Currently setting this
entry to 0 clears the performance statistics. But now we are
changing the definition of this entry as mentioned below:
Disable performance capturing and clear the performance statistics:
"echo 0 > /sys/devices/platform/msm_sdcc.<n>/perf"
Enable performance capturing:
"echo 1 > /sys/devices/platform/msm_sdcc.<n>/perf"
CRs-fixed: 345170
Change-Id: I3ab9288fd87cc8a8ada6c0c3d066cac4f68d79b7
Signed-off-by: Subhash Jadavani <subhashj@codeaurora.org>
mmc_set_ios() is used by host drivers during suspend/resume
routines in indirect way i.e., by calling host->ops->set_ios().
But now with MMC_CLKGATE enabled, mmc_set_ios() also updates
host->clk_gated flag. So export this API so that host controller
drivers can use it.
Change-Id: Ib0c177635bb8d87ba68c98e08b8d940c73f2b80c
Signed-off-by: Sujit Reddy Thumma <sthumma@codeaurora.org>
MMC core reads SEC_COUNT information from EXT_CSD register and assumes
that the card supports sector access mode. Some eMMC cards (<=2GB) do not
support this mode even though they have SEC_COUNT value defined, causing
failure while populating extended partitions. Sector/Byte access mode
information is stored in OCR register. Hence, read OCR bit 30 and then
confirm it with SEC_COUNT value to know whether the card supports sector
access mode or byte access mode.
Change-Id: Ifdfff35309e8667cd2c2ac2761b9a708d5b785d3
Signed-off-by: Sujith Reddy Thumma <sthumma@codeaurora.org>
There is a possible race with mmc_claim_host() in mmc_sd_suspend()/
mmc_suspend() and mmc_claim_host() in mmc_blk_issue_rq() when runtime
pm is enabled. Fix this by blocking processing of requests until the
previous runtime suspend is processed and then resume as part of
msmsdcc_enable(). Previous fix has card detection failure as a side effect
during resume.
Change-Id: I9cb31269638d9db4e630eb22b973a5335af1bda4
Signed-off-by: Sujith Reddy Thumma <sthumma@codeaurora.org>
[sboyd: Dropped msm driver change]
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Profiling code is added to measure read, write times for
the MMC requests at various MMC layers. Profiling is done
at the MMC queue and at the driver level. This information
can be viewed through a sysfs entry called perf.
Change-Id: I7c65bfe25a1f7774e3a9abf1f9539e690b3718ec
Signed-off-by: Aparna Mallavarapu <aparnam@qualcomm.com>
Signed-off-by: Rebecca Schultz <rschultz@google.com>
pmem: Use the thread group leader insted of the current thread.
Instead of keeping track of the current thread, use the thread group leader
Signed-off-by: Rebecca Schultz <rschultz@google.com>
pmem: Add some apis to reference and flush pmem files by file struct
The api to refer to pmem files by fd should be depricated, it can
cause problems if a processes fd table changes while the kernel is processing
data in a pmem file. This change adds the safer api.
Signed-off-by: Rebecca Schultz Zavin <rebecca@android.com>
pmem: Remove unused depricated fd api to pmem.
Signed-off-by: Rebecca Schultz Zavin <rebecca@android.com>
pmem: Remove error message when calling get_pmem_addr
This call is used from the mdp driver to determine if the memory
is in pmem or in the fb. We will encounter this case during normal operation
so this error message should be removed.
Signed-off-by: Rebecca Schultz Zavin <rebecca@android.com>
pmem: Add include sched.h to fix compile errors
Signed-off-by: Rebecca Schultz Zavin <rebecca@android.com>
pmem: remove HW3D_* ioctls
Signed-off-by: Dima Zavin <dima@android.com>
pmem: Expose is_pmem_file to the in-kernel users.
Signed-off-by: Dima Zavin <dima@android.com>
pmem: Make the exposed functions be noops if CONFIG_ANDROID_PMEM is not set.
Signed-off-by: Dima Zavin <dima@android.com>
misc: pmem: don't flush if file was opened with O_SYNC
Change-Id: I067218658a0d7f7ecc1fe73e9ff6b0c3b3054653
Signed-off-by: Dima Zavin <dima@android.com>
