The SPM device tree entry to configure L2 SAW doesn't distinguish
between Krait and L2 SAW low power modes. Update the device tree to
differentiate between L2 and Krait low power modes.
Change-Id: I6c7cf6f8dd10478fd53826e22b17ed98d46b68b4
Signed-off-by: Mahesh Sivasubramanian <msivasub@codeaurora.org>
SMMU v2 is based off the ARM SMMU architecture specification.
The SMMUs primary purpose is to provide virtual address translation
and abstract the physical view of system memory. In doing so,
discontiguous physical memory appears virtually contiguous to
hardware cores.
The SMMU instances are now represented in device tree with each
instance having multiple translation context banks.
Change-Id: If4733500e5226984d26f1c8a97ae98603c2f75f9
Signed-off-by: Sathish Ambley <sambley@codeaurora.org>
Add device tree support for MSM HSUSB. The OTG driver registers
gadget and host platform devices based on the operational mode.
This patch also updates the copper device tree source file with
HSUSB device specifics.
Change-Id: I0a50b0500d15f32ff65468cdb411398a80a20329
Signed-off-by: Pavankumar Kondeti <pkondeti@codeaurora.org>
Add MSM USB3.0 super-speed controller.
The MSM USB3.0 controller is a wrapper of Synopsys's DesignWare
USB3.0 controller which also includes other HW units as the DBM.
The copper device-tree now includes a new device for this controller,
which will be attached to the dwc3-msm.c driver.
The dwc3-msm.c driver will be used for MSM specific operations of USB3.0
(as managing the DBM) and for now it just add in runtime a core dwc3 device
that will be attached to the dwc3/core.c driver.
Change-Id: I1e0a9144971b2de533d4d1ce7ac5f0c3584d1930
Signed-off-by: Amit Blay <ablay@codeaurora.org>
Signed-off-by: Ido Shayevitz <idos@codeaurora.org>
Extend the of_get_regulator_init_data function so that it can
parse an additional property from regulator device tree nodes
which is needed to support non-device tree consumers.
The new property is named qcom,consumer-supplies. Its value
is a list of strings of the form:
qcom,consumer-supplies = "supply_name1", "device_name1",
"supply_name2", "device_name2", ...
Change-Id: Ia689d04e6de568e6889b807eed15df3116de01d2
Signed-off-by: David Collins <collinsd@codeaurora.org>
Add the qpnp-regulator driver to support regulators found in
Qualcomm plug-and-play (QPNP) PMIC chips. QPNP chips make use of
Qualcomm's SPMI register convention. The particular hardware
characteristics of a given regulator can be derived from the
values present in the type and subtype registers.
The qpnp-regulator driver supports probing with either device tree
device specification or with board file specified platform data.
Change-Id: I4f74431a50949763d651faf992b5d2567d05758e
Signed-off-by: David Collins <collinsd@codeaurora.org>
[sboyd: Squash in DT binding document]
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
The spmi-dev-container binding is intended for SPMI
configurations that have multiple device nodes associated with
only one spmi_device. By default, if this flag is not specified,
each device node will create a new spmi_device.
Sometimes having multiple spmi_devices for SPMI device nodes is
superfluous. One example of this is gpios. In some architectures,
a single gpio is treated as a unique device. But from a gpio_chip
perspective, the chip is comprised of many gpios. Beyond wasting
memory allocating a unique spmi_device per gpio, the implication
of not coalescing spmi_devices is that the clients probe() routine
would be called N number of times. But this sort of behavior makes
it difficult to realize when a gpio_chip starts and stops. If we
assume that one gpio_chip represents one call to probe(), then
this problem is solved, since all gpios in that chip will be
passed as resources.
In order to support multiple device nodes per spmi_device, we
also need to extend the data structures for spmi_resources.
This change also makes an effort to cleanup some of the error
handling for illegal combinations of device bindings, as well as
adding some additional documentation.
Change-Id: If3ce2aaaa07bdf79e0d9fdedf16419e74a00fbec
Signed-off-by: Michael Bohan <mbohan@codeaurora.org>
Signed-off-by: David Brown <davidb@codeaurora.org>
This binding is currently used to indicate all devices existing
in the same slave. Let's change the name to be more meaningful.
The real motivation here is that we want to introduce a new
binding to specify all qpnp devices existing in the same
spmi_device. So spmi-dev-container is a more meaningful name for
that usecase, and spmi-slave-container better describes the
former.
Change-Id: I48f834b9cff9ea90d05f5e958ca21bef0ab56a86
Signed-off-by: Michael Bohan <mbohan@codeaurora.org>
Signed-off-by: David Brown <davidb@codeaurora.org>
Qualcomm's PMIC Arbiter SPMI controller functions as a bus master and
is used to communication with one or more PMIC (slave) devices on the
SPMI bus. The PMIC Arbiter is actually a hardware wrapper around the
SPMI controller that provides concurrent and autonomous PMIC access
to various entities that need to communicate with the PMIC.
The SPMI controller hardware handles all of the SPMI bus activity (bus
arbitration, sequence start condition, transmission of frames, etc).
This software driver uses the PMIC Arbiter register interface to
initiate command sequences on the SPMI bus. The status register is
read to determine when the command sequence has completed and whether
or not it completed successfully.
Request Capable Slave (RCS) devices can initiate a master write
command sequence on the SPMI bus that the can be decoded by the
bus master and used to generate interrupts.
Change-Id: I037fefc946ccb5b8e0b04da856a3a96effe1c7e4
Signed-off-by: Kenneth Heitke <kheitke@codeaurora.org>
Signed-off-by: David Brown <davidb@codeaurora.org>
This change adds SPMI Device Tree parsing. The
of_spmi_register_devices() API should be called from the probe()
routine of each SPMI controller to parse the subtree and add the
respective SPMI devices.
The SPMI subtree is nested up to two levels deep. The first level
is the most basic and treats the address as the SPMI slave ID.
This should be used for simple devices that has no notion of
segmented SPMI address spaces.
An optional second level specifies the address as an offset
within the outer layer's slave ID. This is used to specify
multiple devices on the same slave ID that have different address
ranges. In fact, it's reasonable to specify any number of address
ranges at this level.
Devices can also specify any number of interrupts that's decoding
is done by an external interrupt device.
Sections of this code were taken from drivers/of/platform.c.
Change-Id: Ib9f06764a9bd85e3b2aab43b72aa7132885aa044
Signed-off-by: Michael Bohan <mbohan@codeaurora.org>
Signed-off-by: David Brown <davidb@codeaurora.org>
Including the following patches:
commit 0f7723bb09440ae69743fed38cf558a838aa9bdf
Author: Bryan Huntsman <bryanh@codeaurora.org>
Date: Thu Oct 6 23:13:56 2011 -0700
Revert "spi_qsd: GPIO configuration changes for SPI chip-select line"
This reverts commit 7eaa08b75995289a91c7dd1f3616f79227f5f923.
Signed-off-by: Bryan Huntsman <bryanh@codeaurora.org>
commit 7eaa08b75995289a91c7dd1f3616f79227f5f923
Author: Harini Jayaraman <harinij@codeaurora.org>
Date: Wed Sep 28 16:26:39 2011 -0600
spi_qsd: GPIO configuration changes for SPI chip-select line
The chip-select GPIO's pertaining to each slave remains in suspended
configuration until the first transfer is intiated by the slave.
Change-Id: I3aa8555289be7ce457b91a969cf03909be0965d7
Signed-off-by: Harini Jayaraman <harinij@codeaurora.org>
commit e47df9f9b932968152ab2908153e60adab4402d7
Author: Jordan Crouse <jcrouse@codeaurora.org>
Date: Mon Sep 19 11:21:16 2011 -0600
spi_qsd: Fix possible uninitialized variable
Change-Id: Ic0dedbad184046e9835cde015ad5d592f33e82a6
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
commit 4ae02c76b98f2b96bfb8c4fa02f40cfda2f16f97
Author: Harini Jayaraman <harinij@codeaurora.org>
Date: Tue Sep 20 17:28:50 2011 -0600
spi_qsd: Fix Klocwork errors in SPI driver
Change-Id: I1fe6632e68ea625966aced37a1b140b30534e101
Signed-off-by: Harini Jayaraman <harinij@codeaurora.org>
commit 52e065ba3d86977b59937693ac7e85836cf4eca8
Author: Harini Jayaraman <harinij@codeaurora.org>
Date: Thu Sep 1 12:12:58 2011 -0600
spi_qsd: Fix for SPI Operational State Invalid error
This error is reproted randomly when the SPI core is put
into RUN state and occurs when the ACPU clock is low.
When the timer expires, we check again to ensure that the
STATE_VALID bit is set before returning.
Change-Id: Ic8912534f4924efd999b8aa1d75a9fd19749e870
CRs-fixed: 304672
Signed-off-by: Harini Jayaraman <harinij@codeaurora.org>
commit a9a8816913e5466e06b443c42cbf8ae866b95fd1
Author: Jeff Ohlstein <johlstei@codeaurora.org>
Date: Fri Sep 2 13:55:16 2011 -0700
msm: dma: remove crci conflict checking
The crci conflict checking code was designed for a system where a crci's
mux could be changed at runtime. In reality, our chips configure these
statically, so it is not necessary.
Change-Id: I4d5f32cd8728d3c78fca8f64aed0e02b57b6afba
Signed-off-by: Jeff Ohlstein <johlstei@codeaurora.org>
commit 36c6f1bb48af3e65db281cc7ccb913a8e81a598e
Author: Matt Wagantall <mattw@codeaurora.org>
Date: Wed Aug 17 15:44:58 2011 -0700
msm: clock: Rename all I2C/SPI clocks to 'core_clk' or "iface_clk"
Drivers should now use their device names to distinguish between
clocks of the same type rather than the clock name.
Change-Id: Iab12caf4eab163773d68f1b2adc1bb4c72c69e83
Signed-off-by: Matt Wagantall <mattw@codeaurora.org>
commit 55e656e68cac78eaa367341df2e693a483a53f84
Author: Stepan Moskovchenko <stepanm@codeaurora.org>
Date: Mon Jun 6 14:34:38 2011 -0700
drivers: barriers: Replace dsb() with mb()
Replace explicit dsb() calls with mb(). Now that the
generic ARM implementation defines mb() to mean (at least)
dsb(), it is appropriate to switch back to the generic
kernel version of the barriers. This is also needed for
correctness on certain targets (such as 7x27) where dsb()
is insufficient and other operations (such as outer cache
sync or writing to strongly-ordered memory) are required to
ensure proper I/O operations ordering. In some cases,
remove explicit calls to outer_sync following a barrier
since the barrier will now have an explicit outer_sync
call.
Change-Id: I2c53b8534af9c3cbac4d4d77b322f897a39e7758
Signed-off-by: Stepan Moskovchenko <stepanm@codeaurora.org>
commit 17194a32164b868f80ce84e313f9148d1dc77e7b
Author: Harini Jayaraman <harinij@codeaurora.org>
Date: Fri Jun 3 18:10:09 2011 -0600
spi_qsd: GPIO configuration changes
On suspend, the SPI related GPIO's enter a low power configuration
and on resume they move to an active configuration. This helps
conserving power during power collapse.
Change-Id: I0911867e10fadcfc6950f6dddf74226bd6321c16
Signed-off-by: Harini Jayaraman <harinij@codeaurora.org>
commit 1777d88688511cd59bad7674c6a2246e0c93142b
Author: Harini Jayaraman <harinij@codeaurora.org>
Date: Wed Jun 1 16:54:07 2011 -0600
spi_qsd: Remove restriction on SPI clock speed.
When multiple slaves are connected to the SPI controller,
the driver does not allow the clock to go from lower speed
to a higher speed. This restriction is not required since
there can only be one slave listening at a time. Also,
there are no hardware limitations in doing so.
Change-Id: I4ecabfb3a1515416f050c18678cf0987dcde9d1e
CRs-fixed: 290127
Signed-off-by: Harini Jayaraman <harinij@codeaurora.org>
commit 4b7c7bfc546cb02141da9d034421aefe5635f857
Author: Harini Jayaraman <harinij@codeaurora.org>
Date: Tue Jun 7 14:18:42 2011 -0600
spi_qsd: Add null pointer check before dereferencing
During probe, there is no cur_msg to set the status.
Change-Id: I82e00b9d74d45c36b70078b171db1bb150d1bfac
Signed-off-by: Harini Jayaraman <harinij@codeaurora.org>
commit bf514c766fcc2bdee680f80a2ea16c7fead0be96
Author: Stepan Moskovchenko <stepanm@codeaurora.org>
Date: Mon May 16 13:37:11 2011 -0700
msm: spi: Fix access to unclocked registers
Don't program the GSBI configuration until the clocks have
been turned on.
Change-Id: Idee5f5dffcb5ed0f7de18f1e508ee8c76b618894
Signed-off-by: Stepan Moskovchenko <stepanm@codeaurora.org>
commit d9c248213f4cd025f3d3586f0de81e4bc44a5a54
Author: Harini Jayaraman <harinij@codeaurora.org>
Date: Mon May 16 16:43:08 2011 -0600
spi_qsd: Fix for SPI input overrun error
This error occurs due to a bug in the controller.
This bogus error is reported when a transition from run
to reset state occurs and if the input FIFO has an odd number
of entries.
Change-Id: I555864d4855ac6d416997da69d8bc6aee7a82178
Signed-off-by: Harini Jayaraman <harinij@codeaurora.org>
commit e99ceb5b3da7bec51be853809c25df8e32b2c1e6
Author: Harini Jayaraman <harinij@codeaurora.org>
Date: Thu Apr 14 18:36:34 2011 -0600
spi_qsd: Multi-transfer handling
When there are mulitple SPI transfers in a message, we
default to using FIFO mode for all the transfers. As special
case, we handle a WR-WR or WR-RD transfer where we choose
between FIFO mode and DM mode based on the total length of
the transaction.
Change-Id: I6fbc1a06a22f9782db5b97c9b87cc53392a8c2fa
CRs-fixed: 276666
Signed-off-by: Harini Jayaraman <harinij@codeaurora.org>
commit 8f3d3aaa51603a929027bc820fe2d3515e959779
Author: Harini Jayaraman <harinij@codeaurora.org>
Date: Tue Apr 19 14:19:29 2011 -0600
spi_qsd: Ensure IO operation ordering
Adding memory barriers to ensure that the writes and reads
to the SPI and QUP registers happen in the correct order.
Change-Id: I86d8f63b0e9547a2339ee4ab5c713cf8864fef04
Signed-off-by: Harini Jayaraman <harinij@codeaurora.org>
commit 36b3fae5f54230cd1e4ca072d1f55cb2f79d8945
Author: Laura Abbott <lauraa@codeaurora.org>
Date: Thu Oct 14 12:48:16 2010 -0700
spi_qsd: Fix section mismatch
The function msm_spi_probe is referenced outside of the __init section.
This fixes the problem by calling platform_driver_probe instead of
platform_driver_register since this device is not hotplugable.
Change-Id: I3a563c6fc562ada959317b54ff60a38f9ce517d8
Signed-off-by: Laura Abbott <lauraa@codeaurora.org>
commit dc2e36eecefb6628031afeff28afd9d97f2f3f6f
Author: Harini Jayaraman <harinij@codeaurora.org>
Date: Wed Sep 29 16:58:20 2010 -0600
spi_qsd: Changes to support DM mode.
The dma_config function may not always be present.
This change makes sure the driver gets DM resources
irrespective of the dma_config function.
Change-Id: I25a2497d20e973f22b76f2b5d6f68c86bd4d5f1d
Signed-off-by: Harini Jayaraman <harinij@codeaurora.org>
commit a39bd4a398674c320925540eec91d94d2b7d53f3
Author: Harini Jayaraman <harinij@codeaurora.org>
Date: Thu Aug 19 17:48:01 2010 -0600
spi_qsd: Modify timeout mechanism to check SPI state valid bit.
In order to allow sufficient time for the SPI state
transition to occur, calculate the timeout based on
the SPI clock speed.
Change-Id: I3d6955b2a64a8bf8980590e352fbd564250210fb
CRs-fixed: 250998
Signed-off-by: Harini Jayaraman <harinij@codeaurora.org>
commit b5887b644ba9545672d637985713c7e0e2e5bb50
Author: Harini Jayaraman <harinij@codeaurora.org>
Date: Tue Aug 3 16:57:33 2010 -0600
spi_qsd: Use FIFO mode when DM mode configuration fails.
When the Data Mover configuration fails, the driver
uses FIFO mode.
Change-Id: Iaf83e50fe725654c58260c5cd1150cdeb56f51c8
CRs-fixed: 249238
Signed-off-by: Harini Jayaraman <harinij@codeaurora.org>
commit ced8ad320d480006643a3aa3474f5c0d77457454
Author: Harini Jayaraman <harinij@codeaurora.org>
Date: Mon Jun 28 16:01:33 2010 -0600
spi_qsd: Use SW timeout instead of SPI_TIME_OUT register.
Since the software timeout is already present in the driver,
the hardware SPI_TIME_OUT register is being removed.It is just
redundant and used only for debugging purposes.
Change-Id: I829cb944444fc3e5053bc810adffe2b87f511b63
Signed-off-by: Harini Jayaraman <harinij@codeaurora.org>
commit 35e9155f59317e8ef63b8ce5190f26f5cae6a8ee
Author: Harini Jayaraman <harinij@codeaurora.org>
Date: Fri Jun 25 16:48:25 2010 -0600
spi_qsd: Disable irqs in the probe function.
The irqs are disabled at all times in the probe function
irrespective of the use of remote lock.
Change-Id: I0997d07b93c97a12bca6d80a9bba59682b1bec3e
Signed-off-by: Harini Jayaraman <harinij@codeaurora.org>
commit e6af92d74a35ba267125bc61c2c6c18034c03af3
Author: Harini Jayaraman <harinij@codeaurora.org>
Date: Tue Jun 22 12:20:46 2010 -0600
spi_qsd: Disable clocks and irqs when SPI bus is not in use.
The SPI clocks and irqs are enabled per workqueue and correspondingly
disabled once the workqueue is completed.
Change-Id: Ib22b7e3b946eb4c829940e43327caaf5aff7721b
CRs-fixed: 242866
Signed-off-by: Harini Jayaraman <harinij@codeaurora.org>
commit b25e4220efdacc231cb150fc263af1e3f525b165
Author: Lena Salman <esalman@qualcomm.com>
Date: Tue Jun 8 15:25:47 2010 +0300
spi_qsd: Add usage of MX_WRITE_COUNT register
Use MX_WRITE_COUNT register to reduce the amount of TX interrupts in
FIFO mode for transfers smaller than FIFO size.
Change-Id: I7208fdc85b626a31a8b781ee5c56f73beee6c427
Signed-off-by: Lena Salman <esalman@qualcomm.com>
commit 7ed56f3441c5ebe7fd8107fb8468207a88bc743f
Author: Lena Salman <esalman@qualcomm.com>
Date: Wed Jun 9 16:14:44 2010 +0300
spi_qsd: Minor changes to support Data Mover mode on QUPe core
Minor changes to support Data Mover made on QUPe core.
Change-Id: I54663115a43f7fd9b52a2ddee796b5499d5f239a
Signed-off-by: Lena Salman <esalman@qualcomm.com>
commit a85fd0ab6484eb2ef404c062adffce1ee22337f1
Author: Lena Salman <esalman@qualcomm.com>
Date: Thu Jun 3 13:57:02 2010 +0300
spi_qsd: Add support for QUPe controller
QUPe controller is a new version of Qualcomm SPI controller. The
controller also supports other peripheral protocols, however its SPI
functionality is very similar to previous SPI core, supported by spi_qsd.
Therefore the same driver is being utilized with some register address
modification and minor flow change.
Change-Id: Ic091ef2c2ed699b43f786c278b613e69a7e9039b
Signed-off-by: Lena Salman <esalman@qualcomm.com>
commit ce270f6f9198cf40ee5638b35e595da81116241e
Author: Jeff Ohlstein <johlstei@quicinc.com>
Date: Thu Apr 29 13:40:53 2010 -0700
drivers: spi: Support ADM3 in spi_qsd driver
Change-Id: I6dfa38a4c33a8e4619d56ce30787e1aeafc8356d
Signed-off-by: Jeff Ohlstein <johlstei@quicinc.com>
commit 47346fa611773ef92d12d9145ea33a7f2c79052f
Author: Lena Salman <esalman@qualcomm.com>
Date: Wed Apr 28 11:33:15 2010 +0300
spi_qsd: Add disable/enable of pclk to suspend/resume functions
Add disable/enable of pclk to suspend/resume functions to improve
power performance.
Change-Id: I871e5ac90a998f2942778bb1e8c2c9d583a9ae00
CRs-fixed: 235046
Signed-off-by: Lena Salman <esalman@qualcomm.com>
commit a96eba98fbbd21ac657f5d551466909352766ead
Author: Lena Salman <esalman@qualcomm.com>
Date: Sun Apr 11 10:40:37 2010 +0300
spi_qsd: Making irq code implicit for the core mode in use
Make code clear regarding what mode is in use in the irq.
Signed-off-by: Lena Salman <esalman@qualcomm.com>
commit 6a02d85f8f48cf6f86cddc38c9fce9c1179208b4
Author: Lena Salman <esalman@qualcomm.com>
Date: Tue Apr 13 21:16:45 2010 +0300
spi_qsd: Separate tx/rx/error statistics between contexts
To improve SMP safety, separate the tx/error statistics between
contexts. This protects the statistics from accidentally being
access from another context at the same time.
Change-Id: Ibc52406e7b06a4bb5142f8a09a2f35442cb9df8a
Signed-off-by: Lena Salman <esalman@qualcomm.com>
commit 31f301c171aab8e42f8b6abe9b7866412cb546a8
Author: Lena Salman <esalman@qualcomm.com>
Date: Tue Mar 23 14:51:00 2010 +0200
spi_qsd: Add better handling for pending transfers during suspend
To improve SMP safety, add better handling in suspend function to wait
for graceful closure of pending transfers. This graceful closure waits
for all the pending transfers to finish or timeout, while not allowing new
ones to queue up. This allows correct handling of all the resources
involved in a transfer before suspend.
Signed-off-by: Lena Salman <esalman@qualcomm.com>
commit 8fbf6e4c5371520b5f9de2001e2ebd15773e918b
Author: Lena Salman <esalman@qualcomm.com>
Date: Thu Mar 25 10:44:10 2010 +0200
spi_qsd: Add mutex to get exclusive access to controller registers
To improve SMP safety, add mutex to get exclusive access to controller
registers.
Signed-off-by: Lena Salman <esalman@qualcomm.com>
commit 9405adda67d8c6a856243e599f09d806b4bc6de5
Author: Kenneth Heitke <kheitke@quicinc.com>
Date: Thu Apr 15 16:33:16 2010 -0600
spi_qsd: Move global input_fifo_size to device context.
Fix reference to device data input_fifo_size which is missing from the
previous patch.
Change-Id: Ia469896edd0fd90d7ded2b8ec44f9075474b3ec8
Signed-off-by: Kenneth Heitke <kheitke@quicinc.com>
commit 6031094ca6a940a47437bc6a092e813b4bc41d2a
Author: Lena Salman <esalman@qualcomm.com>
Date: Sun Apr 11 10:34:48 2010 +0300
spi_qsd: Move global input_fifo_size to device context.
To improve SMP safety move global variable input_fifo_size to device
context.
Signed-off-by: Lena Salman <esalman@qualcomm.com>
commit 97f585033413b1f8ae210bbffd617a4af3462982
Author: Lena Salman <esalman@qualcomm.com>
Date: Wed Apr 14 18:35:54 2010 +0300
spi_qsd: Initial contribution of the MSM SPI driver
This adds MSM SPI controller driver. The driver is SPI master, and
allows slave connections. Current version of the driver supports
FIFO and DM modes chosen upon the message size. The driver also
supports loopback mode which can be used for testing purposes.
This is a squashed version of all the MSM SPI driver changes on the QuIC
MSM 2.6.29 kernel which can be found at www.codeaurora.org.
It also contains all relevant adaptations to SPI core changes in 2.6.32
kernel.
https://www.codeaurora.org/gitweb/quic/la/?p=kernel/msm.git;a=blob;f=drivers/spi/spi_qsd.c;h=1c8e3ec727b29040648ef9a4949396f7109528ae;hb=refs/heads/android-msm-2.6.29b
Change-Id: Ibc1e71deb662af87deed77f10dcc8a3a46a8f012
Signed-off-by: Lena Salman <esalman@qualcomm.com>
Signed-off-by: David Brown <davidb@codeaurora.org>
Add a gpio_chip driver to support the Qualcomm SPMI PMIC
architecture called QPNP. The driver supports Device Tree
and allows a device_node to be registered as a gpio-controller.
The driver also specifies APIs to allow a non-Device Tree user
the ability to configure the PMIC GPIOs.
This driver does not handle interrupts for GPIOs directly.
Instead, that work is handled by the existing qpnp-int driver.
This is feasible since the interrupt register map for all
QPNP peripherals is the same.
Change-Id: I04eb39d9855b0957f0647010fcb203ec2fc83c7c
Signed-off-by: Michael Bohan <mbohan@codeaurora.org>
QUP (Qualcomm Universal Peripheral engine) hardware provides FIFO
based data path to mini cores like I2C. i2c-qup driver communicates
with the QUP and its FIFOs.
Advantages of this driver include 1-interrupt per FIFO/BLOCK number
of byte unlike 1-interrupt-per-byte of i2c-msm.
Since the QUP hardware communicates with I2C mini core, and this
driver communicates with QUP hardware, driver communicating with
I2C hardware directly (like i2c-msm) can't be used to communicate
with QUP. QUP has FIFO mode and BLOCK mode. FIFO mode can be used
if the data transfer size is less than FIFO size. BLOCK mode should
be used for transfers greater than FIFO size.
FIFO mode is supported in this initial implementation.
Signed-off-by: Sagar Dharia <sdharia@quicinc.com>
This is a combination of 13 commits.
commit 59a27ca89fb515caeac2b97059832515566f70d9
Author: John Howe <jhowe@codeaurora.org>
Date: Tue Jan 4 17:18:54 2011 -0500
hw_random: Add Qualcomm MSM random number driver
This driver uses the hardware random number generator on MSM chips.
Change-Id: I13b4d831fb9b5487356af466536a9005107ff723
Signed-off-by: John Howe <jhowe@codeaurora.org>
commit 09cae33a80706e0aa77bdc4e1b493ef2a36dbbde
Author: John Howe <jhowe@codeaurora.org>
Date: Fri Jan 14 10:21:05 2011 -0500
hw_random: add PRNG clock control
Change-Id: I6d9dd2ee7c50020fb8d41242b655e172e4c9eff2
Signed-off-by: John Howe <jhowe@codeaurora.org>
commit 0573eda3ce19c01825ded4fe850362c37460dc20
Author: John Howe <jhowe@codeaurora.org>
Date: Mon Jan 24 14:56:06 2011 -0500
hw_random: remove clk frequency control
The clock only supports one rate, 64MHz, and is set to that
rate by default.
Change-Id: I820c74e44f4ebdec7b891a4c89d681cb5c3dcee6
Signed-off-by: John Howe <jhowe@codeaurora.org>
commit fab0a4d40e18be4a31a4720acafb128893c620e8
Author: John Howe <jhowe@codeaurora.org>
Date: Tue Apr 12 14:48:51 2011 -0400
hw_random: Use memory barriers
Change-Id: Ie216141d7f6997266d8c5ed4bbd436f1be6551b8
Signed-off-by: John Howe <jhowe@codeaurora.org>
commit f07f1ba547790155db4c508ccfa58b64c967fe8e
Author: Raj Kushwaha <rajk@codeaurora.org>
Date: Tue Jul 26 14:35:28 2011 -0700
hw_random: msm: Remove PRNG hardware configuration
LSFR and CONFIG registers are configured by secure domain
code and XPU protected.
CRs-Fixed: 284133
Signed-off-by: Mona Hossain <mhossain@codeaurora.org>
(cherry picked from commit a4f802b0f5d0faee9e83020c599b2f4b0b27de5f)
Change-Id: Ie73cc3a95d1e2fff970e4d71f15fc1cbb4ead11c
Signed-off-by: Raj Kushwaha <rajk@codeaurora.org>
commit 26cef0c9d572e55df0f17dc4a5de380595eddaeb
Author: Matt Wagantall <mattw@codeaurora.org>
Date: Thu Aug 11 17:19:31 2011 -0700
msm: clock: Use device names to distinguish between PRNG clocks
Drivers should now use their device names to distinguish between
clocks of the same type rather than the clock name. This allows
the clock names to be updated to match the new naming convention.
Change-Id: Ibf00fd3d406adb04299e3e79e379d4fefe70f2b4
Signed-off-by: Matt Wagantall <mattw@codeaurora.org>
commit 5ad373931744ae98289ec680334d7cc0bee1c0b6
Author: Ramesh Masavarapu <rameshm@codeaurora.org>
Date: Mon Oct 10 10:44:10 2011 -0700
msm: Add PRNG to MSM9615 device.
Add configuration parameters for MSM9615 device.
PRNG hardware registers initialization in msm_rng.c is done
currently for MSM9615.
Change-Id: I2a05e9e582ce94a25bec71e1acaee95d62cd9469
Signed-off-by: Ramesh Masavarapu <rameshm@codeaurora.org>
commit 2f963dbc78c6c0703f51466b2b242287a2df5487
Author: Ramesh Masavarapu <rameshm@codeaurora.org>
Date: Thu Oct 20 15:33:50 2011 -0700
msm: Removed target specific changes for enabling PRNG h/w.
The driver checks if the PRNG h/w is enabled. If it is not ON, it
enables the PRNG h/w.
Change-Id: I7c73eba7ba47f4fca116cfe0884758e6dd130ed0
Signed-off-by: Ramesh Masavarapu <rameshm@codeaurora.org>
commit 46af59fb8f4bce302ad4d787b63b25e46548df6a
Author: Stepan Moskovchenko <stepanm@codeaurora.org>
Date: Tue Feb 7 14:38:59 2012 -0800
msm: rng: Disable RNG init on APQ8064
Change-Id: Ic42a85c51faea8a17b02eb4987d0f5db732716c2
Signed-off-by: Stepan Moskovchenko <stepanm@codeaurora.org>
commit a54263b0056b15cad1336a33d57bb1db013e8abb
Author: Ramesh Masavarapu <rameshm@codeaurora.org>
Date: Wed Feb 1 22:49:01 2012 -0800
msm: Removed XPU violations.
During initialization, there is a violation in writing to
"read only" registers for targets that support trust zone.
Trustzone marks certain registers as read-only.
This change fixes the issue by writing to registers only
on targets that do not support trust zone.
Change-Id: I69bb0f1bad199201aa3dd8b378ca1683dfa81c86
Signed-off-by: Ramesh Masavarapu <rameshm@codeaurora.org>
commit a99fcc24e94481134ca22f9778e88ed31646d6e3
Author: Ramesh Masavarapu <rameshm@codeaurora.org>
Date: Wed Feb 22 14:30:32 2012 -0800
Revert "msm: rng: Disable RNG init on APQ8064"
This reverts commit 46af59fb8f4bce302ad4d787b63b25e46548df6a.
The RNG driver was initially disabled because of missing clock
changes and this driver was causing boot up issues.
Now with the clock changes checked in the RNG driver works.
Change-Id: I127f25c8be6b715510c1fb16b274a814416d8a8a
Signed-off-by: Ramesh Masavarapu <rameshm@codeaurora.org>
commit 801c392ab9ee2893c6f3ca506e43afa62798890b
Author: Ramesh Masavarapu <rameshm@codeaurora.org>
Date: Tue Apr 24 16:28:00 2012 -0700
prng: Replace clk_enable and clk_disable APIs.
The clk driver has introduced new clock APIs that replace
the existing clk_enable and clk_disable.
-clk_enable() APIs is replaced with clk_prepare_enable().
-clk_disable() API is replaced with clk_disable_unprepare().
Change-Id: Ib6c452e7dc3f357497eae5a9302a7352a19fcb18
Signed-off-by: Ramesh Masavarapu <rameshm@codeaurora.org>
commit de991f08a8738dc66e65488aebed472de65ce237
Author: Hariprasad Dhalinarasimha <hnamgund@codeaurora.org>
Date: Thu May 31 13:15:51 2012 -0700
PRNG: Device tree entry for qrng device.
Cleanup platorm device entry & add device tree entry
Change-Id: I5bde944d63276a3aaf00b7415066963027f11249
Signed-off-by: Hariprasad Dhalinarasimha <hnamgund@codeaurora.org>
commit a4100a4a6e2a1843645d3eff22dabb387d4cbb61
Author: Stephen Boyd <sboyd@codeaurora.org>
Date: Mon Jun 25 15:48:37 2012 -0700
msm-rng: Fix PRNG_LFSR_CFG setup
Changes to only configure the LFSR on devices that don't have the
prng hardware already setup mistakenly removed the LFSR
configuration. Instead, the change is ORing in 1s into the top 16
bits of the register (they're marked as reserved).
Restore the original code by masking off the lower 16 bits of the
register and filling them with values from the
PRNG_LFSR_CFG_CLOCKS define.
Change-Id: Idd0df7b49175c211eec5ea778733ae81f5bc8188
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
commit 0bef6ede4b779c19091234e20ecfbb76a44edac0
Author: Hariprasad Dhalinarasimha <hnamgund@codeaurora.org>
Date: Wed Nov 7 19:47:21 2012 -0800
msm: rng: Add support for iface clk
Currently the driver supports only enabling core_clk,but on
certain targets, iface_clk is used for the hardware RNG
block. This fix adds compatibility to targets that have iface
clock instead of the core clock.
Change-Id: I480c3c7070e09f945439ea48e6877c7170ceeeb9
Signed-off-by: Hariprasad Dhalinarasimha <hnamgund@codeaurora.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Add runtime DT support and documentation for the Cortex A7/A15
architected timers.
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Conflicts:
[Resolve conflicts for adding support for the feature
ARCH_HAS_READ_CURRENT_TIMER]
arch/arm/kernel/arch_timer.c
Change-Id: I4b1d1dc2a8c69466497423475f7a3dd4d2c380c1
Signed-off-by: Sathish Ambley <sambley@codeaurora.org>
(cherry picked from commit f2caa5109ee0ce7d988d864207e06fdb19e75c39)
Pull sound sound fixes from Takashi Iwai:
"As good as nothing exciting here; just a few trivial fixes for various
ASoC stuff."
* tag 'sound-3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ASoC: omap-pcm: Free dma buffers in case of error.
ASoC: s3c2412-i2s: Fix dai registration
ASoC: wm8350: Don't use locally allocated codec struct
ASoC: tlv312aic23: unbreak resume
ASoC: bf5xx-ssm2602: Set DAI format
ASoC: core: check of_property_count_strings failure
ASoC: dt: sgtl5000.txt: Add description for 'reg' field
ASoC: wm_hubs: Make sure we don't disable differential line outputs
SPEAr13xx series of SoCs contain Synopsys AHCI SATA Controller which shares
ahci_platform driver with other controller versions.
This patch updates DT compatible list for ahci_platform. It also updates and
renames binding documentation to more generic name.
Signed-off-by: Viresh Kumar <viresh.kumar@st.com>
Cc: Rob Herring <rob.herring@calxeda.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Pull "ARM: SoC fixes: from Olof Johansson:
"A bunch of fixes for regressions (and a few other problems) in
3.4-rc1:
- Fix for regression of mach/io.h cleanup on platforms with PCI or
PCMCIA (adding back the include file on those for now)
- AT91 fixes for usb and spi
- smsc911x ethernet fixes for i.MX
- smsc911x fixes for OMAP
- gpio fixes for Tegra
- A handful of build error and warning fixes for various platforms
- cpufreq kconfig dependencies, build and lowlevel debug fixes for
Samsung platforms
In other words, more or less the regular collection of -rc1/2 type
material. A few of them, in particular the smsc911x for OMAP series,
aren't technically regressions for 3.4, but they're valid fixes and
we're still relatively early in the rc cycle so it seems appropriate
to include them."
* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (60 commits)
ARM: fix __io macro for PCMCIA
ARM: EXYNOS: Fix compiler warning in dma.c file
ARM: EXYNOS: fix ISO C90 warning
ARM: OMAP2+: hwmod: Fix wrong SYSC_TYPE1_XXX_MASK bit definitions
ARM: OMAP2+: hwmod: Make omap_hwmod_softreset wait for reset status
ARM: OMAP2+: hwmod: Restore sysc after a reset
ARM: OMAP2+: omap_hwmod: Allow io_ring wakeup configuration for all modules
ARM: OMAP3: clock data: fill in some missing clockdomains
ARM: OMAP4: clock data: Force a DPLL clkdm/pwrdm ON before a relock
ARM: OMAP4: clock data: fix mult and div mask for USB_DPLL
ARM: OMAP2+: powerdomain: Wait for powerdomain transition in pwrdm_state_switch()
gpio: tegra: Iterate over the correct number of banks
gpio: tegra: fix register address calculations for Tegra30
EXYNOS: fix dependency for EXYNOS_CPUFREQ
ARM: at91: dt: remove unit-address part for memory nodes
ARM: at91: fix check of valid GPIO for SPI and USB
USB: ehci-atmel: add needed of.h header file
ARM: at91/NAND DT bindings: add comments
ARM: at91/at91sam9x5.dtsi: fix NAND ale/cle in DT file
USB: ohci-at91: trivial return code name change
...
Pull regulator fixes from Mark Brown:
"A bunch of smallish fixes that came up during the merge window as
things got more testing - even more fixes from Axel, a fix for error
handling in more complex systems using -EPROBE_DEFER and a couple of
small fixes for the new dummy regulators."
* tag 'regulator-3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: Remove non-existent parameter from fixed-helper.c kernel doc
regulator: Fix setting new voltage in s5m8767_set_voltage
regulator: fix sysfs name collision between dummy and fixed dummy regulator
regulator: Fix deadlock on removal of regulators with supplies
regulator: Fix comments in include/linux/regulator/machine.h
regulator: Only update [LDOx|DCx]_HIB_MODE bits in wm8350_[ldo|dcdc]_set_suspend_disable
regulator: Fix setting low power mode for wm831x aldo
regulator: Return microamps in wm8350_isink_get_current
regulator: wm8350: Fix the logic to choose best current limit setting
regulator: wm831x-isink: Fix the logic to choose best current limit setting
regulator: wm831x-dcdc: Fix the logic to choose best current limit setting
regulator: anatop: patching to device-tree property "reg".
regulator: Do proper shift to set correct bit for DC[2|5]_HIB_MODE setting
regulator: Fix restoring pmic.dcdcx_hib_mode settings in wm8350_dcdc_set_suspend_enable
regulator: Fix unbalanced lock/unlock in mc13892_regulator_probe error path
regulator: Fix set and get current limit for wm831x_buckv
regulator: tps6586x: Fix list minimal voltage setting for LDO0
Add comments to NAND "gpios" property to make it clearer.
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Pull MTD changes from David Woodhouse:
- Artem's cleanup of the MTD API continues apace.
- Fixes and improvements for ST FSMC and SuperH FLCTL NAND, amongst
others.
- More work on DiskOnChip G3, new driver for DiskOnChip G4.
- Clean up debug/warning printks in JFFS2 to use pr_<level>.
Fix up various trivial conflicts, largely due to changes in calling
conventions for things like dmaengine_prep_slave_sg() (new inline
wrapper to hide new parameter, clashing with rewrite of previously last
parameter that used to be an 'append' flag, and is now a bitmap of
'unsigned long flags').
(Also some header file fallout - like so many merges this merge window -
and silly conflicts with sparse fixes)
* tag 'for-linus-3.4' of git://git.infradead.org/mtd-2.6: (120 commits)
mtd: docg3 add protection against concurrency
mtd: docg3 refactor cascade floors structure
mtd: docg3 increase write/erase timeout
mtd: docg3 fix inbound calculations
mtd: nand: gpmi: fix function annotations
mtd: phram: fix section mismatch for phram_setup
mtd: unify initialization of erase_info->fail_addr
mtd: support ONFI multi lun NAND
mtd: sm_ftl: fix typo in major number.
mtd: add device-tree support to spear_smi
mtd: spear_smi: Remove default partition information from driver
mtd: Add device-tree support to fsmc_nand
mtd: fix section mismatch for doc_probe_device
mtd: nand/fsmc: Remove sparse warnings and errors
mtd: nand/fsmc: Add DMA support
mtd: nand/fsmc: Access the NAND device word by word whenever possible
mtd: nand/fsmc: Use dev_err to report error scenario
mtd: nand/fsmc: Use devm routines
mtd: nand/fsmc: Modify fsmc driver to accept nand timing parameters via platform
mtd: fsmc_nand: add pm callbacks to support hibernation
...
Pull battery updates from Anton Vorontsov:
"Various small bugfixes and enhancements, plus two new drivers:
- A quite complex ab8500 charger driver, submitted by Arun Murthy @
ST-Ericsson;
- Summit Microelectronics SMB347 Battery Charger, submitted by Bruce
E Robertson and Alan Cox @ Intel.
And that's all."
* tag 'for-v3.4-rc1' of git://git.infradead.org/battery-2.6: (36 commits)
max17042_battery: Clean up interrupt handling
Revert "max8998_charger: Include linux/module.h just once"
ab8500_fg: Fix some build warnings on x86_64
max17042_battery: Fix CHARGE_FULL representation.
max8998_charger: Include linux/module.h just once
power_supply: Convert i2c drivers to module_i2c_driver
lp8727_charger: Add MODULE_DEVICE_TABLE
charger-manager: Simplify charger_get_property(), get rid of a warning
charger-manager: Clean up for better readability
da9052-battery: Convert to use module_platform_driver
da9052-battery: Fix a memory leak when unload the module
da9052-battery: Add missing platform_set_drvdata
ab8500: Turn unneeded global symbols into local ones
ab8500_fg: Fix copy-paste error
ab8500_fg: Get rid of 'struct battery_type'
ab8500_fg: Get rid of 'struct v_to_cap'
ab8500_btemp: Get rid of 'enum adc_therm'
ab8500_charger: Convert to the new USB OTG calls
ab8500-btemp: AB8500 battery temperature driver
ab8500-fg: A8500 fuel gauge driver
...
Pull devicetree documentation update from Grant Likely.
* tag 'devicetree-for-linus' of git://git.secretlab.ca/git/linux-2.6:
dt: Linux DT usage model documentation
mtd: Move fdt partition documentation to a seperate file
v2: 2nd draft
- Editorial cleanups (Randy Dunlap and Stephen Warren)
- Added missing Microblaze reference (Stephen Neuendorffer)
- Make example of platform_device creation clearer (Shawn Guo)
- Expand on PowerPC history and mention i2c mess (David Gibson)
- convert to plain text (remove bits of html formating)
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Pull MMC updates from Chris Ball:
Core:
* Support for MMC 4.5 Data Tag feature -- we tag REQ_META, so devices
that support Data Tag will provide increased throughput for metadata.
* Faster detection of card removal on I/O errors.
Drivers:
* dw_mmc now supports eMMC Power Off Notify, has PCI support, and
implements pre_req and post_req for asynchronous requests.
* omap_hsmmc now supports device tree.
* esdhc now has power management support.
* sdhci-tegra now supports Tegra30 devices.
* sdhci-spear now supports hibernation.
* tmio_mmc now supports using a GPIO for card detection.
* Intel PCH now supports 8-bit bus transfers.
* tag 'mmc-merge-for-3.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: (53 commits)
mmc: sh_mmcif: simplify bitmask macros
mmc: sh_mobile_sdhi: support modular mmc-core with non-standard hotplug
mmc: sh_mobile_sdhi: add a callback for board specific init code
mmc: tmio: cosmetic: prettify the tmio_mmc_set_ios() function
mmc: sh_mobile_sdhi: do not manage PM clocks manually
mmc: tmio_mmc: remove unused sdio_irq_enabled flag
mmc: tmio_mmc: power status flag doesn't have to be exposed in platform data
mmc: sh_mobile_sdhi: pass card hotplug GPIO number to TMIO MMC
mmc: tmio_mmc: support the generic MMC GPIO card hotplug helper
mmc: tmio: calculate the native hotplug condition only once
mmc: simplify mmc_cd_gpio_request() by removing two parameters
mmc: sdhci-pci: allow 8-bit bus width for Intel PCH
mmc: sdhci: check interrupt flags in ISR again
mmc: sdhci-pci: Add MSI support
mmc: core: warn when card doesn't support HPI
mmc: davinci: Poll status for small size transfers
mmc: davinci: Eliminate spurious interrupts
mmc: omap_hsmmc: Avoid a regulator voltage change with dt
mmc: omap_hsmmc: Convert hsmmc driver to use device tree
mmc: sdhci-pci: add SDHCI_QUIRK2_HOST_OFF_CARD_ON for Medfield SDIO
...
Partitions are described in the same way for all mtd devices when using
devicetree, move the documentation to a separate file and add references
to it.
Signed-off-by: Jamie Lentin <jm@lentin.co.uk>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Jason Cooper <jason@lakedaemon.net>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Pull GPIO changes for v3.4 from Grant Likely:
"Primarily gpio device driver changes with some minor side effects
under arch/arm and arch/x86. Also includes a few core changes such as
explicitly supporting (electrical) open source and open drain outputs
and some help for parsing gpio devicetree properties."
Fix up context conflict due to Laxman Dewangan adding sleep control for
the tps65910 driver separately for gpio's and regulators.
* tag 'gpio-for-linus' of git://git.secretlab.ca/git/linux-2.6: (34 commits)
gpio/ep93xx: Remove unused inline function and useless pr_err message
gpio/sodaville: Mark broken due to core irqdomain migration
gpio/omap: fix redundant decoding of gpio offset
gpio/omap: fix incorrect update to context.irqenable1
gpio/omap: fix incorrect context restore logic in omap_gpio_runtime_*
gpio/omap: fix missing dataout context save in _set_gpio_dataout_reg
gpio/omap: fix _set_gpio_irqenable implementation
gpio/omap: fix trigger type to unsigned
gpio/omap: fix wakeup_en register update in _set_gpio_wakeup()
gpio: tegra: tegra_gpio_config shouldn't be __init
gpio/davinci: fix enabling unbanked GPIO IRQs
gpio/davinci: fix oops on unbanked gpio irq request
gpio/omap: Fix section warning for omap_mpuio_alloc_gc()
ARM: tegra: export tegra_gpio_{en,dis}able
gpio/gpio-stmpe: Fix the value returned by _get_value routine
Documentation/gpio.txt: Explain expected pinctrl interaction
GPIO: LPC32xx: Add output reading to GPO P3
GPIO: LPC32xx: Fix missing bit selection mask
gpio/omap: fix wakeups on level-triggered GPIOs
gpio/omap: Fix IRQ handling for SPARSE_IRQ
...
Pull MFD changes from Samuel Ortiz:
- 4 new drivers: Freescale i.MX on-chip Anatop, Ricoh's RC5T583 and
TI's TPS65090 and TPS65217.
- New variants support (8420, 8520 ab9540), cleanups and bug fixes for
the abx500 and db8500 ST-E chipsets.
- Some minor fixes and update for the wm8994 from Mark.
- The beginning of a long term TWL cleanup effort coming from the TI
folks.
- Various fixes and cleanups for the s5m, TPS659xx, pm860x, and MAX8997
drivers.
Fix up trivial conflicts due to duplicate patches and header file
cleanups (<linux/device.h> removal etc).
* tag 'mfd_3.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: (97 commits)
gpio/twl: Add DT support to gpio-twl4030 driver
gpio/twl: Allocate irq_desc dynamically for SPARSE_IRQ support
mfd: Detach twl6040 from the pmic mfd driver
mfd: Replace twl-* pr_ macros by the dev_ equivalent and do various cleanups
mfd: Micro-optimization on twl4030 IRQ handler
mfd: Make twl4030 SIH SPARSE_IRQ capable
mfd: Move twl-core IRQ allocation into twl[4030|6030]-irq files
mfd: Remove references already defineid in header file from twl-core
mfd: Remove unneeded header from twl-core
mfd: Make twl-core not depend on pdata->irq_base/end
ARM: OMAP2+: board-omap4-*: Do not use anymore TWL6030_IRQ_BASE in board files
mfd: Return twl6030_mmc_card_detect IRQ for board setup
Revert "mfd: Add platform data for MAX8997 haptic driver"
mfd: Add support for TPS65090
mfd: Add some da9052-i2c section annotations
mfd: Build rtc5t583 only if I2C config is selected to y.
mfd: Add anatop mfd driver
mfd: Fix compilation error in tps65910.h
mfd: Add 8420 variant to db8500-prcmu
mfd: Add 8520 PRCMU variant to db8500-prcmu
...
Pull "ARM: More device tree support updates" from Olof Johansson:
"This branch contains a number of updates for device tree support on
several ARM platforms, in particular:
* AT91 continues the device tree conversion adding support for a
number of on-chip drivers and other functionality
* ux500 adds probing of some of the core SoC blocks through device
tree
* Initial device tree support for ST SPEAr600 platforms
* kirkwood continues the conversion to device-tree probing"
Manually merge arch/arm/mach-ux500/Kconfig due to MACH_U8500 rename, and
drivers/usb/gadget/at91_udc.c due to header file include cleanups.
Also do an "evil merge" for the MACH_U8500 config option rename that the
affected RMI4 touchscreen driver in staging. It's called MACH_MOP500
now, and it was missed during previous merges.
* tag 'dt2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (48 commits)
ARM: SPEAr600: Add device-tree support to SPEAr600 boards
ARM: ux500: Provide local timer support for Device Tree
ARM: ux500: Enable PL022 SSP Controller in Device Tree
ARM: ux500: Enable PL310 Level 2 Cache Controller in Device Tree
ARM: ux500: Enable PL011 AMBA UART Controller for Device Tree
ARM: ux500: Enable Cortex-A9 GIC (Generic Interrupt Controller) in Device Tree
ARM: ux500: db8500: list most devices in the snowball device tree
ARM: ux500: split dts file for snowball into generic part
ARM: ux500: combine the board init functions for DT boot
ARM: ux500: Initial Device Tree support for Snowball
ARM: ux500: CONFIG: Enable Device Tree support for future endeavours
ARM: kirkwood: use devicetree for rtc-mv
ARM: kirkwood: rtc-mv devicetree bindings
ARM: kirkwood: fdt: define uart[01] as disabled, enable uart0
ARM: kirkwood: fdt: facilitate new boards during fdt migration
ARM: kirkwood: fdt: absorb kirkwood_init()
ARM: kirkwood: fdt: use mrvl ticker symbol
ARM: orion: wdt: use resource vice direct access
ARM: Kirkwood: Remove tclk from kirkwood_asoc_platform_data.
ARM: orion: spi: remove enable_clock_fix which is not used
...
Change "reg" to "anatop-reg-offset" due to there is a warning of handling no
size field in reg.
This patch also adds the missing device-tree binding documentation.
Signed-off-by: Ying-Chun Liu (PaulLiu) <paul.liu@linaro.org>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Pull "ARM: device tree work" from Arnd Bergmann:
"Most of these patches convert code from using static platform data to
describing the hardware in the device tree. This is only the first
half of the changes for v3.4 because a lot of patches for this topic
came in the last week before the merge window.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>"
Fix up trivial conflicts in arch/arm/mach-vexpress/{Kconfig,core.h}
* tag 'dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (86 commits)
Document: devicetree: add OF documents for arch-mmp
ARM: dts: append DTS file of pxa168
ARM: mmp: append OF support on pxa168
ARM: mmp: enable rtc clk in pxa168
i2c: pxa: add OF support
serial: pxa: add OF support
arm/dts: mt_ventoux: very basic support for TeeJet Mt.Ventoux board
ARM: OMAP2+: Remove extra ifdefs for board-generic
ARM: OMAP2+: Fix build error when only ARCH_OMAP2/3 or 4 is selected
ASoC: DT: Add digital microphone binding to PAZ00 board.
ARM: dt: Add ARM PMU to tegra*.dtsi
ARM: at91: at91sam9x5cm/dt: add leds support
ARM: at91: usb_a9g20/dt: add gpio-keys support
ARM: at91: at91sam9m10g45ek/dt: add gpio-keys support
ARM: at91: at91sam9m10g45ek/dt: add leds support
ARM: at91: usb_a9g20/dt: add leds support
ARM: at91/pio: add new PIO3 features
ARM: at91: add sam9_smc.o to at91sam9x5 build
ARM: at91/tc/clocksource: Add 32 bit variant to Timer Counter
ARM: at91/tc: add device tree support to atmel_tclib
...
Pull "ARM: driver specific updates" from Arnd Bergmann:
"These are all specific to some driver. They are typically the
platform side of a change in the drivers directory, such as adding a
new driver or extending the interface to the platform. In cases where
there is no maintainer for the driver, or the maintainer prefers to
have the platform changes in the same branch as the driver changes,
the patches to the drivers are included as well.
A much smaller set of driver updates that depend on other branches
getting merged first will be sent later.
The new export of tegra_chip_uid conflicts with other changes in
fuse.c. In rtc-sa1100.c, the global removal of IRQF_DISABLED
conflicts with the cleanup of the interrupt handling of that driver.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>"
Fixed up aforementioned trivial conflicts.
* tag 'drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (94 commits)
ARM: SAMSUNG: change the name from s3c-sdhci to exynos4-sdhci
mmc: sdhci-s3c: add platform data for the second capability
ARM: SAMSUNG: support the second capability for samsung-soc
ARM: EXYNOS: add support DMA for EXYNOS4X12 SoC
ARM: EXYNOS: Add apb_pclk clkdev entry for mdma1
ARM: EXYNOS: Enable MDMA driver
regulator: Remove bq24022 regulator driver
rtc: sa1100: add OF support
pxa: magician/hx4700: Convert to gpio-regulator from bq24022
ARM: OMAP3+: SmartReflex: fix error handling
ARM: OMAP3+: SmartReflex: fix the use of debugfs_create_* API
ARM: OMAP3+: SmartReflex: micro-optimization for sanity check
ARM: OMAP3+: SmartReflex: misc cleanups
ARM: OMAP3+: SmartReflex: move late_initcall() closer to its argument
ARM: OMAP3+: SmartReflex: add missing platform_set_drvdata()
ARM: OMAP3+: hwmod: add SmartReflex IRQs
ARM: OMAP3+: SmartReflex: clear ERRCONFIG_VPBOUNDINTST only on a need
ARM: OMAP3+: SmartReflex: Fix status masking in ERRCONFIG register
ARM: OMAP3+: SmartReflex: Add a shutdown hook
ARM: OMAP3+: SmartReflex Class3: disable errorgen before disable VP
...
Conflicts:
arch/arm/mach-tegra/Makefile
arch/arm/mach-tegra/fuse.c
drivers/rtc/rtc-sa1100.c
Pull "ARM: timer cleanup work" from Arnd Bergmann:
"These are split out from the generic soc and driver updates because
there was a lot of conflicting work by multiple people. Marc Zyngier
worked on simplifying the "localtimer" interfaces, and some of the
platforms are touching the same code as they move to device tree based
booting.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>"
* tag 'timer' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (61 commits)
ARM: tegra: select USB_ULPI if USB is selected
arm/tegra: pcie: fix return value of function
ARM: ux500: fix compilation after local timer rework
ARM: shmobile: remove additional __io() macro use
ARM: local timers: make the runtime registration interface mandatory
ARM: local timers: convert MSM to runtime registration interface
ARM: local timers: convert exynos to runtime registration interface
ARM: smp_twd: remove old local timer interface
ARM: imx6q: convert to twd_local_timer_register() interface
ARM: highbank: convert to twd_local_timer_register() interface
ARM: ux500: convert to twd_local_timer_register() interface
ARM: shmobile: convert to twd_local_timer_register() interface
ARM: tegra: convert to twd_local_timer_register() interface
ARM: plat-versatile: convert to twd_local_timer_register() interface
ARM: OMAP4: convert to twd_local_timer_register() interface
ARM: smp_twd: add device tree support
ARM: smp_twd: add runtime registration support
ARM: local timers: introduce a new registration interface
ARM: smp_twd: make local_timer_stop a symbol instead of a #define
ARM: mach-shmobile: default to no earlytimer
...
Define dt bindings for the ti-omap-hsmmc, and adapt the driver to extract
data (which was earlier passed as platform_data) from device tree.
Signed-off-by: Rajendra Nayak <rnayak@ti.com>
Acked-by: Rob Herring <rob.herring@calxeda.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
This patch adds support to configure the FSMC NAND driver (used amongst
others on SPEAr platforms) via device-tree instead of platform_data.
Signed-off-by: Stefan Roese <sr@denx.de>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
The pxa regulator branch removes the bq24022 driver, while a lot of
other regulator drivers got added in the regulator tree. This
resolves the trivial conflicts by merging in the regulator patches
that are already merged into v3.4.
Conflicts:
drivers/regulator/Kconfig
drivers/regulator/Makefile
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Pull i2c embedded updates from Wolfram Sang:
"Nothing special from i2c-embedded for this merge window. Two new
drivers, minor feature additions, bugfixes, cleanups.
All patches have been in linux-next for some time, too."
* 'i2c-embedded/for-3.4' of git://git.pengutronix.de/git/wsa/linux:
i2c-eg20t: Remove write-only variables
i2c-eg20t: Rework pch_i2c_wait_for_bus_idle to reduce wait time
i2c-s3c2410: Add stub runtime power management
i2c-s3c2410: Convert to devm_kzalloc()
i2c: add CSR SiRFprimaII on-chip I2C controllers driver
i2c: tegra: Remove unnecessary write to INT_STATUS
i2c: imx: fix imx driver to work though signal is pending
i2c: designware: dw_i2c_init_driver as subsys initcall
misc: at24: describe platform_data with kernel_doc
i2c: Move I2C_EG20T option to the right place.
i2c: Support for Netlogic XLR/XLS I2C controller.
i2c: mpc: Add support for SMBUS_READ_BLOCK_DATA
i2c: versatile: Add Device Tree support
Pull input subsystem updates from Dmitry Torokhov:
"- we finally merged driver for USB version of Synaptics touchpads
(I guess most commonly found in IBM/Lenovo keyboard/touchpad combo);
- a bunch of new drivers for embedded platforms (Cypress
touchscreens, DA9052 OnKey, MAX8997-haptic, Ilitek ILI210x
touchscreens, TI touchscreen);
- input core allows clients to specify desired clock source for
timestamps on input events (EVIOCSCLOCKID ioctl);
- input core allows querying state of all MT slots for given event
code via EVIOCGMTSLOTS ioctl;
- various driver fixes and improvements."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (45 commits)
Input: ili210x - add support for Ilitek ILI210x based touchscreens
Input: altera_ps2 - use of_match_ptr()
Input: synaptics_usb - switch to module_usb_driver()
Input: convert I2C drivers to use module_i2c_driver()
Input: convert SPI drivers to use module_spi_driver()
Input: omap4-keypad - move platform_data to <linux/platform_data>
Input: kxtj9 - who_am_i check value and initial data rate fixes
Input: add driver support for MAX8997-haptic
Input: tegra-kbc - revise device tree support
Input: of_keymap - add device tree bindings for simple key matrices
Input: wacom - fix physical size calculation for 3rd-gen Bamboo
Input: twl4030-vibra - really switch from #if to #ifdef
Input: hp680_ts_input - ensure arguments to request_irq and free_irq are compatible
Input: max8925_onkey - avoid accessing input device too early
Input: max8925_onkey - allow to be used as a wakeup source
Input: atmel-wm97xx - convert to dev_pm_ops
Input: atmel-wm97xx - set driver owner
Input: add cyttsp touchscreen maintainer entry
Input: cyttsp - remove useless checks in cyttsp_probe()
Input: usbtouchscreen - add support for Data Modul EasyTouch TP 72037
...
Pull updates of sound stuff from Takashi Iwai:
"Here is the first big update chunk of sound stuff for 3.4-rc1.
In the common sound infrastructure, there are a few changes for
dynamic PCM support (used in ASoC) and a few clean-ups. Majority of
changes are found, as usual, in HD-audio and ASoC.
Some highlights of HD-audio changes:
- All the long-standing static quirk codes for Realtek codec were
finally removed by fixing and extending the Realtek auto-parser.
- The mute-LED control is standardized over all HD-audio codec
drivers using the extended vmaster hook.
- The vmaster slave mixer elements are initialized to 0dB as default
so that the user won't be annoyed by the silent output after
updates, e.g. due to the additions of new elements.
- Other many fix-ups for the misc HD-audio devices.
In the ASoC side, this is a very active release, including a quite a
few framework enhancements. Some highlights:
- Support for widgets not associated with a CODEC, an important part
of the dynamic PCM framework.
- A library factoring out the common code shared by dmaengine based
DMA drivers contributed by Lars-Peter Clausen. This will save a
lot of code and make it much easier to deploy enhancements to
dmaengine.
- Support for binary controls, used for providing runtime
configuration of algorithm coefficients.
- A new DAPM widget type for regulator supplies allowing drivers for
devices that can power down unused supplies while active to do
without any per-driver code.
- DAPM widgets for DAIs, initially giving a speed boost for playback
startup and shutdown and also the basis for CODEC<->CODEC DAI link
support.
- Support for specifying the number of significant bits on audio
interfaces, useful for allowing applications to know how much
effort to put into generating data for a larger sample format.
- Conversion of the FSI driver used on some SH processors to
DMAEngine.
- Conversion of EP93xx drivers to DMAEngine.
- New CODEC drivers for Maxim MAX9768 and Wolfson Microelectronics
WM2200.
- Move audmux driver from arc/arm to sound/soc
- McBSP move from arch/ to sound/ and updates
Also, a few small updates and fixes for other drivers like au88x0,
ymfpci, USB 6fire, USB usx2yaudio are included."
* tag 'sound-3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (446 commits)
ASoC: wm8994: Provide VMID mode control and fix default sequence
ASoC: wm8994: Add missing break in resume
ASoC: wm_hubs: Don't actively manage LINEOUT_VMID_BUF
ASoC: pxa-ssp: atomically set stream active masks
ASoC: fsl: p1022ds: tell the WM8776 codec driver that it's the master
ASoC: Samsung: Added to support mono recording
ALSA: hda - Fix build with CONFIG_PM=n
ALSA: au88x0 - Avoid possible Oops at unbinding
ALSA: usb-audio - Fix build error by consitification of rate list
ASoC: core: Fix obscure leak of runtime array
ALSA: pcm - Avoid GFP_ATOMIC in snd_pcm_link()
ALSA: pcm: Constify the list in snd_pcm_hw_constraint_list
ASoC: wm8996: Add 44.1kHz support
ALSA: hda - Fix build of patch_sigmatel.c without CONFIG_SND_HDA_POWER_SAVE
ASoC: mx27vis-aic32x4: Convert it to platform driver
ALSA: hda - fix printing of high HDMI sample rates
ALSA: ymfpci - Fix legacy registers on S3/S4 resume
ALSA: control - Fixe a trailing white space error
ALSA: hda - Add expose_enum_ctl flag to snd_hda_add_vmaster_hook()
ALSA: hda - Add "Mute-LED Mode" enum control
...
Add the DT support for the I2C GPIO expander inside the twl4030.
Note: The pdata parameters still have to be properly adapted using
dedicated bindings.
Signed-off-by: Benoit Cousson <b-cousson@ti.com>
Acked-by: Felipe Balbi <balbi@ti.com>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Pull powerpc merge from Benjamin Herrenschmidt:
"Here's the powerpc batch for this merge window. It is going to be a
bit more nasty than usual as in touching things outside of
arch/powerpc mostly due to the big iSeriesectomy :-) We finally got
rid of the bugger (legacy iSeries support) which was a PITA to
maintain and that nobody really used anymore.
Here are some of the highlights:
- Legacy iSeries is gone. Thanks Stephen ! There's still some bits
and pieces remaining if you do a grep -ir series arch/powerpc but
they are harmless and will be removed in the next few weeks
hopefully.
- The 'fadump' functionality (Firmware Assisted Dump) replaces the
previous (equivalent) "pHyp assisted dump"... it's a rewrite of a
mechanism to get the hypervisor to do crash dumps on pSeries, the
new implementation hopefully being much more reliable. Thanks
Mahesh Salgaonkar.
- The "EEH" code (pSeries PCI error handling & recovery) got a big
spring cleaning, motivated by the need to be able to implement a
new backend for it on top of some new different type of firwmare.
The work isn't complete yet, but a good chunk of the cleanups is
there. Note that this adds a field to struct device_node which is
not very nice and which Grant objects to. I will have a patch soon
that moves that to a powerpc private data structure (hopefully
before rc1) and we'll improve things further later on (hopefully
getting rid of the need for that pointer completely). Thanks Gavin
Shan.
- I dug into our exception & interrupt handling code to improve the
way we do lazy interrupt handling (and make it work properly with
"edge" triggered interrupt sources), and while at it found & fixed
a wagon of issues in those areas, including adding support for page
fault retry & fatal signals on page faults.
- Your usual random batch of small fixes & updates, including a bunch
of new embedded boards, both Freescale and APM based ones, etc..."
I fixed up some conflicts with the generalized irq-domain changes from
Grant Likely, hopefully correctly.
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (141 commits)
powerpc/ps3: Do not adjust the wrapper load address
powerpc: Remove the rest of the legacy iSeries include files
powerpc: Remove the remaining CONFIG_PPC_ISERIES pieces
init: Remove CONFIG_PPC_ISERIES
powerpc: Remove FW_FEATURE ISERIES from arch code
tty/hvc_vio: FW_FEATURE_ISERIES is no longer selectable
powerpc/spufs: Fix double unlocks
powerpc/5200: convert mpc5200 to use of_platform_populate()
powerpc/mpc5200: add options to mpc5200_defconfig
powerpc/mpc52xx: add a4m072 board support
powerpc/mpc5200: update mpc5200_defconfig to fit for charon board
Documentation/powerpc/mpc52xx.txt: Checkpatch cleanup
powerpc/44x: Add additional device support for APM821xx SoC and Bluestone board
powerpc/44x: Add support PCI-E for APM821xx SoC and Bluestone board
MAINTAINERS: Update PowerPC 4xx tree
powerpc/44x: The bug fixed support for APM821xx SoC and Bluestone board
powerpc: document the FSL MPIC message register binding
powerpc: add support for MPIC message register API
powerpc/fsl: Added aliased MSIIR register address to MSI node in dts
powerpc/85xx: mpc8548cds - add 36-bit dts
...
Pull regulator updates for 3.4 from Mark Brown:
"This has been a fairly quiet release from a regulator point of view,
the only real framework features added were devm support and a
convenience helper for setting up fixed voltage regulators.
We also added a couple of drivers (but will drop the BQ240022 driver
via the arm-soc tree as it's been replaced by the more generic
gpio-regulator driver) and Axel Lin continued his relentless and
generally awesome stream of fixes and cleanups."
* tag 'regulator-3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (93 commits)
regulator: Fix up a confusing dev_warn when DT lookup fails
regulator: Convert tps6507x to set_voltage_sel
regulator: Refactor tps6507x to use one tps6507x_pmic_ops for all LDOs and DCDCs
regulator: Make s5m8767_get_voltage_register always return correct register
regulator: s5m8767: Check pdata->buck[2|3|4]_gpiodvs earlier
regulator: tps65910: Provide settling time for DCDC voltage change
regulator: Add Anatop regulator driver
regulator: Simplify implementation of tps65912_get_voltage_dcdc
regulator: Use tps65912_set_voltage_sel for both DCDCx and LDOx
regulator: tps65910: Provide settling time for enabling rails
regulator: max8925: Use DIV_ROUND_UP macro
regulator: tps65912: Use simple equations to get register address
regulator: Fix the logic of tps65910_get_mode
regulator: Merge tps65217_pmic_ldo234_ops and tps65217_pmic_dcdc_ops to tps65217_pmic_ops
regulator: Use DIV_ROUND_CLOSEST in wm8350_isink_get_current
regulator: Use array to store dcdc_range settings for tps65912
regulator: Rename s5m8767_convert_voltage to s5m8767_convert_voltage_to_sel
regulator: tps6524x: Remove unneeded comment for N_REGULATORS
regulator: Rename set_voltage_sel callback function name to *_sel
regulator: Fix s5m8767_set_voltage_time_sel calculation value
...
Pull SPI changes for v3.4 from Grant Likely:
"Mostly a bunch of new drivers and driver bug fixes; but this also
includes a few patches that create a core message queue infrastructure
for the spi subsystem instead of making each driver open code it."
* tag 'spi-for-linus' of git://git.secretlab.ca/git/linux-2.6: (34 commits)
spi/fsl-espi: Make sure pm is within 2..32
spi/fsl-espi: make the clock computation easier to read
spi: sh-hspi: modify write/read method
spi: sh-hspi: control spi clock more correctly
spi: sh-hspi: convert to using core message queue
spi: s3c64xx: Fix build
spi: s3c64xx: remove unnecessary callback msg->complete
spi: remove redundant variable assignment
spi: release lock on error path in spi_pump_messages()
spi: Compatibility with direction which is used in samsung DMA operation
spi-topcliff-pch: add recovery processing in case wait-event timeout
spi-topcliff-pch: supports a spi mode setup and bit order setup by IO control
spi-topcliff-pch: Fix issue for transmitting over 4KByte
spi-topcliff-pch: Modify pci-bus number dynamically to get DMA device info
spi/imx: simplify error handling to free gpios
spi: Convert to DEFINE_PCI_DEVICE_TABLE
spi: add Broadcom BCM63xx SPI controller driver
SPI: add CSR SiRFprimaII SPI controller driver
spi-topcliff-pch: fix -Wuninitialized warning
spi: Mark spi_register_board_info() __devinit
...
